主页 无线连接 低于 1GHz 产品 Sub-1GHz 收发器
主页
无线连接
低于 1GHz 产品
Sub-1GHz 收发器

CC1070

不推荐用于新设计

用于窄带和多通道应用的单芯片、低功率、低成本 CMOS FSK/GFSK/ASK/00K 射频变送器

立即订购
数据表
勘误

CC1070

不推荐用于新设计
数据表 立即订购

产品详情

Protocols Proprietary Modulation scheme 2(G)FSK, ASK, OOK Frequency bands 402-470, 804-940 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.1536 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK, ASK, OOK Frequency bands 402-470, 804-940 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.1536 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGW) 20 25 mm² 5 x 5 VQFN (RSQ) 20 25 mm² 5 x 5
  • True single chip UHF RF transmitter
  • Frequency range 402 - 470 MHz and 804 - 940 MHz
  • Programmable output power
  • Low supply voltage (2.3 to 3.6 V)
  • Very few external components required
  • Small size (QFN 20 package)
  • Pb-free package
  • Data rate up to 153.6 kBaud
  • OOK, FSK and GFSK data modulation
  • Fully on-chip VCO
  • Programmable frequency makes crystal temperature drift compensation
    possible without TCXO
  • Suitable for frequency hopping systems
  • Suited for systems targeting compliance with EN 300 220, FCC
    CFR47 part 15 and ARIB STD T-67
  • Development kit available
  • Easy-to-use software for generating the CC1070 configuration data
  • Applications
    • Narrowband low power UHF wireless data transmitters
    • 402 / 424 / 426 / 429 / 433 / 447 / 449 / 469 / 868
      and 915 MHz ISM/SRD band systems
    • TPMS – Tire Pressure Monitoring Systems
    • AMR – Automatic Meter Reading
    • Wireless alarm and security systems
    • Home automation
    • Low power telemetry
  • True single chip UHF RF transmitter
  • Frequency range 402 - 470 MHz and 804 - 940 MHz
  • Programmable output power
  • Low supply voltage (2.3 to 3.6 V)
  • Very few external components required
  • Small size (QFN 20 package)
  • Pb-free package
  • Data rate up to 153.6 kBaud
  • OOK, FSK and GFSK data modulation
  • Fully on-chip VCO
  • Programmable frequency makes crystal temperature drift compensation
    possible without TCXO
  • Suitable for frequency hopping systems
  • Suited for systems targeting compliance with EN 300 220, FCC
    CFR47 part 15 and ARIB STD T-67
  • Development kit available
  • Easy-to-use software for generating the CC1070 configuration data
  • Applications
    • Narrowband low power UHF wireless data transmitters
    • 402 / 424 / 426 / 429 / 433 / 447 / 449 / 469 / 868
      and 915 MHz ISM/SRD band systems
    • TPMS – Tire Pressure Monitoring Systems
    • AMR – Automatic Meter Reading
    • Wireless alarm and security systems
    • Home automation
    • Low power telemetry

CC1070 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868 and 915 MHz, but can easily be programmed for multi-channel operation at other frequencies in the 402 - 470 and 804 - 940 MHz range.

The CC1070 is especially suited for narrowband systems with channel spacings of 12.5 or 25 kHz complying with ARIB STD T-67 and EN 300 220.

The CC1070 main operating parameters can be programmed via a serial bus, thus making CC1070 a very flexible and easy to use transmitter. In a typical application CC1070 will be used together with a microcontroller and a few external passive components.

CC1070 is a true single-chip UHF transmitter designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868 and 915 MHz, but can easily be programmed for multi-channel operation at other frequencies in the 402 - 470 and 804 - 940 MHz range.

The CC1070 is especially suited for narrowband systems with channel spacings of 12.5 or 25 kHz complying with ARIB STD T-67 and EN 300 220.

The CC1070 main operating parameters can be programmed via a serial bus, thus making CC1070 a very flexible and easy to use transmitter. In a typical application CC1070 will be used together with a microcontroller and a few external passive components.
filter 查找其他 Sub-1GHz 收发器
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 数据表 Single-Chip Low Power RF Transmitter for Narrowband Systems 数据表 (Rev. A) 2010年 1月 6日
* 辐射与可靠性报告 CC1070 Reliability Report 2006年 4月 28日
* 勘误表 CC1070 Errata Notes 2006年 1月 31日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点