[Build Guide] Block 1.5 SOPMOD M4: America's Workhorse

[Build Guide] Block 1.5 SOPMOD M4: America’s Workhorse

SOPMOD 1.5 Clone (4)

Want to clone one of the best known M4 configurations? We've got you covered with our complete build list for the Block 1.5 SOPMOD.

BY Derrick Campbell,

Published May 11, 2019

2 Comments

We review products independently. When you buy through links on our site, we may earn a commission to help support our testing. Learn more.

JUMP TO SECTION Jump To:

Trending: Ammo in Stock, Best AR-15s, & Best Shooting Ear Protection

In today’s market, building an AR-15 is as open-ended as decorating your home. Thousands of aftermarket parts make the potential combinations nearly limitless.

SOPMOD 1.5 Clone — The Block 1.5 SOPMOD M4 Clone

For some, however, the Build-A-Bear Workshop mentality is boring and are taking a different route. The building of civilian rifles with the intention of replicating a modern military firearm, or simply “Cloning” by those in the community. To summarize cloning as simply as possible, it is LARP–ing but with real guns. If you would like to dive down that rabbit hole and learn the details of cloning I highly suggest reading CLONING DONE RIGHT: Building America’s Rifle by Jeff Gurwitch, a SOF veteran and prominent member of the online cloning community.

What is the 1.5?

In a nutshell, the Block 1.5 PR (Phased Replacement) is an old dog that has learned some new tricks.

It is a very “plain” 14.5” M4 with the SOPMOD Block 2 accessory suite on it. The base rifle is extremely boring, nothing about it has the “wow factor” by today’s standards. But, the rifle is proven and does the job needed.

Build List

For the puritans out there, this build is definitely not 100% “clone correct”, there are a few parts I did not have or were unable to find.

Rifle	Accessories
Colt 14.5″ Upper	EOTech 553 Holographic Sight
SureFire 3 Prong Flash Hider	PEQ-25 IR Laser
KAC RAS Rail System	Insight Dual Switch
UTG Tri-Rail Extension	SureFire RC2 Suppressor
Colt 6920 Complete Lower
B5 SOPMOD Stock

Now onto the fun part, the build list.

Block 1.5 PR’s have been used in all branches military over the last several years, each unit and time period usually has them set up slightly differently. For this build, I wanted to try and emulate the 1.5’s seen in the 75th Ranger Regiment around the 2011-2013 time frame.

The upper is a military surplus Colt 14.5” with Gov profile barrel. These things can be tricky to get a hold of but any Colt made 14.5” upper will do.

Product Image for Colt 5.56 Complete Upper w/ 14.5" Barrel

$684

at Brownells

Prices accurate at time of writing

$684 at Brownells

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

The muzzle device is a SureFire 3 Prong Flash hider that is pinned onto the barrel. Thanks, NFA.

Product Image for SureFire 3 Prong Flash Hider

$52

at Brownells

Prices accurate at time of writing

$52 at Brownells

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

Now, for the time period I was basing this build on, a KAC NT4 is the correct mount. I do plan on acquiring an NT4 suppressor to cap this build off, but until then the SureFire RC2 will have to do.

surefire socom556 rc2 — SureFire SOCOM 5.56 RC2 in FDE

On the upper, I have a KAC RAS rail system and UTG tri-rail extension on the front sight post.

$250

at Optics Planet

Prices accurate at time of writing

$250 at Optics Planet

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

Again I had to cut a corner here. The Yankee Hill Machine tri-rail extension is what is correct for this build, but they have long since been discontinued and I have been unsuccessful at finding one.

$17

at Optics Planet

Prices accurate at time of writing

$17 at Optics Planet

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

The UTG is a total rip off of the YHM so it will work until I can source the original.

SOPMOD Rifle (2) — Different stock, also rocking the magnifier!

The lower is a complete Colt 6920 purchased from Brownells, with a B5 SOPMOD stock.

$90

at Brownells

Prices accurate at time of writing

$90 at Brownells

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

And that is it for the base rifle.

SOPMOD 1.5 Clone (4) — The Block plus the Glock

Minus accessories the base rifle was only $900 to assemble. The optic I chose for this build is a SU-231 marked EOTech 553. Unfortunately, EOTech has stopped all support for the 553, so once this optic breaks or dies there is no reviving it.

SOPMOD 1.5 Clone (3) — EOTech SU-231 553 Holographic Sight

The light is an M3X with an LED upgrade kit, again not accurate for this build but the stock incandescent M3X bulb is absolutely terrible. I’m pretty sure the stock bulb is so dim it actually makes the night darker. Lastly is the PEQ-15 IR laser and Insight dual switch.

$1,325

at Optics Planet

Prices accurate at time of writing

$1,325 at Optics Planet

Prices accurate at time of writing

Available Coupons

25% off all OAKLEY products – OAKLEY25
Copied! Visit Merchant

Definitely, an expensive accessory to have but worth it if you have any kind of night vision.

Parting Shots

Honestly, half the fun of cloning is hunting down all the parts and scouring the interwebs for reference pictures.

The accessories needed for most clone builds are not commercially available and sometimes require months of digging to find. If you are looking to start a clone build of your own the CRA facebook group is a great place to start. It is the largest clone group on Facebook and most members are happy to answer questions and point people in the right direction. Want to hear more about clone builds? Got a clone you want to show off? Let us know in the comments! If you’re looking for some awesome SWAG, take a look at MOE Guns Tactical! Need the best AR upgrades without enlisting? Take a look at our Best AR-15 Upgrades to get started!

2 Leave a Reply

tdick

Great article, thanks!

April 12, 2022 10:36 am

Dylan Beaird

Did you paint the Knights Armament rail? If so what did you use?

June 7, 2021 5:03 pm

What is the 1.5?

Build List

Parting Shots

2 Leave a Reply

Account in Pew Pew Tactical means more.