default search action
SAS 2016: Catania, Italy
- IEEE Sensors Applications Symposium, SAS 2016, Catania, Italy, April 20-22, 2016. IEEE 2016, ISBN 978-1-4799-7250-0
- Eddy Trinklein, Gordon Parker
:
Ship motion sensor isolation system development and testing for use with low cost IMUs. 1-6 - Francesco Bertocci
Stability evaluation of YCoO3 basedperovskites used for NO2 detection. 1-6 - Jörg Güttler
Contactless fever measurement based on thermal imagery analysis. 1-6 - Mingzhe Jiang
IoT-based remote facial expression monitoring system with sEMG signal. 1-6 - Ahmed Alfadhel, Mohammed Asadullah Khan
A single magnetic nanocomposite cilia force sensor. 1-4 - Jeong Woo Choi, Sung Ho Cho, Young Soo Kim, No Joong Kim, Soon-Sung Kwon, Jae Suk Shim:
A counting sensor for inbound and outbound people using IR-UWB radar sensors. 1-5 - Valentino Meacci, Stefano Ricci
Flow-Viz - An integrated digital in-line fluid characterization system for industrial applications. 1-6 - Seongha Park, Yongho Kim, Eric T. Matson, Anthony H. Smith:
Accessible synthetic aperture radar system for autonomous vehicle sensing. 1-6 - Thomas Guenther, Andreas Kroll:
Automated detection of compressed air leaks using a scanning ultrasonic sensor system. 1-6 - Jan Bauer, Bastian Siegmann, Thomas Jarmer, Nils Aschenbruck:
Smart fLAIr: A smartphone application for fast LAI retrieval using Ambient Light Sensors. 1-6 - Thierry Bore
Dielectric spectroscopy of artificial faeces for smouldering applications. 1-6 - Valerio Freschi, Emanuele Lattanzi
Accelerating distributed averaging in sensor networks: Randomized gossip over virtual coordinates. 1-6 - Michael A. Bucceroni, George D. Lecakes, Mira Lalovic-Hand, Shreekanth Mandayam:
A multi-perspective virtual reality visualization of unmanned aerial systems in the U.S. national airspace. 1-4 - Sergio Saponara
Radar sensor signal acquisition and 3D FFT processing for smart mobility surveillance systems. 1-6 - Virgiliu Fireteanu, Alexandru-Ionel Constantin
Supervision of the rotor bars breakage evolution through the output voltage of coil sensors placed outside induction motors. 1-6 - Filippo Greco
A multidisciplinary strategy for in-situ and remote sensing monitoring of areas affected by pressurized fluids: Application to mud volcanoes: A multidisciplinary environmental monitoring strategy. 1-6 - Pasquale Arpaia
Sensors applications within the research framework of the PACMAN project on metrology for particle accelerators at CERN. 1-6 - Vincent Mosser, Nicolas Matringe:
A spinning current circuit for nanotesla range resolution in Hall measurements. 1-6 - Tommaso Polonelli, Trinh Le Huy, Leonardo Lizzi
A wake-up receiver with ad-hoc antenna co-design for wearable applications. 1-6 - Bruno Andò, Salvatore Baglio
A multisensor approach to perform instrumented postural instability tests for patient with Parkinson disease. 1-5 - Elizabeth Rendon-Morales
Functional characterization of developing heart in embryos using Electric Potential Sensors. 1-6 - Ginu Rajan
Fibre optic acoustic emission measurement technique for crack activity monitoring in civil engineering applications. 1-6 - Khim Chhantyal, Håkon Viumdal, Saba Mylvaganam, Geir Elseth:
Ultrasonic level sensors for flowmetering of non-Newtonian fluids in open Venturi channels: Using data fusion based on Artificial Neural Network and Support Vector Machines. 1-6 - Alfredo D'Elia
A self-powered WSAN for energy efficient heat distribution. 1-6 - Valerio De Santis
Novel sensor concepts for the compliance with the EMF directive 2013/35/EU. 1-4 - Francis Adepoju, Khalil Arshak:
Mathematical process of transforming RF signal to position information for tracking ingestible capsules. 1-6 - Maurizio Rossi
Energy neutral 32-channels embedded readout system for IoT-ready fitness equipments. 1-6 - Ching-Che Chung
An all-digital voltage sensor for static voltage drop measurements. 1-4 - Sagar Jinachandran, Jiangtao Xi
Fibre optic acoustic emission sensor system for hydrogen induced cold crack monitoring in welding applications. 1-6 - K. Cyril Baby, Ubaidul Fikri, Norbert Schwesinger:
Resistive characterization of soft conductive PDMS membranes for sensor applications. 1-6 - Geoffrey Ottoy, Bart Thoen
A low-power MEMS microphone array for wireless acoustic sensors. 1-6 - Mattia Butta
Towards digital fundamental mode orthogonal fluxgate. 1-5 - Emanuele Viviani, Daniele Salvalaggio, Cristina Bertoni, Antonio Boscolo:
Milk quality analysis based on a novel ultrasound spectroscopy method. 1-5 - Sangchai Monkronthong, Neil M. White, Nick R. Harris:
A study of efficient speaklet driving mechanisms for use in a digital loudspeaker array based on PZT actuators. 1-5 - Tommaso Addabbo, Ada Fort, Marco Mugnaini, Enza Panzardi
Multisensor electrostatic detection of moving charged particles. 1-6 - Krongboon Singhanat, Nick R. Harris
Experimental validation of opportunistic direct interconnection between different Wireless Sensor Networks. 1-6 - Brendan Taylor, Gourab Sen Gupta
Flexible architecture to automate farm machinery operation: Preliminary results. 1-5 - Ramona Voichita Galatus, Emil Voiculescu, Nunzio Cennamo
Augmented workplace for SPR sensor application. 1-4 - Davide Sartori, Davide Brunelli
A smart sensor for precision agriculture powered by microbial fuel cells. 1-6 - Jaroslaw Francik, Vesna Brujic-Okretic, Mirko Menegazzo, Adrian Godwin, Krzysztof Zienowicz:
Real-time sensor data integration in vertical transport systems: Are conventional mobile devices capable of coping with industrial measurement? 1-6 - Loredana Cristaldi, Marco Faifer
A cooperative monitoring and diagnostic architecture for PV systems. 1-6 - Nunzio Cennamo
Surface plasmon resonance in a D-shaped plastic optical fibre: Influence of gold layer thickness in monitoring molecularly imprinted polymers. 1-5 - Ebrahim Oromiehie
Optical fiber Bragg grating sensors for process monitoring in advanced composites. 1-5 - Gabriele Ligorio, Angelo M. Sabatini:
A particle filter for 2D indoor localization relying on magnetic disturbances and magnetic-inertial measurement units. 1-6 - Michele Crabolu
Evaluation of the accuracy in the determination of the center of rotation by magneto-inertial sensors. 1-5 - Rahul Sukthankar, Michele Covell, Shumeet Baluja:
Physical and virtual cell phone sensors for traffic control: Algorithms and deployment impact. 1-6 - Luca Ferraris
Hybrid magnetic composite (HMC) materials for sensor applications. 1-6 - Maddalena Ferrario, M. Mattarei, Pierpaolo Boffi, Mario Martinelli:
A software-defined coherent fiber optic sensor for manufacturing machine diagnostic. 1-5 - K. Cyril Baby, Sithu Aung, Norbert Schwesinger:
Finite element analysis of differential capacitive PUF sensors. 1-6 - Nissem Selmene, Sylvain Blayac, Muriel Muller, Ghalid I. Abib:
Innovative large area touch sensor: Design and tests of a compact acquisition system. 1-6 - Rohit Gupta, Vijayakumar Sreenath, Boby George
A modified RDC with an auto-adjustable SC source enabled auto-calibration scheme. 1-6 - Bruno Augusti Mozzaquatro, Ricardo Jardim-Gonçalves
The application of security adaptive framework for sensor in industrial systems. 1-6 - Aditya Gaur, Bryan W. Scotney, Gerard Parr, Sally I. McClean:
COSA: An approach to classifying uncertainty in an ontology tree for sensor data Fusion. 1-6 - Duke Danielle Delos Santos, Alron Jan Lam, Jules Macatangay, Ivan Paner, Courtney Anne Ngo:
Breadcrumb: An indoor simultaneous localization and mapping system for mobile devices. 1-6 - Eman A. Soliman
Noise study of open-loop direct current-current transformer using magneto-resistance sensors. 1-5 - Stephan Mühlbacher-Karrer, Lisa-Marie Faller
A wireless steering wheel gripping sensor for hands on/off detection. 1-5 - Stefano Rinaldi
Integrating remote sensors in a smartphone: The project "sensors for ANDROID in embedded systems". 1-6 - Markus Eider, Stefan Kunze, Rainer Poeschl:
FPGA based emulation of multiple 1-wire sensors for hardware in the loop tests. 1-6 - Xiaodong Zhao, Zheng Qian, Yuan Tian, Jingyi Wang, Hao Yu:
The error compensation for static hysteresis characteristics of Giant Magneto-Resistance sensor. 1-5 - Luca Lombardo, Silvia Generelli
A compact electronic interface for electrochemical sensors. 1-4 - Lorenzo Palma
IPv6 WSN solution for integration and interoperation between smart home and AAL systems. 1-5 - Johan Vogel, Stoyan N. Nihtianov:
Modelling the inductance of a novel eddy-current position sensor for high-precision applications. 1-6 - Leonardo Ascorti, Stefano Savazzi
A wireless cloud network platform for critical data publishing in industrial process automation. 1-6 - Tajudeen Olawale Olasupo, Carlos E. Otero
Automatic detection of radio signal obstruction in wireless sensor networks' on-demand deployment. 1-6 - Mohammed Faeik Ruzaij
Auto calibrated head orientation controller for robotic-wheelchair using MEMS sensors and embedded technologies. 1-6 - Carlo Trigona, Bruno Andò, Salvatore Baglio
Vibration-based transducer for zero-energy standby applications. 1-4 - Claudio Crema
Efficient R-peak detection algorithm for real-time analysis of ECG in portable devices. 1-6 - Filippo Pietroni, Sara Casaccia, Gian Marco Revel, Lorenzo Scalise:
Methodologies for continuous activity classification of user through wearable devices: Feasibility and preliminary investigation. 1-6 - Davorin Ambrus, Darko Vasic
Estimating directional magnetic polarizabilities of metallic objects using planar time-domain electromagnetic induction sensor. 1-5 - Principia Dardano
Glucose sensing electrode system based on polymeric microneedles. 1-5 - Mohammed Asadullah Khan
Fabrication and characterization of magnetic composite membrane pressure sensor. 1-5 - Khim Chhantyal, Håkon Viumdal, Saba Mylvaganam, Geir Elseth:
Estimating viscosity of non-Newtonian fluids using support vector regression method: Rheological parameters of drilling fluids using data fusion. 1-6 - Bruno Andò, Salvatore Baglio
A low threshold bistable device for energy scavenging from vibrations. 1-5 - Stefano Bertuletti, Andrea Cereatti, Ugo Della Della, Michele Caldara, Michael Galizzi:
Indoor distance estimated from Bluetooth Low Energy signal strength: Comparison of regression models. 1-5 - Amandine Bocheux, Claude Cavoit, Myckael Mouchel, Clarisse Ducruet, Romain Fons, Philippe Sabon
High sensitivity magnetic field sensor for spatial applications. 1-5 - Alexander J. H. Ross, Ryan H. Griffin
Radon monitor using alpha-detecting CMOS IC. 1-5 - Kishore Bhowmik, Eliathamby Ambikairajah
High-sensitivity polymer fibre Bragg grating sensor for biomedical applications. 1-5 - Michael D. O'Toole
Evaluation of the thin-skin approximation boundary element method for electromagnetic induction scattering problems. 1-6 - Nazir Kamaldin, Kok Kiong Tan, Wenyu Liang
Application of capacitive-based contact sensing for a new medical instrument. 1-6 - Ada Fort, Marco Mugnaini, Marco Tani
Detection of allergen-IgE interaction in allergic children through impedance measurements. 1-6 - Jun Su, Nataliya Roshchupkina, Volodymyr Kochan
Methods for improving the accuracy of sensors with a significant influence of non-informative factors. 1-6 - Alexandra Iosub, Jérôme Kirscher, Monica Rafaila, Andi Buzo, Georg Pelz, Liviu Goras
Simulation-based approach to application fitness for an E-Bike. 1-6 - Ronan Adam, Emmanuel Pecheur, Loïc Bernard, Sébastien Changey:
In-flight roll angle estimation for a guided high spin projectile. 1-6 - Maik Rosenberger, Chen Zhang, Mike Bartmus, Gunther Notni:
Imaging sensor and imaging algorithms for quality inspection of flexible materials. 1-6 - Asem Khattab, Sharief Saleh
A precise converter for resolvers and sinusoidal encoders based on a novel ratiometric technique. 1-6 - Anett Bailleu:
Ultrasonic transducer positioning system for clamp-on flowmeter applications. 1-6 - Joao Azevedo, Sérgio Crisóstomo
Weather stations-assisted barometric altimeter for Android: Interpolation techniques for improved accuracy. 1-6 - Vojtech Petrucha:
Low-cost dual-axes fluxgate sensor with a flat field-annealed magnetic core. 1-4 - Michele Bona
Study on a telemetrie system that works with an inkjet-printed resistive strain gauge. 1-6 - Elisa Pievanelli, Riccardo Stefanelli, Daniele Trinchero:
Microwave-based leaf wetness detection in agricultural wireless sensor networks. 1-4 - Chih-Chyau Yang, Ssu-Ying Chen, Yi-Jie Hsieh, Fu-Chen Cheng, Yu-Cheng Huang, Jin-Ju Chue, Chih-Ting Kuo, Chien-Ming Wu, Chun-Ming Huang:
A rugged sensor system for real-time bridge safety monitoring in Taiwan. 1-5 - Giuseppe Ferri, Francesca Romana Parente
Analog current-mode interfaces for differential capacitance sensing. 1-6 - Sergio Saponara
Performance measurements of energy storage systems and control strategies in real-world e-bikes. 1-6 - Nick R. Harris, Dinesh Sthapit:
Towards a personalised rehabilitation system for post stroke treatment. 1-5 - Zlatica Marinkovic
A neural network approach for safety monitoring applications. 1-5
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-09-29 23:56 CEST by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: