default search action
Computer-Aided Design, Volume 34
Volume 34, Number 1, January 2002
- Eric Béchet, Jean-Christophe Cuillière, François Trochu:
Generation of a finite element MESH from stereolithography (STL) files. 1-17 - Malgorzata A. Kulczycka, Louis J. Nachman:
Qualitative and quantitative comparisons of B-spline offset surface approximation methods. 19-26 - F. Zhang, Deyi Xue
:
Distributed database and knowledge base modeling for concurrent design. 27-40 - Yan Kit Siu, Sooi-thor Tan:
Source-based' heterogeneous solid modeling. 41-55 - Li Chen, Simon Li:
A computerized team approach for concurrent product and process design optimization. 57-69 - Yong Se Kim
Recognition of machining features for cast then machined parts. 71-87
Volume 34, Number 2, February 2002
- Bo Hyoung Kim, Byoung Kyu Choi:
Machining efficiency comparison direction-parallel tool path with contour-parallel tool path. 89-95 - Yan-Tao Li, Shi-Min Hu, Jia-Guang Sun:
A constructive approach to solving 3-D geometric constraint systems using dependence analysis. 97-108 - H. Zhu, Chia-Hsiang Menq:
B-Rep model simplification by automatic fillet/round suppressing for efficient automatic feature recognition. 109-123 - Hon-Yuen Tam
Iso-planar interpolation for the machining of implicit surfaces. 125-136 - Fehmi Cirak
Integrated modeling, finite-element analysis, and engineering design for thin-shell structures using subdivision. 137-148 - Jianbing Huang, Chia-Hsiang Menq:
Combinatorial manifold mesh reconstruction and optimization from unorganized points with arbitrary topology. 149-165 - Les A. Piegl, Wayne Tiller:
Algorithm for finding all k nearest neighbors. 167-172
Volume 34, Number 3, March 2002
- Djordje Brujic, Mihailo Ristic
Measurement-based modification of NURBS surfaces. 173-183 - Ke-Zhang Chen, Xin-An Feng, Quan-Sheng Lu:
Intelligent location-dimensioning of cylindrical surfaces in mechanical parts. 185-194 - Yoonhwan Woo, Hiroshi Sakurai:
Recognition of maximal features by volume decomposition. 195-207 - G. V. V. Ravi Kumar, K. G. Shastry, B. G. Prakash:
Computing non-self-intersecting offsets of NURBS surfaces. 209-228 - Syh-Shiuh Yeh, Pau-Lo Hsu:
Adaptive-feedrate interpolation for parametric curves with a confined chord error. 229-237 - Li Chen, Jian Pu, Xiankui Wang:
A general model for machinable features and its application to machinability evaluation of mechanical parts. 239-249 - C. Greg Jensen, W. Edward Red, J. Pi:
Tool selection for five-axis curvature matched machining. 251-266
Volume 34, Number 4, April 2002
- Mahadevan Balasubramaniam, Stephen Ho, Sanjay E. Sarma, Yoshitaka Adachi:
Generation of collision-free 5-axis tool paths using a haptic surface. 267-279 - K. P. Karunakaran, Shivamurthy Dibbi, P. Vivekananda Shanmuganathan
Efficient stock cutting for laminated manufacturing. 281-298 - S. C. Park, Y. C. Chung:
Offset tool-path linking for pocket machining. 299-308 - G. H. Liu, Yoke San Wong, Yunfeng Zhang, Han Tong Loh:
Adaptive fairing of digitized point data with discrete curvature. 309-320 - Weidong Geng, Jingbin Wang, Yiyang Zhang:
Embedding visual cognition in 3D reconstruction from multi-view engineering drawings. 321-336 - Deok-Soo Kim, Joonghyun Ryu
The conversion of a dynamic B-spline curve into piecewise polynomials in power form. 337-345
Volume 34, Number 5, April 2002
- Ke-Zhang Chen, Xin-An Feng, Lan Ding:
Intelligent approaches for generating assembly drawings from 3-D computer models of mechanical products. 347-355 - Chuang-Jang Chiou, Yuan-Shin Lee
A machining potential field approach to tool path generation for multi-axis sculptured surface machining. 357-371 - Stephen Mann
Generalization of the imprint method to general surfaces of revolution for NC machining. 373-378 - Cha-Soo Jun, Dong-Soo Kim, Sehyung Park:
A new curve-based approach to polyhedral machining. 379-389 - Erik L. J. Bohez:
Compensating for systematic errors in 5-axis NC machining. 391-403 - Baofu Li, Jin Liu:
Detail feature recognition and decomposition in solid model. 405-414 - Shi-Min Hu, Chiew-Lan Tai, Song-Hai Zhang:
An extension algorithm for B-splines by curve unclamping. 415-419
Volume 34, Number 6, May 2002
- Xiao-Shan Gao, Kun Jiang, Chang-Cai Zhu:
Geometric constraint solving with conics and linkages. 421-433 - Ben J. Hicks, Steve J. Culley:
An integrated modelling environment for the embodiment of mechanical systems. 435-451 - Taejung Kim, Sanjay E. Sarma:
Toolpath generation along directions of maximum kinematic performance; a first cut at machine-optimal paths. 453-468 - M. W. Fu
The application of surface visibility and moldability to parting line generation. 469-480 - Wei Sun, Xiaochun Hu:
Reasoning Boolean operation based modeling for heterogeneous objects. 481-488
Volume 34, Number 7, June 2002
- David F. Rogers:
Pierre Etienne Bézier (1910-1999), in memoriam. 489-491 - Christophe Rabut
On Pierre Bézier's life and motivations. 493-510 - Chih-Hsing Chu
Developable Bézier patches: properties and design. 511-527 - Octavian Soldea, Gershon Elber, Ehud Rivlin:
Exact and efficient computation of moments of free-form surface and trivariate based geometry. 529-539 - G. S. Hazen:
FastShip & NURBS modeling: a historical note. 541-543 - Andrew Mason:
MacSurf an early NURBS shiphull design system: a historical note. 545-546
Volume 34, Number 8, July 2002
- Hee-Kap Ahn
Separating an object from its cast. 547-559 - Zhengdong Huang, Derek Yip-Hoi:
High-level feature recognition using feature relationship graphs. 561-582 - K. C. Hui:
Free-form design using axial curve-pairs. 583-595 - Jonathan Cagan
A survey of computational approaches to three-dimensional layout problems. 597-611
Volume 34, Number 9, August 2002
- Utpal Roy, Balaji Bharadwaj:
Design with part behaviors: behavior model, representation and applications. 613-636 - Hongwei Lin, Ligang Liu, Guojin Wang:
Boundary evaluation for interval Bézier curve. 637-646 - Hsi-Yung Feng, Huiwen Li:
Constant scallop-height tool path generation for three-axis sculptured surface machining. 647-654 - Xiangyang Zhu, Han Ding:
Flatness tolerance evaluation: an approximate minimum zone solution. 655-664 - Ke-Zhang Chen, Xi-Wen Zhang, Zong-Ying Ou, Xin-An Feng:
Holo-extraction of information from paper drawings for 3D reconstruction. 665-677
Volume 34, Number 10, September 2002
- Imre Horváth, Dong-Yol Yang:
Rapid technologies: solutions for today and tomorrow. 679-682 - Seok-Hyung Bae, Byoung Kyu Choi:
NURBS surface fitting using orthogonal coordinate transform for rapid product development. 683-690 - Seok-Hee Lee, Ho-Chan Kim
STL file generation from measured point data by segmentation and Delaunay triangulation. 691-704 - Yan Kit Siu, Sooi-thor Tan:
Modeling the material grading and structures of heterogeneous objects for layered manufacturing. 705-716 - R. I. Campbell, Massimo Martorelli
Surface roughness visualisation for rapid prototyping models. 717-725 - Stephen P. Radzevich:
Conditions of proper sculptured surface machining. 727-740 - Junghoon Hur, Kunwoo Lee, Zhu-hu, JongWon Kim:
Hybrid rapid prototyping system using machining and deposition. 741-754 - N. Shyamsundar, Rajit Gadh:
Collaborative virtual prototyping of product assemblies over the Internet. 755-768
Volume 34, Number 11, September 2002
- David Podgorelec
A new constructive approach to constraint-based geometric design. 769-785 - Christoph M. Hoffmann, Ching-Shoei Chiang:
Variable-radius circles of cluster merging in geometric constraints: I. Translational clusters. 787-797 - Christoph M. Hoffmann, Ching-Shoei Chiang:
Variable-radius circles in cluster merging: II. Rotational clusters. 799-805 - Les A. Piegl, Wayne Tiller:
Biarc approximation of NURBS curves. 807-814 - Koichi Harada, Takeshi Anzai:
Multiple sweeping using quaternion operations. 815-822 - Charlie C. L. Wang
Surface flattening based on energy model. 823-833 - Younghyun Han, Kunwoo Lee:
Using sign algebra for qualitative spatial reasoning about the configuration of mechanisms. 835-848 - Weidong Li, Soh-Khim Ong
Recognizing manufacturing features from a design-by-feature model. 849-868
Volume 34, Number 12, October 2002
- Imre Horváth, Joris S. M. Vergeest, Anthony J. Medland:
'Computer-based tools and methods of competitive engineering'. 869-870 - Glen Mullineux:
Improvement of free-form surfaces for product styling applications. 871-880 - Bart H. M. Gerritsen, Klaas van der Werff, Remco C. Veltkamp:
Modelling natural objects with -complexes. 881-897 - Alex Noort, Geoffry F. M. Hoek, Willem F. Bronsvoort:
Integrating part and assembly modelling. 899-912 - Johan Jansson, Joris S. M. Vergeest:
A discrete mechanics model for deformable bodies. 913-928 - Eckart Schnack, Wolfgang Weikl:
Shape optimization under fatigue using continuum damage mechanics. 929-938 - Panos Y. Papalambros
The optimization paradigm in engineering design: promises and challenges. 939-951 - Kikuo Fujita:
Product variety optimization under modular architecture. 953-965
Volume 34, Number 13, November 2002
- Qun Lin, Jon G. Rokne:
Approximation by fat arcs and fat biarcs. 969-979 - Lihui Wang
Collaborative conceptual design - state of the art and future trends. 981-996 - Wai Kei Chiu, Sooi-thor Tan:
An automatic method for controlling the centre of gravity of a model. 997-1010 - Attila Csabai, Ian Stroud, Paul C. Xirouchakis:
Container spaces and functional features for top-down 3D layout design. 1011-1035 - Xunnian Yang
Efficient circular arc interpolation based on active tolerance control. 1037-1046 - Adrian Bowyer:
LEDA - a platform for combinatorial and geometric computing Kurt Mehlhorn and Stefan Näher, Cambridge University Press, Cambridge, UK, 1999, 1018 pages, ISBN 0-521-56329-1. 1047-1048 - Allan D. Spence:
Machine design - a classical mechanical engineering textbook: Machine design - A CAD Approach; A.D. Dimarogonas (Ed.); Wiley, New York, 2001, 996 pages, ISBN 0-471-31528-1. 1049-1050 - Cecil G. Armstrong:
A Fine Mesh BookMesh Generation: application to finite elements: Pascal Jean Frey, Paul-Louis George, Hermes Science Europe, Oxford & Paris, 2000, 814 pages, ISBN 1-903398-00-2. 1051
Volume 34, Number 14, December 2002
- Reiner Anderl, Jon Owen:
Editorial. 1053-1054 - Gregory L. Smith:
Utilization of STEP AP 210 at The Boeing Company. 1055-1062 - Franca Giannini
A modelling tool for the management of product data in a co-design environment. 1063-1073 - Türkay Dereli
A note on the use of STEP for interfacing design to process planning. 1075-1085 - Xuan F. Zha, Hejun Du
A PDES/STEP-based model and system for concurrent integrated design and assembly planning. 1087-1110 - Michael J. Pratt, A. D. Bhatt, Debasish Dutta, Kevin W. Lyons, Lalit Patil, Ram D. Sriram:
Progress towards an international standard for data transfer in rapid prototyping and layered manufacturing. 1111-1121
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-27 20:18 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: