Iron handles

*Before Purchasing* Please note that all items are hand made personally by myself, and will take 1-2 weeks to make. If you have a strict deadline, the best hardware for you may be factory made ready to ship items. However, if you are interested in geunine handmade hardware and understand this art work takes time to make, I would be more than happy to work with you. All work is done in a small blacksmith shop located on my property in Ontario, Canada. Because each piece is hand made they all…

This solid cast iron pull handle will add an industrial feel to cupboard doors and drawers. Inspired by old riveted handles, this pull handle will give your kitchen that old factory feel whilst being pleasant and interesting to the eye. A truly high-quality and hard-wearing pull handle cast from solid iron with a lacquered finish. 128mm Handle Dimensions Length - 174mm Height - 15mm Fixing Centres - 128mm Depth: 25mm 160mm Handle Dimensions Length - 206mm Height - 15mm Fixing Centres - 160mm…

These custom made draw pulls are made of 1", 2", 3" and, 4" wide by 3/8" thick carbon steel. 1" Pull has a single hole 2" Wide Pull has a 1" on center hole spacing 3" Wide Pull has a 2" on center hole spacing 4" Wide Pull has a 3" on center hole spacing Available in four finishes RAW CLEAR WAXED BLACK IRON WITH WAX FINISH MATCHING HARDWARE INCLUDED *HARDWARE INSTALLATION RECOMMENDATIONS -We recommend pre-drilling with a 3/16" drill bit the full length of the screw. -Use a 7/16" 12 point…

Elevate Your Home with Timeless Craftsmanship! Introducing the River Twist Iron Door Pull--a stunning, handcrafted addition that combines rustic beauty with durability. Inspired by nature's elegance, this door pull is designed to withstand the test of time while enhancing your home's aesthetic. Key Features: Beautifully Handcrafted Design: The River Twist pattern features nature-inspired curves and twists, making this door pull both a functional hardware piece and a work of art. Sturdy…

This listing is for a single small ring handle made in the forge here at our family farm. They are made of a solid piece of 5/16" round stock steel which has been shaped into a ring. The ring is fitted into the mounting bar which is made of a single piece of 3/4" square stock steel. The ring measures about 2.25" in diameter. The ring is able to move freely. Overall height of each piece is about 3" and will come out from the surface about 1 3/8". Please note sizes are approximate and will…

Discover Melbourne's unique wrought iron door handles and pulls, combining elegance, strength, and durability. Visit our site for samples today.

These sturdy door pulls were made by hand in the forge on our Pennsylvania farm. Listing is for a set of 2. They measure approximately 8.75" high x 2" wide. The handles are made of authentic railroad spikes and will come away from the wall about 3" and are 6.5" long. Please note sizes are approximate and will vary slightly as each piece is a handmade original. Feel free to contact us about a custom order if you need them to be an exact size. The back plate has hand hammered texturing around…

Traditional Tuscan iron cabinet handle is the typical design found in Tuscany featuring a simple, curled square bar with a heavily hammered end creating a slight flare making it compatible with most all design styles. 6" - made from 5/8" material with 1 5/8" standoff 8" - made from 5/8" material with 2" stand off 10" - sold with tabs overall size 12" made from 3/4" material with 2 1/4" stand off 12" - sold with tabs overall size 13 3/4" made from 3/4" mate #SimpleWeldingProjects