default search action
IAS Annual Meeting 2016: Portland, OR, USA
- 2016 IEEE Industry Applications Society Annual Meeting, Portland, OR, USA, October 2-6, 2016. IEEE 2016, ISBN 978-1-4799-8397-1
- Yuan-Kang Wu, Jhih-Hao Lin, Huei-Jeng Lin:
Standards and guidelines for grid-connected photovoltaic generation systems: A review and comparison. 1-8 - Chia-An Chang, Ting-Chun Lo, Yuan-Kang Wu, Bin-Kwien Chen:
Simplified frequency estimation for unit scheduling criteria with high wind penetration. 1-8 - Aoxia Chen, Pankaj Kumar Sen:
Advancement in battery technology: A state-of-the-art review. 1-10 - Tianguang Lv
, Zhaoyu Wang, Qian Ai, Wei-Jen Lee:
Interactive model for energy management of clustered microgrids. 1-8 - Beata Polgari, Daniel Divényi
Control response analysis of aggregated energy storage household appliances. 1-9 - Yanzhu Ye, Ratnesh Sharma, Feng Guo:
A multi-layer optimal chiller operation management framework. 1-6 - Nishad Mendis, Md. Apel Mahmud
Power management and control strategies for efficient operation of a solar power dominated hybrid DC microgrid for remote power applications. 1-8 - Lourdes Álvarez Barcia, Fernando Nuño
Optimized control of the Solar Field in parabolic trough solar power plants. 1-6 - Chun-Lien Su, Chi-Hsiang Liao, Tso-Chu Chou, Min-Hung Chou, Josep M. Guerrero
Variable flow controls of closed system pumps for energy savings in maritime power systems. 1-8 - Samer Sulaeman, Yuting Tian, Mohammed Benidris
Quantification of storage necessary to firm up wind generation. 1-7 - Kaveh Sarrafan, Kashem M. Muttaqi, Danny Sutanto
An intelligent driver alerting system for real-time range indicator embedded in electric vehicles. 1-7 - Eddison Hernandez, Enrique Vera, Paul Vasquez
Mid-term load forecasting - application in oil facilities. 1-6 - Ying-Chun Chuang, Hung-Shiang Chuang, Jyun-Han Wu:
A sinusoidal charging strategy for battery energy storage systems use in light electric vehicles. 1-9 - Rahul Kumar Agarwal, Ikhlaq Hussain
Improved power quality of three-phase grid connected Solar Energy Conversion System under grid voltages distortion and imbalances. 1-8 - Andreas Giannakis
A study on the dynamic behavior of a DFIG with sensorless-based control in cooperation with a fuzzy controlled energy storage system. 1-8 - Konstantinos Kafalis, Athanasios D. Karlis
Comparison of flywheels and supercapacitors for energy saving in elevators. 1-8 - Dongdong Ye, Dinghao Sun, Wei-Jen Lee, Heng Huang, Yang Zhang:
Performance evaluation of two magnetic recovery circuits of forward converter. 1-6 - Hussein M. K. Al-Masri, Mark Ehsani:
Accurate wind turbine annual energy computation by advanced modeling. 1-6 - Hussein M. K. Al-Masri, Mark Ehsani:
Impact of wind turbine modeling on a hybrid renewable energy system. 1-8 - Miguel J. Prieto
Optimizing the control strategy of molten-salt heat storage systems in thermal solar power plants. 1-6 - Jae Ik Yoo, Jaewoo Kim, Jung-Wook Park
Converter control of PMSG wind turbine system for inertia-free stand-alone microgrid. 1-8 - Luigi Martirano
Smart micro grids for Nearly Zero Energy Buildings. 1-8 - Nelson Fabian Avila, Chia-Chi Chu
Distributed pinning droop control in isolated AC microgrids. 1-8 - Mohanraj Bellie Subramani, Srinivas Gude, Kuan-Chu Lin, Chia-Chi Chu
An efficient method for small-signal stability assessment of P - ƒ/Q - V̇ droop control in an isolated micro-grid. 1-8 - Farnaz Harirchi, Marcelo Godoy Simões, Mohammad Babakmehr, Ahmed Al-Durra
Multi-functional double mode inverter for power quality enhancement in smart-grid applications. 1-8 - Miloud Rezkallah, Shailendra Sharma
Implementation and control of small-scale hybrid standalone power generation system employing wind and solar energy. 1-7 - Hamed Mortaji, Siew Hock Ow, Mahmoud Moghavvemi
Smart grid demand response management using internet of things for load shedding and smart-direct load control. 1-7 - Saleh A. Saleh:
Resolution-level MPPT controller for PMG-based wind energy conversion systems. 1-15 - Yen-Chia Chu, Dariusz Czarkowski, Jialin Zou, H. Jonathan Chao, Le-Ren Chang-Chien, Chih-Hsiang Chang, N. Sertac Artan:
On-chip AC-DC multiple-power-supplies module for transcutaneously powered wearable medical devices. 1-10 - Lin-Yu Lu, Chia-Chi Chu
Model reference adaptive back-EMF estimations for sensorless control of grid-connected doubly-fed induction generators. 1-8 - S. F. Rabbi, Maxwell L. Little, M. Azizur Rahman:
A novel technique for detection and analysis of hunting in line-start IPM motors using stator current signature. 1-8 - Ram Niwas, Bhim Singh
Unity power factor operation and load leveling of diesel generator set using battery energy storage system. 1-6 - Md. Mizanur Rahman, M. Nasir Uddin:
A novel DTFC based IPMSM drive with improved efficiency and dynamic performance. 1-8 - Suvendu Samanta, Akshay Kumar Rathore:
Bidirectional wireless power transfer topology using current-fed half bridge CLC transmitter LC receiver configuration for medium power applications. 1-8 - Xinze Xi, Hua Geng, Geng Yang:
Two-level damping control for DFIG-based wind farm providing synthetic inertial service. 1-6 - Xinze Xi, Hua Geng, Geng Yang:
Torsional oscillation damping control for DFIG-based wind farm participating in power system frequency regulation. 1-5 - M. A. Hannan
Lithium-ion battery charge equalization algorithm for electric vehicle applications. 1-8 - Ahmad H. El Khateb
A comparative study on D converter based on control schemes of maximum extracted power. 1-7 - Anjanee Kumar Mishra
A single stage solar PV array based water pumping system using SRM drive. 1-8 - Longfei Wei, Arif I. Sarwat
Risk assessment of coordinated cyber-physical attacks against power grids: A stochastic game approach. 1-7 - Rajasekhara Reddy Chilipi
adaptive notch filter based multipurpose control scheme for grid-interfaced three-phase four-wire DG inverter. 1-8 - Ahmed T. Elsayed, Noureldeen Elsayad, Osama A. Mohammed
Pareto based optimal sizing and energy storage mix in ship power systems. 1-6 - Ahmed A. S. Mohamed
Steady-state performance assessment of different compensation topologies in two-way IWPT system for EV ancillary services. 1-8 - Masood Moghaddami
Pareto optimization of circular power pads for contactless electric vehicle battery charger. 1-6 - Jingjing Cui, Yi Ren
Reliability analysis of a novel design of pose deformation system for mobile robots through Bond Graph and Simulink. 1-9 - Ali Mortezaei, Marcelo Godoy Simões, Tiago Davi Curi Busarello
A symmetrical Cascaded H-bridge Multilevel Inverter used as shunt active power filter for ideal and deteriorated voltage conditions. 1-8 - Wenchao Xue, Rafal Madonski
Add-on module of Active Disturbance Rejection for set-point tracking of motion control systems. 1-9 - Zhenyao Xu, Myeong-Ji Kim, Dong-Hee Lee, Jin-Woo Ahn:
Characteristics analysis and comparison of conventional and segmental rotor type 12/8 switched reluctance motors. 1-7 - Mina A. S. Aziz, M. Zhanibek, Ali S. A. Elsayed, Mostafa Osama Mostafa Abdulrazic, Samer Yahya, Haider A. F. Almurib
Design and analysis of a proposed light weight three DOF planar industrial manipulator. 1-7 - Swati Narula, Bhim Singh
Power quality improved SMPS using BL-CSC converter for welding applications. 1-8 - Sachin Devassy, Bhim Singh
Modified p-q theory based control of solar PV integrated UPQC-S. 1-8 - Marco Roetzer, Ulrich Vollmer, Ralph Kennel:
Demodulation approach for slowly sampled sensorless field-oriented control systems enabling multiple-frequency injections. 1-9 - Ray-Lee Lin, Lung-Hua Huang:
Efficiency improvement on LLC resonant converter using integrated LCLC resonant transformer. 1-8 - Daming Zhou
Degradation prediction of PEM fuel cell stack based on multi-physical aging model with particle filter approach. 1-8 - Sharif Bhuiyan, Jesmin Khan, Gregory Murphy:
Wavelet packet decomposition for power quality monitoring in smart grid. 1-8 - Lokman H. Hassan
Damping of low-frequency oscillations using Takagi-Sugeno Fuzzy stabilizer in real-time. 1-7 - Alberto Berzoy, A. A. S. Mohamed
Inter-turn short-circuit fault model for magnetically coupled circuits: A general study. 1-7 - Qicheng Huang, Kaushik Rajashekara:
An improved delayed signal cancellation PLL for fast grid synchronization under distorted and unbalanced grid condition. 1-7 - Amir Hasan Moghadasi, Arman Sargolzaei
Model predictive power control approach for three-phase single-stage grid-tied PV module-integrated converter. 1-6 - Fayez F. M. El-Sousy, Khaled Ali Abuhasel:
Adaptive nonlinear disturbance observer using double loop self-organizing recurrent wavelet-neural-network for two-axis motion control system. 1-14 - Mahmoud Saleh
Design and implementation of CCNY DC microgrid testbed. 1-7 - HyoJong Lee, Shwetha Niddodi, Anurag Srivastava, David E. Bakken:
Decentralized voltage stability monitoring and control in the smart grid using distributed computing architecture. 1-9 - Ritwik Chattopadhyay, Subhashish Bhattacharya
Decoupled power flow using phase shift control and ZVS cases for a three limb high frequency transformer based three-port DAB integrating PV and energy storage. 1-8 - Anirban Ghoshal, Akshay K. Rathore, Xuewei Pan:
Analysis, design, and implementation of closed loop control of electrolytic capacitor-less six-pulse DC link inverter. 1-7 - Govind Chavan
A novel control algorithm for a static series synchronous compensator using a Cascaded H-bridge converter. 1-6 - Tushar Kanti Roy
Nonlinear adaptive backstepping controller design for controlling bidirectional power flow of BESSs in DC microgrids. 1-8 - Ren Liu, Anurag Srivastava, Alexander Askerman, David E. Bakken, Patrick Panciatici:
Decentralized state estimation and remedial control action for minimum wind curtailment using distributed computing platform. 1-9 - Ankita Dwivedi, Santosh Kumar Singh
Analysis and performance evaluation of axial flux permanent magnet motors. 1-7 - Mohammad Babakmehr, Farnaz Harirchi, A. Alsaleem, Abdullah Saad Bubshait, Marcelo Godoy Simões:
Designing an intelligent low power residential PV-based Microgrid. 1-8 - Nimish Soni, Suryanarayana Doolla, Mukul C. Chandorkar:
Analysis of frequency transients in isolated microgrids. 1-9 - Robert A. Sowah
Design and implementation of a fire detection and control system for automobiles using fuzzy logic. 1-8 - Nanfang Yang, Babak Nahid-Mobarakeh
Multiple-vector-based predictive direct current control for a wound rotor synchronous machine drive. 1-9 - Yigeng Huangfu, Shengrong Zhuo, Fuxi Chen, Shengzhao Pang:
Evaluation and fault tolerant control of a floating interleaved boost converter for fuel cell systems. 1-7 - Phatiphat Thounthong
Differential flatness based speed/torque control with state-observers of permanent magnet synchronous motor drives. 1-8 - Thibaud Plazenet, Thierry Boileau
An overview of shaft voltages and bearing currents in rotating machines. 1-8 - Abilash Thakallapelli
Real-time reduced order model based adaptive pitch controller for grid connected wind turbines. 1-8 - T. Paul, Sudipta Ghosh
A quadratic programming based optimal power and battery dispatch for grid connected microgrid. 1-8 - K. Gnana Sambandam, Akshay K. Rathore, Amarendra Edpuganti
Current-fed multilevel converters: An overview of circuit topologies and modulation techniques. 1-10 - Rojan Bhattarai, Niroj Gurung
Reduced order state observer based feedback control methodologies for doubly fed induction generator (DFIG). 1-8 - J. Marcos Alonso, Marina S. Perdigão
Analysis and design of a novel variable-inductor-based LED driver for DC lighting grids. 1-8 - Fang Lei, Pascal Dupuis
Acoustic resonance detection using statistical methods of voltage envelope characterization in metal halide lamps. 1-7 - Ray-Lee Lin, Chia-Hao Tsai, Nian-Ci Chen:
Design and implementation of ferroresonant transformer for LED driver systems. 1-9 - Renan R. Duarte, Guilherme F. Ferreira, Marco A. Dalla Costa
Performance comparison of Si and GaN transistors in a family of synchronous buck converters for LED lighting applications. 1-7 - Pascal Dupuis
Performance changes of energy saving lamps under lumen maintenance and switching stress test. 1-8 - Aman Jha
Zeta converter for power quality improvement for multi-string LED driver. 1-8 - J. Marcos Alonso, Marina S. Perdigão
SPICE-aided design of a variable inductor in LED driver applications. 1-8 - Leandro Chies
Design space for LED systems considering photoelectrothermal aspects. 1-8 - Vitor Cristiano Bender, Fernanda B. Mendes, Norton D. Barth, Rafael A. Pinto, Tiago B. Marchesan
Experimental evaluation of current waveform on OLED photometric performance. 1-8 - Zivion O. Silalahi, Pascal Dupuis
Ageing characterization of colorimetric and photometric properties of commercial LED lamps. 1-9 - Jeremy Dulout, Angel Barroso, Lionel Seguier, Bruno Jammes, Pascal Dupuis
Multi-objective methodology to find the optimal forward current to supply light emitting diode (LED) lightings. 1-7 - Guirguis Z. Abdelmessih
A new active Hybrid-Series-Parallel PWM dimming scheme for off-line integrated LED drivers with high efficiency and fast dynamics. 1-8 - Mitsuru Nakata, Yoshiki Nakajima, Hiroshi Tsuji, Tatsuya Takei, Yoshihide Fujisaki, Toshihiro Yamamoto:
High Performance oxide thin-film transistor for large-screen, high-resolution organic light-emitting diode display. 1-5 - Hiroshi Unno, Kazutake Uehira:
Display technique for embedding information in real object images using temporally and spatially luminance-modulated light. 1-5 - E. A. Cano-Plata
Validation and reception of electric arc furnace transformers. 1-6 - Igor A. Pires, Alysson A. P. Machado, Marcelo Murta, Braz de Jesus Cardoso Filho:
Experimental results of a Thyristor Switched Series Reactor for Electric Arc Furnaces. 1-5 - Yunus Emre Vatankulu, Zekeriya Senturk, Özgül Salor:
Harmonics and interharmonics analysis of electrical arc furnaces based on spectral model optimization with high resolution windowing. 1-8 - Mehmet Turkuzan, Özgül Salor:
Illumination based flickermeter designed for flicker analysis of electric arc furnace plants. 1-8 - Sam Morello, Thomas J. Dionise:
Sizing reactive compensation for a steel plant to support a new descaler with large motors. 1-8 - Gonzalo Alonso Orcajo
Overcurrent Protection Response of a Hot Rolling Mill Filtering System: Analysis of the Process Conditions. 1-10 - Katharina Prinz, Andreas Steinboeck
Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward. 1-8 - John Pittner, Marwan A. Simaan
Use of advanced control with virtual rolling to improve the control of the threading of the tandem hot metal strip mill. 1-8 - Cheng-Tsung Liu, He-Yu Chung, Sheng-Yang Lin:
On the electromagnetic steel selections and performance impact assessments of synchronous reluctance motors. 1-9 - Haisen Zhao, Dongdong Zhang, Yilong Wang, Yang Zhan, Guorui Xu:
Piecewise variable parameter loss model of laminated steel and its application in fine analysis of iron loss of inverter-fed induction motors. 1-8 - Pedro Manso, Daniel F. García, Rubén Usamentiaga:
Rail flatness measurement method based on virtual rules. 1-8 - Stephan Strommer, Martin Niederer
Nonlinear observer for temperatures and emissivities in a strip annealing furnace. 1-8 - Rubén Usamentiaga, Daniel F. García:
Enhanced temperature monitoring system for sinter in a rotatory cooler. 1-9 - Juan M. Lopera, Hector del Arco Rodriguez, Jesus Maria Perez Pereira, Alejandro Rodriguez de Castro, Jose Luis Rendueles Vigil:
Wireless sensors supplied by energy harvesting thermoelectric generators. 1-8 - Quoc Dung Phan, Anh Tuan Vo
Several configurations and resonant control for multiphase induction heating systems. 1-10 - Dmitry Semenov, Bing Tian, Li Sun, Galina Mirzaeva
Advanced fault-tolerant current control of five-phase PMSM for mining applications. 1-7 - Victor N. Ferreira, Gabriel A. Mendonca
Medium voltage IGBT-based converters in mine hoist systems. 1-8 - P. Pablo Castro, M. Anibal Valenzuela:
Locked charge protection algorithms robust to coordination with overcurrent protection in ball and sag mill drives. 1-9 - Mohsen Ghaffarpour Jahromi, Galina Mirzaeva
Design of a high power low losses DC-DC converter for mining applications. 1-8 - Chuck Collins, Lawrence B. Farr, David B. Durocher:
Process modernization upgrade: Selecting and installing a new medium-voltage motor control center. 1-9 - S. Mohsen Azizi, Ebrahim Tarshizi:
Autonomous control and navigation of a lab-scale underground mining haul truck using LiDAR sensor and triangulation - feasibility study. 1-6 - Pablo Aqueveque
Temperature monitoring of electrolytic cells using wireless battery-free harsh environment sensors. 1-8 - Javier Valenzuela Cruzat, M. Anibal Valenzuela:
Integrated modeling and evaluation of electric mining trucks during propel and retarding modes. 1-10 - Eduardo P. Wiechmann
An intercell busbar topology to improve resilience to anomalies of copper electrorefining process. 1-6 - Thiago Morais Parreiras, Brenno Marcus Prado, Braz de Jesus Cardoso Filho:
Common-mode overvoltage mitigation in a medium voltage pump motor transformerless drive in a mining plant. 1-9 - Mohsen Ghaffarpour Jahromi, Galina Mirzaeva
Control strategy for a high power DC transformer with soft switching scheme for mining applications. 1-8 - Francisco Silva, Luis Morán
A method to evaluate cycloconverters commutation robustness under voltage variations in mining distribution systems. 1-8 - Nicholas W. Damiano, Lincan Yan, Bruce G. Whisner, Chenming Zhou:
Simulation and measurement of through-the-earth (TTE), extremely low-frequency signals using copper-clad, steel ground rods. 1-8 - Khalid Saad, Galina Mirzaeva
Advanced diagnosis of stator faults in large induction motors based on internal flux measurement. 1-6 - David B. Durocher, Mike Lane:
An overview of remote isolation systems applied in process industries. 1-5 - V. Richard Cartes, M. Anibal Valenzuela:
Empirical determination of the effect of lifter wear in mill power for dry grinding. 1-7 - Pablo Aqueveque
Monitoring physiological variables of mining workers at high altitude. 1-6 - Khalid Saad, Galina Mirzaeva
Advanced diagnosis of rotor faults in large induction motors based on internal flux measurement. 1-8 - Lincan Yan, Chenming Zhou, Miguel A. Reyes, Bruce G. Whisner, Nicholas W. Damiano:
E-fields of electrode-based through-the-earth (TTE) communication. 1-8 - Eduardo P. Wiechmann
Equipotential bars with replaceable connectors for copper electrowinning. 1-5 - Giuseppe Parise
High voltage shore connections (HVSC), an IEC/ISO/IEEE 80005-1 compliant solution: The neutral grounding system. 1-6 - Chun-Lien Su, Jhih-Liang Chen, Hai-Ming Chin, Chi-Hsiang Liao, Giuseppe Parise
Short-circuit current calculations of a harbor electrical distribution system with shore power connection. 1-9 - Chun-Lien Su, Yung-Chi Lee, Min-Hung Chou, Hai-Ming Chin, Giuseppe Parise
Evaluation of voltage drop in harbor electrical distribution systems with high voltage shore connection. 1-8 - Giuseppe Parise
Comprehensive peak-shaving solutions for port cranes. 1-7 - Carson Bates
How to include soil thermal instability in underground cable ampacity calculations. 1-8 - Giuseppe Parise
Tests and monitoring of grounding systems in HV/MV substations. 1-6 - Santiago Arias Guzman, A. J. Ustariz-Farfan
Segmentation and characterization of voltage sags in the analysis of industrial circuits. 1-8 - Chengfu Wang, Zhe Li, Jun Liang, Jinyu Wang, Ming Yang, Xiaoming Dong:
A dynamic equivalent method of wind farm considering wind farm dispersity and wind turbine difference. 1-6 - Jesse Leonard, Thomas E. Salem, Ramtin Hadidi, Benjamin Gislason, J. Curtiss Fox, Mark H. McKinney:
Design and commissioning of 2.5 MW DC supply for evaluating megawatt scale smart solar inverters. 1-5 - Saleh A. Saleh:
The development of a power flow-based controller for micro-grid systems. 1-11 - S. Mohsen Azizi, Sayed Ali Khajehoddin
An optimization approach to design decentralized load frequency controllers for generators in islanded microgrids. 1-7 - Ajit A. Renjit, Abrez Mondal, Mahesh S. Illindala, Amrit S. Khalsa:
Analytical methods for characterizing frequency dynamics in islanded microgrids with gensets and energy storage. 1-8 - Rabindra Maharjan
Control strategy for islanded microgrid integrating renewable energy with storage and diesel generator. 1-7 - C. C. Yeh, Chao Shun Chen, T. T. Ku, C. H. Lin, Cheng Ting Hsu, Hui-Jen Chuang:
Mitigation of voltage variation by REMS for distribution feeders. 1-7 - Farshid Salehi, Azade Brahman, Reza Keypour
Reliability assessment of automated substation and functional integration. 1-7 - Farzaneh Pourahmadi, Mahmud Fotuhi-Firuzabad, Payman Dehghanian:
Identification of critical components in power systems: A game theory application. 1-6 - Fabio Freschi
Electrical safety in arc welding processes. 1-8 - Dennis K. Neitzel:
Electrical safety inspections in industrial facilities. 1-4 - Aldo Canova, Fabio Freschi
Assessment of the occupational exposure to the magnetic field produced by spot welding guns in controlled environment and actual working conditions. 1-7 - Ehab Shoubaki, Mahmoodreza Arefi, Manohar Chamana
Time base synchronization for interconnecting Real-Time platforms in co-simulation. 1-4 - Li Wang
Stability improvement of a two-area power system connected with an integrated onshore and offshore wind farm using a STATCOM. 1-9 - Li Wang, Zhi-Hao Yang, Anton V. Prokhorov:
Stability analysis of a hybrid multi-infeed HVDC system connected between two offshore wind farms and two power grids. 1-9 - Alysson A. P. Machado, Helio M. A. Antunes
Probabilistic assessment and evaluation of transients in a medium voltage three-phase capacitor bank energized by unsynchronized vacuum switchgears. 1-11 - Xiaodong Liang
Factors affecting ground potential rise and fault currents along transmission lines with multi-grounded shield wires. 1-12 - Xiaodong Liang
Rule-based data-driven analytics for Wide-Area fault detection using synchrophasor data. 1-9 - Xiaohang Jin, Fangzhou Cheng, Yayu Peng
A comparative study on Vibration- and current-based approaches for drivetrain gearbox fault diagnosis. 1-8 - Fangzhou Cheng, Yayu Peng
Current-based fault detection and identification for wind turbine drivetrain gearboxes. 1-9 - Vincenzo Cirimele
Inductive power transfer for automotive applications: State-of-the-art and future trends. 1-8 - Joydeep Mitra
A visualization tool for real-time dynamic contingency screening and remedial actions. 1-9 - Jinyu Wang, Jun Liang, Chengfu Wang, Xiaoming Dong:
Circulating current suppression for MMC-HVDC under unbalanced grid conditions. 1-9 - Zhijie Liu, Ke-Jun Li, Xin-han Meng, Wei-Jen Lee, Zhuo-di Wang, Kaiqi Sun
Dynamic simulator for multi-terminal direct current transmission system. 1-9 - Saleh A. Saleh, P. Pijnenburg, Eduardo Castillo Guerra:
Load aggregation from generation-follows-load to load-follows-generation. 1-8 - Xiaoming Dong, Yuanyuan Ding, Penghui Zhao, Chengfu Wang, Yong Wang, Hua Sun:
Power flow calculation considering power exchange control for multi-area interconnection power networks. 1-7 - Xiaoyan Yu, Ke-Jun Li, Mingqiang Wang, Zhuo-di Wang, Kaiqi Sun
A multi-step dynamic equivalent method for urban power grid based on district-dividing. 1-8 - Xiaodong Liang
Emerging power quality challenges due to integration of renewable energy sources. 1-9 - Fabio Freschi, Massimo Mitolo
Currents flowing through the human body: The numerical viewpoint. 1-7 - Hany F. Habib, Tarek Youssef
A multi-agent based technique for fault location, isolation and service restoration. 1-8 - Xianyong Feng, Li Qi
A novel fault location method and algorithm for DC distribution protection. 1-5 - Saleh A. Saleh, Ryan Meng, R. McSheffery, S. Buck, Emre Ozkop
A new interconnection protection for co-generation systems. 1-16 - Jin-Shyr Yang, Ching-Jung Liao, Yung-Fu Wang, Chia-Chi Chu
Design and deployment of special protection system for Kinmen power system. 1-6 - Shu Zhang, Zhengyou He, Wei-Jen Lee, Ruikun Mai:
Voltage sag profiles based fault location in high speed railway distribution system. 1-9 - Hongying He, Wei-Jen Lee, Yijia Cao, Diansheng Luo:
Insulator infrared image denoising method based on wavelet generic Gaussian distribution and MAP estimation. 1-6 - David Celeita
Virtual relay design for feeder protection testing with online simulation. 1-7
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-02-21 19:21 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: