|
1.
|
|
|
2.
|
Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade
/ Garcia Fajardo, L. (LBL, Berkeley) ; Ambrosio, G. (Fermilab) ; Yahia, A. Ben (Brookhaven) ; Cheng, D.W. (LBL, Berkeley) ; Ferracin, P. (LBL, Berkeley) ; Ferradas Troitino, J. (CERN) ; Izquierdo Bermudez, S. (CERN) ; Muratore, J. (Brookhaven) ; Prestemon, S. (LBL, Berkeley) ; Ray, K.L. (LBL, Berkeley) et al.
Under the U.S. High Luminosity LHC Accelerator Upgrade Project (HL-LHC AUP), the 150 mm bore, high-field Nb3Sn low-{̱e̱ṯa̱}̱ MQXFA quadrupole magnets are being fabricated, assembled and tested, in the context of the CERN Hi-Luminosity LHC (HL-LHC) upgrade. [...]
arXiv:2303.16795; FERMILAB-PUB-23-116-TD.-
2023-03-27 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4003205
Fulltext: 2303.16795 - PDF; 4b8cc3a91b35c5867bfac57ac156409a - PDF; External link: Fermilab Accepted Manuscript
|
|
|
3.
|
Status and challenges of the interaction region magnets for HL-LHC
/ Todesco, E (CERN) ; Izquierdo Bermudez, S (CERN) ; Foussat, A (CERN) ; Gautheron, E (CERN) ; Kirby, G (CERN) ; Felice, H (CERN) ; Perez, J C (CERN) ; Fleiter, J (CERN) ; Barth, C (CERN) ; Milanese, A (CERN) et al.
About one hundred magnets of six different types shall be installed in the High Luminosity LHC (HL-LHC) in the years 2026-2028 at CERN. The magnets design, construction and test are based on CERN collaborations with institutes and industrial partners in USA, Spain, Italy, Japan and China. [...]
FERMILAB-PUB-22-861-TD.-
2023 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4001608
Fulltext: PDF; External link: Fermilab Accepted Manuscript
|
|
|
4.
|
MQXFA Final Design Report
/ Ambrosio, Giorgio
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS) [...]
arXiv:2203.06723 ; FERMILAB-TM-2773-TD ; US-HiLumi-doc-948
-
120 p.
|
|
|
5.
|
Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC
/ Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Izquierdo, Gonzalo Arnau (CERN) ; Baldini, Maria (Fermilab) ; Ballarino, Amalia (CERN) ; Barth, Christian (CERN) ; Yahia, Anis Ben (Brookhaven) ; Blowers, James (Fermilab) et al.
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. [...]
arXiv:2301.09523; FERMILAB-PUB-22-855-TD.-
2023-08 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4003508
Fulltext: 2301.09523 - PDF; 81b192c337ae5d5acaec37450e135529 - PDF; External link: Fermilab Library Server
|
|
|
6.
|
Test Results of the First 3.7 m long Nb$_3$Sn Quadrupole by LARP and Future Plans
/ LARP Collaboration
In December 2009 during its first cold test, LQS01, the first Long Nb$_3$Sn Quadrupole made by LARP (LHC Accelerator Research Program, a collaboration of BNL, FNAL, LBNL and SLAC), reached its target field gradient of 200 T/m. This target was set in 2005 by the US Department of Energy, CERN and LARP, as a significant milestone toward the development of Nb$_3$Sn quadrupoles for possible use in LHC luminosity upgrades. [...]
FERMILAB-PUB-10-312-TD.-
2010 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 21 (2010) 1858-1862
Fulltext: PDF; External link: FERMILABPUB
In : Applied Superconductivity Conference 2010, Washington, DC, USA, 1 - 6 Aug 2010, pp.1858-1862
|
|
|
7.
|
|
|
8.
|
Design and Fabrication of the 1.9 K Magnet Test Facility at BNL, and Test of the First 4-m-Long MQXF Coil
/ Muratore, Joseph (Brookhaven Natl. Lab.) ; Anerella, Michael (Brookhaven Natl. Lab.) ; Joshi, Piyush (Brookhaven Natl. Lab.) ; Kovach, Paul (Brookhaven Natl. Lab.) ; Marone, Andrew (Brookhaven Natl. Lab.) ; Wanderer, Peter (Brookhaven Natl. Lab.)
The future high luminosity upgrade of the Large
Hadron Collider (LHC) at CERN will include 20 4.2-m-long Nb$_3$Sn
high gradient quadrupole magnets, which will be components of
the triplets for two LHC insertion regions. In order to test these
and four preproduction models, the vertical superconducting magnet test facility of the Superconducting Magnet Division (SMD) at
Brookhaven National Laboratory (BNL) has been upgraded to perform testing in superfluid He at 1.9 K and 1 bar, the operational
condition at the LHC. [...]
2018 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 9500104
|
|
|
9.
|
Assembly and Test of a Support Structure for 3.6 m Long Nb$_3$Sn Racetrack Coils
/ Ferracin, P ; Ambrosio, G ; Anerella, M ; Caspi, S ; Cheng, D W ; Felice, H ; Hafalia, A R ; Hannaford, C R ; Lietzke, A F ; Lizarazo, J et al.
The LHC accelerator research program (LARP) is currently developing 4 m long Nb$_3$Sn quadrupole magnets for a possible upgrade of the LHC Interaction Regions (IR). In order to provide a reliable test bed for the fabrication and test of long Nb$_3$Sn coils, LARP has started the development of the long racetrack magnet LRS01. [...]
2008 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 18 (2008) 167-170
In : 20th International Conference on Magnet Technology, Philadelphia, PA, USA, 27 - 31 Aug 2007, pp.167-170
|
|
|
10.
|
Construction and Test of 3.6 m Nb$_3$Sn Racetrack Coils for LARP
/ Wanderer, P (Brookhaven) ; Ambrosio, G (Fermilab) ; Anerella, M (Brookhaven Natl. Lab.) ; Barzi, E (Fermilab) ; Bossert, R (Fermilab) ; Caspi, S (LBNL, Berkeley) ; Cheng, D W (LBNL, Berkeley) ; Cozzolino, J (Brookhaven Natl. Lab.) ; Dietderich, D R (LBNL, Berkeley) ; Escallier, J (Brookhaven Natl. Lab.) et al.
Development of high-performance Nb$_3$Sn quadrupoles is one of the major goals of the LHC Accelerator Research Program (LARP). As part of this program, long racetrack magnets were made in order to check the fabrication steps for long Nb$_3$Sn coils, that the changes in coil length that take place during reaction and cooldown are correctly accounted for in the quadrupole design, and the use of a long aluminum shell for the support structure. [...]
2008 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 18 (2008) 171-174
In : 20th International Conference on Magnet Technology, Philadelphia, PA, USA, 27 - 31 Aug 2007, pp.171-174
|
|