Ikeda, Hiroshi - Sökresultat - CERN Document Server

Sök samlingar:

Sortera efter:	Visa sökresultat:	Visningsformat:

CERN Document Server	Sök i 3 journaler efter:	Sökningen tog 0.53 sekunder.

Magnetic Field Design of a Full-Scale Prototype of the HL-LHC Beam Separation Dipole With Geometrical and Iron-Saturation Corrections / Suzuki, Kento (KEK, Tsukuba) ; Higashi, Norio (KEK, Tsukuba) ; Iida, Masahisa (KEK, Tsukuba) ; Ikeda, Hiroshi (KEK, Tsukuba) ; Ikemoto, Yukiko (KEK, Tsukuba) ; Kawamata, Hiroshi (KEK, Tsukuba) ; Kimura, Nobuhiro (KEK, Tsukuba) ; Nakamoto, Tatsushi (KEK, Tsukuba) ; Ogitsu, Toru (KEK, Tsukuba) ; Ohata, Hirokatsu (KEK, Tsukuba) et al.
High Energy Research Organization (KEK) has developed three short-scale model magnets of the beam separation dipole, MBXF, which is to be installed for the High Luminosity Large Hadron Collider, HL-LHC, in CERN. We will soon undertake production of a prototype of MBXF and its magnetic design has to be finalized before the fabrication. [...]
2020 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4002706

Detaljerad journal - Similar records

Improvement in Training Performance by Enhancing Coil Mechanical Support in the Beam Separation Dipole Model Magnet for the HL-LHC Upgrade / Sugano, Michinaka (KEK, Tsukuba) ; Suzuki, Kento (KEK, Tsukuba) ; Nakamoto, Tatsushi (KEK, Tsukuba) ; Higashi, Norio (KEK, Tsukuba) ; Iida, Masahisa (KEK, Tsukuba) ; Ikeda, Hiroshi (KEK, Tsukuba) ; Ikemoto, Yukiko (KEK, Tsukuba) ; Kawamata, Hiroshi (KEK, Tsukuba) ; Kimura, Nobuhiro (KEK, Tsukuba) ; Ogitsu, Toru (KEK, Tsukuba) et al.
Nb-Ti based large-aperture beam separation dipoles (MBXFs) will be installed on both sides of two interaction points, ATLAS and CMS, for the high-luminosity LHC upgrade. The most important requirements for MBXF is a coil aperture of 150 mm and the field integral of 35 T·m. [...]
2020 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4001806

Detaljerad journal - Similar records

Performance of the Quench Protection Heater for the HL-LHC Beam Separation Dipole / Suzuki, Kento (KEK, Tsukuba) ; Higashi, Norio (KEK, Tsukuba) ; Iida, Masahisa (KEK, Tsukuba) ; Ikeda, Hiroshi (KEK, Tsukuba) ; Ikemoto, Yukiko (KEK, Tsukuba) ; Kawamata, Hiroshi (KEK, Tsukuba) ; Kimura, Nobuhiro (KEK, Tsukuba) ; Nakamoto, Tatsushi (KEK, Tsukuba) ; Ogitsu, Toru (KEK, Tsukuba) ; Ohata, Hirokatsu (KEK, Tsukuba) et al.
In collaboration with CERN, High Energy Accelerator Research Organization (KEK) has designed and developed short-scale model magnets of the beam separation dipole, MBXF, which will be installed for the High Luminosity Large Hadron Collider, HL-LHC. A new quench protection heater for MBXF was designed and tested during the cold test of the short-scale models. [...]
2020 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4701206

Detaljerad journal - Similar records

Se också: liknande författarnamn
287	Ikeda, H
2	Ikeda, H.
1	Ikeda, Haruo
1	Ikeda, Hayato
1	Ikeda, Hiro
2	Ikeda, Hiroaki
22	Ikeda, Hirokazu
5	Ikeda, Hiroyuki
2	Ikeda, Hisashi
1	Ikeda, Hisatochi
12	Ikeda, Hitomi

Vill du bli notifierad om nya resultat till den här sökfrågan?
Sätta upp ett epost-alarm eller starta en prenumeration på RSS-strömmen.

Har du inte funnit vad du söker efter? Försök på andra platser:
Ikeda, Hiroshi i Amazon Ikeda, Hiroshi i CERN EDMS Ikeda, Hiroshi i CERN Intranet Ikeda, Hiroshi i CiteSeer Ikeda, Hiroshi i Google Books Ikeda, Hiroshi i Google Scholar Ikeda, Hiroshi i Google Web Ikeda, Hiroshi i IEC	Ikeda, Hiroshi i IHS Ikeda, Hiroshi i INSPIRE Ikeda, Hiroshi i ISO Ikeda, Hiroshi i KISS Books/Journals Ikeda, Hiroshi i KISS Preprints Ikeda, Hiroshi i NEBIS Ikeda, Hiroshi i SLAC Library Catalog Ikeda, Hiroshi i Scirus

CERN Document Server

Access articles, reports and multimedia content in HEP

Main menu

CERN Accelerating science