|
1.
|
Superconducting magnets technology for a European heavy ion gantry
/ Prioli, Marco (LASA, Segrate) ; Santini, Carlo (LASA, Segrate) ; Barna, Daniel (Wigner RCP, Budapest) ; Gusvitskii, Todor (Rome U.) ; Perini, Diego (CERN) ; Bianchi, E (INFN, Genoa) ; Felcini, Enrico (CNAO, Milan) ; De Matteis, Ernesto (LASA, Segrate) ; Toral, Fernando (Madrid, CIEMAT) ; Levi, Filippo (INFN, Genoa) et al.
Various initiatives in Europe have been launched to study superconducting magnets for a rotatable gantry suitable to deliver up to 430 MeV/u carbon ions for hadron therapy. Different technologies and layouts are being considered: the baseline solution is developed within the EuroSIG collaboration and consists of a strongly curved cos-$\theta$ dipole based on the classical NbTi superconductor. [...]
2024 - 5 p.
- Published in : JACoW IPAC 2024 (2024) WEXN1
Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.WEXN1
|
|
|
2.
|
Mechanical stress analysis during a quench in CLIQ protected 16 T dipole magnets designed for the future circular collider
/ Zhao, Junjie (Lanzhou U.) ; Prioli, Marco (CERN) ; Stenvall, Antti (Tampere U. of Tech.) ; Salmi, Tiina (Tampere U. of Tech.) ; Gao, Yuanwen (Lanzhou U.) ; Caiffi, Barbara (INFN, Genoa) ; Lorin, Clement (Saclay) ; Marinozzi, Vittorio (Milan Bicocca U. ; INFN, Milan) ; Farinon, Stefania (INFN, Genoa) ; Sorbi, Massimo (Milan Bicocca U. ; INFN, Milan)
Protecting the magnets in case of a quench is a challenge for the 16 T superconducting dipole magnets presently designed for the 100 TeV: Future Circular Collider (FCC). These magnets are driven to the foreseen technological limits in terms of critical current, mechanical strength and quench protection. [...]
2018 - 8 p.
- Published in : Physica C 550 (2018) 27-34
|
|
|
3.
|
A Translating-Coil Magnetometer for the Magnetic Measurements of the HL-LHC High-Order Corrector Magnets at Room Temperature
/ Pentella, Mariano (CERN) ; Dalane, Eivind (CERN) ; De Matteis, Ernesto (LASA, Segrate) ; Gautheron, Emma L (CERN) ; Mariotto, Samuele (LASA, Segrate) ; Petrone, Carlo (CERN) ; Prin, Herve (CERN) ; Prioli, Marco (LASA, Segrate) ; Russenschuck, Stephan (CERN) ; Statera, Marco (LASA, Segrate) et al.
This article describes the design and development of a translating-coil magnetometer for the room-temperature magnetic measurements of the superferric, high-order corrector magnets for the high-luminosity upgrade of the Large Hadron Collider at CERN (HL-LHC). The measurement system consists of a set of induction coils, tangentially positioned on a measurement head. [...]
2024 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 9000505
Fulltext: PDF;
|
|
|
4.
|
Magnet technology and design of superconducting magnets for heavy ion gantry for hadron therapy
/ Lecrevisse, T (IRFU, Saclay) ; Kirby, G (CERN) ; Rossi, Lucio (Milan U. ; INFN, Milan) ; Carloni, Anna Giulia (INFN, Milan) ; Barna, Daniel (Wigner RCP, Budapest) ; Tommasini, Davide (CERN) ; Gautheron, Emma (CERN) ; Felcini, Enrico (CNAO, Milan) ; De Matteis, Ernesto (INFN, Milan) ; Prioli, Marco (INFN, Milan) et al.
Various initiatives in Europe have bene launched to study superconducting magnets for a rotatable gantry suitable for delivery up to 440 MeV/A carbon ions for hadron therapy. One initiative is led by INFN inside an agreement with CERN, CNAO and MedAustron aiming at designing and manufacturing a strongly curved costheta dipole (Rbending = 1.6 m) rated for 4 T central field and a ramp rate of 0.15-0.4 T/s. [...]
2023
- Published in : JACoW IPAC 2023 (2023) THPM041
Fulltext: PDF;
In : 14th International Particle Accelerator Conference (IPAC 2023), Venice, Italy, 7 - 12 May 2023, pp.THPM041
|
|
|
5.
|
Towards a Muon Collider
/ Accettura, Carlotta (CERN) ; Adams, Dean (Rutherford) ; Agarwal, Rohit (UC, Berkeley (main)) ; Ahdida, Claudia (CERN) ; Aimè, Chiara (Pavia U. ; INFN, Pavia) ; Amapane, Nicola (INFN, Turin ; Turin U.) ; Amorim, David (CERN) ; Andreetto, Paolo (INFN, Padua) ; Anulli, Fabio (INFN, Rome) ; Appleby, Robert (Manchester U.) et al.
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. [...]
arXiv:2303.08533; FERMILAB-PUB-23-123-AD-PPD-T.-
2023-09-26 - 118 p.
- Published in : Eur. Phys. J. C
- Published in : Eur. Phys. J. C
Fulltext: 2303.08533 - PDF; FERMILAB-PUB-23-123-AD-PPD-T - PDF; Fulltext from Publisher: PDF; External links: JLab Document Server; Fermilab Library Server
|
|
|
6.
|
Optimization of the High Order Correctors for HL-LHC Toward the Series Production
/ Statera, Marco (INFN, Milan) ; Alessandria, Franco (INFN, Milan ; Milan U.) ; Bellomo, Giovanni (INFN, Milan ; Milan U.) ; Broggi, Francesco (INFN, Milan) ; Imeri, Luca (INFN, Milan) ; Leone, Augusto (INFN, Milan) ; Mariotto, Samuele (INFN, Milan ; Milan U.) ; Paccalini, Antonio (INFN, Milan) ; Pasini, Alessandro (INFN, Milan) ; Pedrini, Danilo (INFN, Milan) et al.
INFN is developing at the LASA lab (Milano, Italy) the High Order (HO) corrector magnets for the High Luminosity-LHC (HL-LHC) project, which will equip the interaction regions. Five prototypes, from skew quadrupole to dodecapole, have been designed and tested at LASA. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 1-5
|
|
|
7.
|
Design Study of the Nb₃Sn Cos-Theta Dipole Model for FCC-hh
/ Valente, Riccardo U (INFN, Milan) ; Burioli, Sergio (INFN, Genoa ; Genoa U.) ; De Matteis, Ernesto (INFN, Milan) ; Fabbricatore, Pasquale (INFN, Genoa) ; Farinon, Stefania (INFN, Genoa) ; Lackner, Friedrich (CERN) ; Levi, Filippo (INFN, Genoa ; Genoa U.) ; Mariotto, Samuele (INFN, Milan) ; Musenich, Riccardo (INFN, Genoa) ; Pampaloni, Alessandra (INFN, Genoa) et al.
In the context of the Future Circular Collider hadron-hadron (FCC-hh) R&D; program, the Italian Institute of Nuclear Physics (INFN), in collaboration with CERN, is responsible for designing and constructing the Falcon Dipole (Future Accelerator post-LHC Costheta Optimized Nb₃Sn Dipole), which is an important step towards the construction of High Field Nb₃Sn magnets for a post LHC collider. The magnet is a short model with one aperture of 50 mm and the target bore field is 12 T (14 T ’ultimate’ field). [...]
JACoW, 2021 - 4 p.
- Published in : JACoW IPAC 2021 (2021) 2421-2424
Fulltext: PDF;
In : 12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.2421-2424
|
|
|
8.
|
Preliminary Design of the NB$_3$Sn $cos$ $\theta$ Short Model for the FCC
/ Pampaloni, Alessandra (INFN, Genoa) ; Bellomo, Giovanni (Milan U. ; LASA, Segrate) ; Burioli, Sergio (INFN, Genoa ; U. Genoa) ; De Matteis, Ernesto (LASA, Segrate) ; Fabbricatore, Pasquale (INFN, Genoa) ; Farinon, Stefania (INFN, Genoa) ; Lackner, Friedrich (CERN) ; Levi, Filippo (INFN, Genoa ; U. Genoa) ; Mariotto, Samuele (Milan U. ; LASA, Segrate) ; Musenich, Riccardo (INFN, Genoa) et al.
The next generation particle accelerators will need to increase by an order of magnitude the center-of-mass energy: a viable solution is a 100 TeV circular collider, temporarily called Future Circular Collider (FCC). To achieve this goal, a new generation of double aperture superconducting magnets, capable of generating a high quality, stable 16 T magnetic field in a 50 mm bore is being developed. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4900905
|
|
|
9.
|
Construction and Power Test of the Superferric Skew Quadrupole for HL-LHC
/ Statera, Marco (INFN, Milan) ; Alessandria, Franco (INFN, Milan) ; Bellomo, Giovanni (INFN, Milan ; Milan U.) ; Broggi, Francesco (INFN, Milan) ; Leone, Augusto (INFN, Milan) ; Mariotto, Samuele (INFN, Milan ; Milan U.) ; Paccalini, Antonio (INFN, Milan) ; Pasini, Alessandro (INFN, Milan) ; Pedrini, Danilo (INFN, Milan) ; Prioli, Marco (INFN, Milan) et al.
INFN is developing at LASA laboratory (Milano, Italy) the prototypes of five high order corrector magnets, from skew quadrupole to dodecapole, which will equip the high-luminosity interaction regions of the High Luminosity-LHC (HL-LHC). These magnets are based on a superferric design, which allows a relatively simple, modular and easy to construct magnet. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4003805
|
|
|
10.
|
|