|
1.
|
Chapter 2: High-field magnets
/ Védrine, P (Saclay) ; García-Tabarés, L (Madrid, CIEMAT) ; Auchmann, B (PSI, Villigen) ; Ballarino, A (CERN) ; Baudouy, B (Saclay) ; Bottura, L (CERN) ; Fazilleau, P (Saclay) ; Noe, M (KIT, Karlsruhe) ; Prestemon, S (LBNL, Berkeley) ; Rochepault, E (Saclay) et al.
High-field magnets (HFM) are among the key technologies that will enable the search for new physics at the energy frontier. Approved projects (HL-LHC) and potential future circular machines such as proton-proton Future Circular Collider (FCC-hh) and Super proton-proton Collider (SppC) require the development of superconducting (SC) magnets that produce fields beyond those attained in the LHC.The programme proposed here rests on the results achieved over the past twenty years of European and international programmes devoted to Nb$_{3}$Sn and HTS accelerator magnets, such as CARE, EuCARD, EuCARD2, ARIES and the recently launched I-FAST. [...]
2022 - 51 p.
Fulltext: PDF;
In : European Strategy for Particle Physics - Accelerator R&D Roadmap, pp.9-59
|
|
|
2.
|
|
European Strategy for Particle Physics - Accelerator R&D Roadmap
/ Adolphsen, C. ; Mounet, N. (ed.)
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way [...]
arXiv:2201.07895 ; CERN-2022-001
-
2022-03-17 - 270.
(CERN Yellow Reports: Monographs ; 1/2022)
|
10.23731/CYRM-2022-001
|
|
3.
|
Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K
/ Van Nugteren, J (CERN) ; Kirby, G (CERN) ; Bajas, H (CERN) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Chiuchiolo, A (CERN) ; Contat, P-A (CERN) ; Dhallé, M (Twente U., Enschede) ; Durante, M (Saclay) et al.
This paper describes the standalone magnet cold testing of the high temperature superconducting (HTS) magnet Feather-M2.1-2. This magnet was constructed within the European funded FP7-EUCARD2 collaboration to test a Roebel type HTS cable, and is one of the first high temperature superconducting dipole magnets in the world. [...]
2018 - 12 p.
- Published in : Supercond. Sci. Technol. 31 (2018) 065002
|
|
|
4.
|
Realization and First Test Results of the EuCARD 5.4-T REBCO Dipole Magnet
/ Durante, Maria (CEA, Saclay) ; Borgnolutti, Franck (CEA, Saclay) ; Bouziat, Denis (CEA, Saclay) ; Fazilleau, Philippe (CEA, Saclay) ; Gheller, Jean-Marc (CEA, Saclay) ; Molinie, Frederic (CEA, Saclay) ; De Antoni, Philippe (CEA, Saclay)
A high-temperature critical superconductor (HTS) dipole magnet relying on 12-mm REBCO tapes was built at CEA Saclay in 2016. Magnet studies had been started in the framework of the EuCARD High Field Magnet program and continued within a collaboration agreement between CEA-Saclay and CERN. [...]
2018 - 5.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4203805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4203805
|
|
|
5.
|
The EuCARD2 Future Magnets Program for Particle Accelerator High-Field Dipoles: Review of Results and Next Steps
/ Rossi, Lucio (CERN) ; Badel, Arnaud (IUT, Grenoble) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Barth, Christian (Geneva U.) ; Betz, Ulrich (SIS GmbH) ; Bottura, Luca (CERN) ; Broggi, Francesco (LASA, Segrate) ; Chiuchiolo, Antonella (CERN) et al.
The EuCARD2 collaboration aims at the development of a 10 kA-class superconducting, high current density cable suitable for accelerator magnets, to be tested in small coils and magnets capable to deliver 3-5 T when energized in stand-alone mode, and 15-18 T when inserted in a 12-13 T background magnet. REBCO tape, assembled in a Roebel cable, was selected as conductor. [...]
2017 - 10 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2017) 4001810
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4001810
|
|
|
6.
|
First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project
/ Kirby, Glyn A (CERN) ; van Nugteren, Jeroen (CERN) ; Bajas, H (CERN) ; Benda, V (CERN) ; Ballarino, A (CERN) ; Bajko, M (CERN) ; Bottura, Luca (CERN) ; Broekens, K (CERN) ; Canale, M (CERN) ; Chiuchiolo, A (CERN) et al.
EuCARD-2 is a project partly supported by FP7-European Commission aiming at exploring accelerator magnet technology for 20 T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high field magnets in the USA and Japan. [...]
2017 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4003307
Fulltext: PDF;
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4003307
|
|
|
7.
|
Status of the Demonstrator Magnets for the EuCARD-2 Future Magnets Project
/ Kirby, G (CERN) ; Rossi, L (CERN) ; Badel, A (Grenoble, INP) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Dhalle, M (Twente U., Enschede) ; Durante, M (Saclay) ; Fazilleau, P (Saclay) ; Fleiter, J (CERN) et al.
EuCARD-2 is a project partly supported by FP7 European Commission aiming at exploring accelerator magnet technology for 20-T dipole operating field. The EuCARD-2 collaboration is liaising with similar programs for high-field magnets in the U.S. [...]
2016 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4003307
In : 12th European Conference on Applied Superconductivity, Lyon, France, 06 - 10 Sep 2015, pp.4003307
|
|
|
8.
|
High temperature superconductors towards applications : at SUPRA group, Institute for Technical Physics, Karlsruhe Institute of Technology
/ Kario, A. (KIT) ; Kudymow, A. (KIT) ; Kling, A. (KIT) ; Jung, A. (KIT) ; Grilli, F. (KIT) ; Otten, S. (KIT) ; Ringsdorf, B. (KIT) ; Runtsch, B. (KIT) ; Nast, R. (KIT) ; Strauss, S. (KIT) et al.
CERN-ACC-2017-0001.-
Geneva : CERN, 2017
Fulltext: PDF;
|
|
|
9.
|
Latest developments and challenges in developing Coated Conductor magnets for accelerators within EuCARD-2
/ Goldacker, W (KIT) ; Kario, A (KIT) ; Otten, S (KIT) ; Kirby, G (CERN) ; Bajas, H (CERN) ; van Nugteren, J (CERN) ; Ballarino, A (CERN) ; Bajko, M (CERN) ; Bottura, L (CERN) ; de Rijk, G (CERN) et al.
CERN-ACC-SLIDES-2016-0021.-
Geneva : CERN, 2016
Fulltext: PDF;
|
|
|
10.
|
The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets
/ Rossi, L (CERN) ; Badel, A (Grenoble, INP) ; Bajko, M (CERN) ; Ballarino, A (CERN) ; Bottura, L (CERN) ; Dhallé, M M J (Twente U., Enschede) ; Durante, M (IRFU, Saclay) ; Fazilleau, Ph (IRFU, Saclay) ; Fleiter, J (CERN) ; Goldacker, Wilfried (KIT, Karlsruhe) et al.
EuCARD-2 is a project supported by FP7-European Commission that includes, inter alia, a work-package (WP10) called “Future Magnets.” This project is part of the long term development that CERN is launching to explore magnet technology at 16 T to 20 T dipole operating field, within the scope of a study on Future Circular Colliders. The EuCARD2 collaboration is closely liaising with similar programs for high field accelerator magnets in the USA and Japan. [...]
2015 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 25 (2015) 4001007
In : Applied Superconductivity Conference 2014, Charlotte, NC, USA, 10 - 15 Aug 2014, pp.4001007
|
|