LDC1041

現行

單通道、5V、24 位元 L、8 位元 Rp、電感數位轉換器

立即訂購

產品規格表

document-pdfAcrobat LDC1041: 8-bit Rp, 24-bit L Inductance-to-Digital Converter with SPI datasheet (英文) PDF | HTML

LDC1041

現行

產品規格表

立即訂購

產品詳細資料

Number of input channels

1

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Number of input channels

1

Rating

Catalog

Operating temperature range (°C)

-40 to 125

WSON (NHR)

16

20 mm² 5 x 4

Remote sensor placement (decoupling the LDC from
harsh environments)
High durability (by virtue of contactless operation)
Higher flexibility for system design (using coils or
springs as sensors)
Insensitive to non-conductive environmental interferers
(such as dirt, dust, oil etc.)
Magnet-free operation
Sub-micron precision
Supply Voltage: 5 V, typ
Supply voltage, IO: 1.8V to 5.5V
Stand-by current: 250µA, typ
Rp resolution: 8-bit
L resolution: 24-bit
LC frequency range: 5kHz to 5MHz

Remote sensor placement (decoupling the LDC from
harsh environments)
High durability (by virtue of contactless operation)
Higher flexibility for system design (using coils or
springs as sensors)
Insensitive to non-conductive environmental interferers
(such as dirt, dust, oil etc.)
Magnet-free operation
Sub-micron precision
Supply Voltage: 5 V, typ
Supply voltage, IO: 1.8V to 5.5V
Stand-by current: 250µA, typ
Rp resolution: 8-bit
L resolution: 24-bit
LC frequency range: 5kHz to 5MHz

Inductive sensing is a contactless, short-range sensing technology enabling high-resolution and low-cost position sensing of conductive targets, even in harsh environments. Using a coil or spring as a sensor, the LDC1041 inductance-to-digital converter provides system designers a way to achieve high performance and reliability at a lower system cost than other competing solutions.

The LDC1041 is pin compatible with the LDC1000 (16-bit Rp/24-bit L) and the LDC1051 (8-bit Rp). This family of devices offers system designers different resolution options based on their application and system requirements.

The LDC1041 is available in a 5mm x 4mm WSON-16 package. Device programming via SPI allows for easy configuration using a microcontroller.

Inductive sensing is a contactless, short-range sensing technology enabling high-resolution and low-cost position sensing of conductive targets, even in harsh environments. Using a coil or spring as a sensor, the LDC1041 inductance-to-digital converter provides system designers a way to achieve high performance and reliability at a lower system cost than other competing solutions.

The LDC1041 is pin compatible with the LDC1000 (16-bit Rp/24-bit L) and the LDC1051 (8-bit Rp). This family of devices offers system designers different resolution options based on their application and system requirements.

The LDC1041 is available in a 5mm x 4mm WSON-16 package. Device programming via SPI allows for easy configuration using a microcontroller.

filter

尋找其它電感式感測器 AFE

下載