Ferrari

This 1982 Ferrari 512 BBi was delivered new to Ferrari dealer Charles Pozzi S.A. in France and is one of 1,007 fuel-injected examples produced during a four-year production run, a relatively small number of which were optioned from the factory with Zegna interior wool accents. The car is powered by a 4.9-liter F110A flat-12 paired with a…

This 1983 Ferrari 308 GTSi Quattrovalvole was initially delivered to Walnut Creek Ferrari in California, was acquired by the current owner in 2017, and has remained in the state from new through the present. Powered by a 2.9-liter quad-cam V8 paired with a five-speed manual transaxle, the car is finished in Rosso Corsa over beige leather…

This 1991 Ferrari 348 TS remained registered in California until 2012, and it has spent much of the subsequent time in Ohio and Florida. It is powered by a 3.4-liter DOHC V8 linked with a dogleg five-speed manual transaxle and a limited-slip differential, and it is finished in Nero over Nero Connolly leather.

These four 14×7″ Borrani wire wheels were removed from a Ferrari 275 GTB/4, though they may fit other models. Each features chrome-plated steel spokes and Borrani stickers and stampings. Acquired by the seller in 1994, the set is now offered at no reserve in Stroudsburg, Pennsylvania. Each 72-spoke wheel measures 14×7″ and has a…

This 2017 Ferrari F12berlinetta has 661 miles following registration history in California, and it is powered by a 6.3-liter F140 V12 connected to a seven-speed dual-clutch automatic transaxle and an electronic limited-slip differential. Finished in Rosso Mugello over Nero leather and Alcantara upholstery, the car was optioned with the Adaptive…

These 20” wheels measure 9” and 11” in width and were factory-optional equipment on Ferrari 488 GTBs. The wheels have a dark gray finish, and manufacturer markings show part numbers, production dates, sizing, and offset specifications. The set was removed from the seller's 2016 488 and is now offered in California.

This 1972 Ferrari Dino 246 GT is a European-specification example that was imported to the US around 2007 and acquired by the seller on BaT in July 2023. A refurbishment under prior ownership included an overhaul of the 2.4-liter V6, a repaint in pale blue, and a re-trim of the interior in tan leather with Daytona-style seat inserts.

This 2021 Ferrari F8 Tributo is finished in Grigio Silverstone over black and red leather upholstery, and it was ordered with a CAD ~$80k suite of optional and bespoke equipment, which included carbon-fiber interior elements, titanium exhaust pipes, red brake calipers, and large-size Daytona racing seats.

This 2001 Ferrari 360 Spider is a European-market car that has 17k miles and was imported into the United States in November 2001. It is finished in Blu Tour de France over blue leather, and it is powered by a 3.6-liter V8 paired with a six-speed F1 sequential transaxle. Equipment includes a Becker Performance exhaust system, 18" five-spoke alloy…

This 2018 Ferrari GTC4Lusso remained registered in Montana and California through the current owner's acquisition in 2022 and is powered by a 6.3-liter V12 that drives all four wheels through a seven-speed dual-clutch automatic transmission and a 4RM EVO four-wheel-drive system. Finished in Grigio Silverstone over Bordeaux leather upholstery, the…

This 1989 Ferrari Mondial T coupe is powered by a 3.4-liter F119D/G V8 paired with a five-speed manual transaxle, and its odometer shows 40k miles. Finished in Rosso Corsa over Beige leather, the car is equipped with a limited-slip differential, 16" five-spoke alloy wheels, a gated shifter, an Alpine CD stereo, power windows, and air conditioning.

This 2000 Ferrari 360 Modena Challenge race car was built to compete in the Ferrari Challenge racing series and spent several years under the ownership of Ferrari Quebec in Canada. It was fitted with a replacement 3.6-liter quad-cam V8 in 2019 before being purchased by the selling dealer in 2021 and relocated to Ontario.

This 1986 Ferrari Mondial 3.2 cabriolet shows 26k miles, and it is finished in Nero over beige leather. Work in July 2024 totaling approximately $19k included resealing the 3.2-liter F105C V8 and replacing the belts, clutch, water pump, fuel accumulator, alternator, thermostat, engine mounts, and transaxle and oil pan gaskets.

This 1982 Ferrari 308 GTBi is powered by a fuel-injected 2.9-liter quad-cam V8 linked with a five-speed manual transaxle and a limited-slip differential, and it is finished in Bianco over beige leather. The car is said to have remained with its original owner until the selling dealer acquired the car in December 2023.

This 1989 Ferrari Testarossa is a European-specification model that was delivered new in the Middle East and is said to have been imported to the United States from the United Arab Emirates in 1989. The car is finished in Rosso Corsa and features pop-up headlights, an asymmetrical front cooling duct, and a US-spec rear bumper.

This two-piece luggage set was produced by Schedoni of Modena for use in a Ferrari 458 Spider, and each bag has a black leather exterior, leather handles, and yellow stitching. Additional features include silver hardware, embossed prancing horse logos, “458 Spider” script, zippered interior pockets, and Ferrari-branded interior linings.

This 2023 Ferrari F8 Spider was first delivered to Ferrari of New England in Norwood, Massachusetts, and was put in storage following its initial purchase by the seller in October 2023. Now with 116 miles, it is powered by a twin-turbocharged 3.9-liter V8 paired with a seven-speed dual-clutch automated transaxle and is finished in Rosso Corsa over…

This 1999 Ferrari 550 Maranello is a left-hand-drive European-market example that was imported into the US in September 2000, and it was purchased in 2004 by the current owner. Powered by a 5.5-liter V12 paired with a six-speed manual transaxle, the car is finished in Nero Daytona over Nero leather upholstery.

These 19″ wheels measure 8″ and 10.5″ in width and were manufactured by BBS in Germany for use on Ferrari F430 Challenge models. They feature center-locking hubs, a 14-spoke design, a silver finish, and BBS stickers. Casting marks on the wheels indicate part numbers, production dates, sizing, and offset specifications.