Table saw tapering jig

You can buy or build more elaborate tapering jigs, but this simple helper will handle most of your tapering chores.

Get more out of your table saw with these four handy jigs. These simple jigs take advantage of the table saw’s speed and accuracy without tempting you to perform risky operations.

These simple shop-made jigs and accessories make work at the table saw safe, easy, and accurate.

A DIY tapering jig is an easy way to taper furniture legs, rip a board on an angle, or straighten a live edge by using it as a jointing jig. Build this simple woodworking jig for your table saw and cut any angle with repeated precision.

Thin Strip Jig for the Table Saw: So at the time of making this jig I knew I was going to need to cut A LOT of thin strips of wood for a big project. And this jig does the job great! It allows you to cut as many strips of wood that are the same thickness as you can. All without movi…

12 Router Fence Plans: From Split Fences to Micro Adjusters! |

Make a Table Saw Tapering Iig: I needed to be able to taper a few boards for a project I'm working on so I had to make a tapering jig. This one goes from straight to "are you sure you need that much?"

manglum's Project

Using a jointer jig allows you to create straight edges on boards using only a table saw. Learn to build your own jointer jig using this guide.

Here’s a classic jig for cutting angled parts on your table saw. Build it from two 30-in. long x 2-1/2 in. wide boards connected on one end.