| Hauptseite > Test Result of the HL-LHC Beam Separation Dipole Model Magnet With the New Iron Cross Section |
| Published Articles | |
| Title | Test Result of the HL-LHC Beam Separation Dipole Model Magnet With the New Iron Cross Section |
| Author(s) | Suzuki, Kento (KEK, Tsukuba) ; Enomoto, Shun (KEK, Tsukuba) ; Higashi, Norio (KEK, Tsukuba) ; Iida, Masahisa (KEK, Tsukuba) ; Ikemoto, Yukiko (KEK, Tsukuba) ; Kawamata, Hiroshi (KEK, Tsukuba) ; Kimura, Nobuhiro (KEK, Tsukuba) ; Nakamoto, Tatsushi (KEK, Tsukuba) ; Ogitsu, Toru (KEK, Tsukuba) ; Ohata, Hirokatsu (KEK, Tsukuba) ; Okada, Naoki (KEK, Tsukuba) ; Okada, Ryutaro (KEK, Tsukuba) ; Sugano, Michinaka (KEK, Tsukuba) ; Musso, Andrea (CERN) ; Todesco, Ezio (CERN) |
| Publication | 2019 |
| Number of pages | 5 |
| In: | IEEE Trans. Appl. Supercond. 29 (2019) 4000905 |
| DOI | 10.1109/TASC.2019.2892153 |
| Subject category | Accelerators and Storage Rings |
| Project | CERN HL-LHC |
| Abstract | We report the test results of the second short model magnet of the beam separation dipole for the High Luminosity Large Hadron Collider. The test shows that the second model has a good training performance and is capable of operating at the ultimate current that corresponds to 108% of the nominal one. Magnetic field measurements reveal that $b_3$is around 18 units, which is 15 units higher than the calculations. This can be explained in part by geometrical coil deformation caused during the construction process. |