|
Author(s)
|
Dai, Chao (Hefei, Inst. Plasma Phys.) ; Wu, Yu (Hefei, Inst. Plasma Phys.) ; Sedlak, Kamil (LPHE, Lausanne) ; Bajas, Hugo (LPHE, Lausanne) ; Nijhuis, Arend (Twente U., Enschede) ; Bruzzone, Pierluigi (LPHE, Lausanne) ; Devred, Arnaud (CERN) ; Qin, Jinggang (Hefei, Inst. Plasma Phys.) ; Liu, Yunhao (Hefei, CUST) ; Xue, Tianjun (Showa Wire Cable, Kawasaki) ; Wu, Zuojiafeng |
|
Abstract
| The engineering design of the CFETR TF prototype coil and conductors has been completed. The wind-package (WP) of the coil is graded into three regions based on the magnetic field distribution for saving cost. High-Jc Nb$_3$Sn strand, ITER-like Nb$_3$Sn strand and Nb-Ti strand are applied for high-field, mid-field and low-field WP respectively. In order to verify the conductor design, full-size short samples have been manufactured for the three types of conductors. The samples are tested in the SULTAN facility at CRPP in Villigen, Switzerland. At present, the test of Nb-Ti conductor for low-field WP is finished, DC and AC tests were performed. In DC test, several current sharing temperature (Tcs) measurements were performed with 500 electromagnetic cycles and one thermal cycle. Additionally, minimum quench energy (MQE) measurement was performed for investigating the stability of the conductor. The test results and analysis are reported in this paper. |