Search Results (15,425)

There are many existing buildings for which seismic rehabilitation interventions are required, especially in earthquake-prone areas like Italy. At the same time, the huge energy cost increase in Europe highlights the need for sustainable techniques that are able to increase the energy efficiency of buildings. These issues are even more significant for weak social groups living in social housing buildings, often in poor and vulnerable conditions. In order to address the solution regarding building renovations from the social, structural, and energy efficiency perspectives, in the framework of the Horizon Europe REHOUSE (Renovation packagEs for HOlistic improvement of EU’s bUildingS Efficiency, maximizing RES generation and cost-effectiveness) Project, this paper proposes an integrated methodology of building assessment that was tested on a social housing building in Margherita di Savoia, a small town of Apulia Region, Italy. In addition to the structural and energy aspects, the social one is particularly important since the building is located in the “Capitanata Area”, considered to be one of the most socially vulnerable areas in Italy. For this reason, an assessment methodology must consider reducing the overall impact of the assessment activities while explaining to tenants the purpose of the assessment and future renovation actions, maintaining the accuracy of the assessment results. Therefore, this study outlines an assessment methodology, demonstrated through its application to the case study building, that integrates the structural, energy, and social aspects, showing that the tenants’ involvement is also crucial for the technical evaluations. The final result is a low-impact approach for the building knowledge gathering needed to start a deep renovation intervention in social housing. Full article

One of the consequences of the globalisation of food markets is the effort enabling the control of food security and its origin. This might be traced by using different chemical composition analyses. However, for Central Europe, there is a lack of knowledge about the original reference values as well as their heterogeneity among the lands and countries. This study focused on characterizing the mineral profiles of apple tree fruits and comparing these profiles among different districts in Central Europe. The fruits of the apple cultivars ‘Gala’ and ‘Golden Delicious’ originated in the Czech Republic and Poland. The mineral and isotopic content of the apple fruit flesh was analysed using ICP-MS. The data were processed using the ANOVA test and compositely analysed using the PCA and LDA models. The results show relatively high variation in element distribution, particularly ⁸⁷Sr/⁸⁶Sr, Mn, Zn, Cu, Ca, P, and B, ranging between 20.6 and67.9% for both cultivars on average. However, their high variability within particular districts complicates the resolution of the LDA model. The reasons are linked to the geomorphological and pedological heterogeneity of the analysed districts as well as the particular sensitivity of the set of chosen primers to agronomic practices and tree performance. For this region, only partial separation among districts could be obtained by P, Ca, and Cu content, as well as the isotopic ratio of ¹⁰B/¹¹B. However, the resolution of the geographical discrimination needs to be improved by an enhanced set of primers, the use of more precise analytical techniques for the Sr isotopic ratio, or by multiple chemical analyses. Furthermore, the heterogeneity of the analysed districts could be tackled by more detailed analyses at the level of micro-regions. Full article

Background: Healthy nutrition is necessary for a good quality of life and reduction in the risk of developing diseases. Research indicates that students do not usually have healthy eating habits. Knowledge about nutrition, dietary guidelines, food groups and the nutrients they contain, the selection and adequate preparation of food, and the health consequences of unhealthy nutrition can influence the eating habits of students. Until recently, no research had been conducted on university-level students’ nutrition knowledge in Serbia. The aim of this study was to determine the nutrition knowledge of students from the University of Novi Sad (Vojvodina, Serbia) in relation to gender, year of study, academic field of study, and nutritional status. Methods: A cross-sectional study was conducted in the period from December 2021 to July 2022, on 898 students (72.9% female and 27.1% male, with an average age of 22.87 ± 3.092). An online survey questionnaire was used as the research instrument. An assessment of nutrition knowledge was performed using the General Nutrition Knowledge Questionnaire (GNKQ) for the following domains: dietary recommendations; food groups and the nutrients they contain; healthy food choices; and diet, disease and weight associations. Results: Significant differences in students’ assessed knowledge levels were determined across various domains of healthy nutrition. The highest level of nutrition knowledge was in healthy food choices, and the lowest was in understanding food groups and nutrient composition. The total determined knowledge about healthy nutrition correlated most with self-assessed knowledge of food groups, and least with knowledge of dietary recommendations. Female gender and higher years of study were associated with higher nutrition knowledge. Students from the Faculty of Medicine had the highest nutrition knowledge, followed by students from the Faculty of Technology and the Faculty of Science, compared to students from other faculties. Conclusions: Our findings highlight the need for targeted interventions aimed at improving students’ understanding of specific nutritional concepts, ultimately empowering them to make informed dietary decisions for lifelong health and wellbeing. Full article

Despite significant scientific and technological advancements in earthquake engineering, earthquakes continue to cause widespread destruction of the built environment, often resulting in numerous fatalities and substantial economic losses. Southeastern Europe, which includes Croatia, is part of the Mediterranean–Trans-Asian high-seismic activity zone. This area has recently experienced a series of earthquakes which had severe consequences for both populations and economies. Notably, the types of buildings that suffered significant damage or collapse during these events still constitute a large portion of the building stock across the region. The majority of residential buildings in Croatia and neighboring areas was constructed before the adoption of modern seismic standards, indicating that a considerable part of the building stock remains highly vulnerable to earthquakes. Therefore, the main goal of this study is to identify the building types which significantly contribute to seismic risk, with the focus on Zagreb as Croatia’s largest city and the capital; collect the documentation on the structural systems and occupancy; analyze the data; and carry out the initial vulnerability assessment. This serves as a first step toward developing a new exposure and vulnerability model for Zagreb that is also applicable to all urban areas in the region with similar building stock and seismotectonic conditions. Full article

Group A streptococcus (GAS) is the cause of both mild and invasive infections in humans with a high morbidity and mortality rate. The transmission of disease usually occurs via droplets, so the implementation of infection mitigation strategies (IMS) during the COVID-19 pandemic altered the incidence of GAS infection. This review aims to provide an overview of the influence of the COVID-19 pandemic on the incidence of GAS infection in children (invasive or non-invasive). A surge in the incidence of invasive GAS infection was noted in December 2022 after the reversal of IMS. A global uprise in GAS infection (invasive and non-invasive) was noted, especially concerning the pediatric population. Children younger than 5 years old were mostly affected, with complicated pneumonia being the leading clinical manifestation, causing many deaths worldwide. Emm1, specifically M1UK, was recognized as the dominant lineage in Europe and correlated with invasive disease. Healthcare professionals need to be alert about the severity of GAS-related infections, leading to early identification and treatment. Full article

Background: The objective was to analyze the budgets invested in prisons by the member states of the Council of Europe (CoE) and the relationships between the global cost, the cost incurred per single inmate, the number of inmates per 100,000 inhabitants (PPR), the gross domestic product (GDP) and per capita GDP. Methods: The data relating to the variables considered for the year 2020 were obtained from the SPACE-I 2021 of the CoE, the World Bank/OECD, and Eurostat. Regression models were used to evaluate the relationships between the PPR and the GDP, the daily cost per prisoner and per capita GDP, and between the PPR and the per capita GDP. A multiple correspondence analysis was performed to evaluate associations between the PPR, EU membership, cost per day, cost rate, geographical area, and inmate gender. Results: The daily expenditure per inmate in northern European countries reaches very high values, respectively: EUR 330.6 (Norway) and EUR 303 (Sweden), while, in the eastern countries, the values drop sharply (EUR 6.50 in Bulgaria and EUR 8.08 in Azerbaijani). The lowest PPR values are found in northern European countries, and the highest in the following countries: Russia, Turkey, Georgia, and Azerbaijan. Conclusions: Countries with a higher GDP per capita tend to have lower prison population rates and to invest larger amounts of funds for prison systems. Full article

In contemporary vehicle applications, lithium-ion batteries have become a leading option among the diverse array of battery technologies available. This preference is attributed to their advantageous properties, which include low self-discharge rates and no memory effect. Despite these benefits, lithium-ion batteries are not without their challenges. The key issues include a restricted driving range, concerns regarding longevity, safety risks, and prolonged charging durations. Efforts aimed at minimizing the charging duration frequently entail the introduction of elevated currents into the battery, a practice that can significantly elevate its temperature and, in turn, diminish its operational lifespan. Generally, battery packs in electric vehicles are equipped with flat cooling plates located on their side or bottom surfaces, which also serve the dual purpose of providing heating in colder conditions. Nevertheless, this cooling configuration faces difficulties during fast charging and may not efficiently heat or cool the batteries. In this work, a novel thermal management approach is proposed, in which a battery module is cooled not only with a bottom cooling plate but also using another cooling plate in contact with the busbars, located on the top of the battery module. The simulations and experimental tests show that this new configuration demonstrates significant improvements. The thermal time constant is reduced by 47%, enabling faster cooling of the module. Additionally, the maximum temperature reached by the battery during charging with dual cooling is lowered by 6 °C compared to the conventional approach. In this configuration, the top cooling plate acts as a thermal bridge. This is a key advantage that promotes temperature homogenization within the battery module. As a result, it supports an even aging process of batteries, ensuring their longevity and optimal performance. Full article

The global rise in population and advancement in civilization have led to a substantial increase in energy demand, particularly in the industrial sector. This sector accounts for a considerable proportion of total energy consumption, with approximately three-quarters of its energy consumption being used for heat processes. To meet the Paris Agreement goals, countries are aligning policies with international agreements, and companies are setting net-zero targets. Upstream emissions of the Scope 3 category refer to activities in the company’s supply chain, being crucial for achieving its net-zero ambitions. This study analyzes heating solutions for the supply chain of certain globally operating companies, contributing to their 2030 carbon-neutral ambition. The objective is to identify current and emerging heating solutions from carbon dioxide equivalent (CO₂e) impact, economic, and technical perspectives, considering regional aspects. The methodology includes qualitative and quantitative surveys to identify heating solutions and gather regional CO₂e emission factors and energy prices. Calculations estimate the CO₂e emissions and energy costs for each technology or fuel, considering each solution’s efficiency. The study focuses on Europe, the United States, Brazil, China, and Saudi Arabia, regions or countries representative of companies’ global supply chain setups. Results indicate that heat pumps are the optimal solution for low temperatures, while biomass is the second most prevalent solution, except in Saudi Arabia where natural gas is more feasible. For medium and high temperatures, natural gas is viable in the short term for Saudi Arabia and China, while biomass and electrification are beneficial for other regions. The proportion of electricity in the energy mix is expected to increase, but achieving decarbonization targets requires cleaner energy mixes or competitive Power Purchase Agreement (PPA) projects. Brazil, with its high proportion of renewable energy sources, offers favorable conditions for using green electricity to reduce emissions. The utilization of biomethane is promising if costs and incentives align with those in the EU. Although not the objective of this study, a comprehensive analysis of CAPEX and lifecycle costs associated with equipment is necessary when migrating technologies. Policies and economic incentives can also make these solutions more or less favorable. Full article

The dendrochronological parameters of 97 pedunculate oak (Quercus robur L.) trees including 20 plus trees (142-year-old on average) and four half-sib families for four of them were analyzed considering also specifically years of the most severe droughts that were identified using average monthly air temperature and precipitation data. The tree-ring width (TRW) was mostly affected by air temperature that had the largest cross-dating indices (CDI), up to 78% maximum. However, the 32-year Brückner–Egeson–Lockyer cycle (a climatic cycle of approximately 30–40 years that correlates with sunspot activity) was more reflected in the TRW dynamics in plus trees than precipitation and air temperature. A high-frequency of abnormal TRW was clearly observed during drought periods and in the following 2–3 years. Tree radial-growth reduction due to drought stress varied significantly between families. The resistance to drought based on TRW was higher in the maternal plus oak trees than in progeny. Drought resulted in reduced growth during the subsequent year(s); hence, the minimum growth occurred after the actual climate event. Autumn–winter precipitation and weather conditions were of the greatest importance at the onset of active vegetation in April and May. The influence of air temperature on oak growth was the largest in March (r = 0.39, p < 0.05). The strongest positive correlation between precipitation and growth (with r up to 0.38) was observed in May 2023. Plus trees had a high adaptive potential due to the stability of radial growth during drought with high resistance (Rt = 1.29) and resilience (Rs = 1.09) indexes. The offspring of families 1 (Rt = 0.89, Rs = 0.89) and 2 (Rt = 1.04, Rs = 0.87) had similar resistance and resilience, but the recovery indices (Rc) for offspring in families 1, 2 and 3 exceeded the recovery values for plus trees. For offspring in families 3 and 4, the index values were lower. The revealed responses of wood growth of plus trees to climatic parameters estimated as resistance (Rt), resilience (Rs) and recovery (Rc) indexes and similar responses in their progeny can be used in breeding pedunculate oak for wood growth productivity and drought resistance. Full article

Quasi-Linear Convective Systems (QLCSs) are a type of Mesoscale Convective System characterised by their linear shape and association with severe weather phenomena (such as hail, tornadoes, or wind gusts). This study deals with the application of a technique that consists of combinations of radar and lightning data to identify QLCS in Catalonia (the northeast region of the Iberian Peninsula) and the surrounding areas. Even with the limitation of reduced coverage, the technique has revealed efficiency in identifying the systems affecting the region of interest. Concretely, we have detected twenty cases for 2013–2023, significantly less than for other parts of Central Europe but similar to the global values for the whole continent and the United States of America. All cases occurred during the warm season and are divided into diurnal and nocturnal cases with different behaviours. Full article

Experimental results from 109 flush end-plate (FEP) connections were analyzed to investigate the failure modes and damage index of FEP connections across various damage states. The present study was conducted in accordance with the performance design objectives specified in China’s GB50011-2010 Code for Seismic Design of Buildings. The observed rotation angles and corresponding rotation factors were systematically categorized using a probabilistic statistical approach, with the 95% confidence lower limit as the primary constraint. The damage states of FEP connections were classified as virtually undamaged, lightly damaged, moderately damaged, severely damaged, and joint failure. A minimum plate thickness of 12 mm and a minimum high-strength bolt diameter of 20 mm are recommended to be used for the FEP connections, in accordance with building codes in China, the United States, and Europe. Quasi-static tests of six FEP connections were conducted to validate the damage-state categorization. The results revealed that for connections undergoing moderate and severe damage, the mean rotation factor deviated from the theoretical values proposed in this study by 3.7% and 9.4%, respectively. Therefore, the damage state of FEP connections can be reliably predicted based on different rotation angles using the damage-state categorization presented herein. Full article

Studies were initiated to find new effective fungicides to use under field conditions to discover novel approaches for optimizing disease management in sugar beet crops. Cercospora leaf spot (CLS), a prevalent foliar disease in sugar beet crops worldwide, is caused by the fungal pathogen Cercospora beticola Sacc. This disease has become the most prevalent pathogen in sugar beet crops across nearly all European growing regions, including Hungary. The epidemic spread of this disease can cause up to 50% yield loss. The use of fungicides has been a cornerstone in managing CLS of sugar beet due to the limited efficacy of non-chemical alternatives. However, the emergence of fungicide-resistant strains of Cercospora beticola Sacc. in recent decades has compromised the effectiveness of certain fungicides, particularly those belonging to the QoI (FRAC Group 11) and DMI (FRAC Group 3) classes. Hungary is among the many countries where resistance to these fungicides has developed due to their frequent application. Picolinamides represent a novel class of fungal respiration inhibitors targeting Complex III within the Quinoine-Inside Inhibitor (QiI) group. Two innovative fungicides from this class, fenpicoxamid and florylpicoxamid (both classified under FRAC Group 21), were evaluated for their efficacy in managing CLS of sugar beet in Hungary during the 2020 and 2021 growing seasons. Both fungicides were applied as formulated products at various application rates and demonstrated superior efficacy in controlling CLS compared to untreated control plots and the reference fungicides difenoconazole and epoxiconazole. The results consistently demonstrated that all tested application rates of fenpicoxamid and florylpicoxamid effectively controlled CLS in sugar beet, exhibiting a clear dose–response relationship. Disease severity, as measured by the area under the disease progress curve (AUDPC), was significantly correlated with yield reduction but showed no significant association with root sugar content. Moreover, data from both study years indicated that picolinamide fungicides applied at a rate of 75 g ai/ha significantly outperformed difenoconazole (100 g ai/ha) in controlling the CLS of sugar beet. Additionally, higher application rates of picolinamides at 100–150 g ai/ha outperformed epoxiconazole at 125 g ai/ha in disease suppression. Fenpicoxamid is currently registered for use in cereals within Europe, and outside of Europe in Banana against Black Sigatoka (eff. Mycosphaerella fijiensis). Florylpicoxamid, while not yet registered in Europe, is undergoing approval processes in various countries worldwide for a range of crops and is continually being evaluated for potential market introduction. Additional details regarding the efficacy of florylpicoxamid against CLS in sugar beet were presented at ‘The 10th International Conference on Agricultural and Biological Sciences (ABS 2024, Győr-Hungary)’ in 2024. Full article

Given the resistance of local communities to mineral extraction (“Not in My Back Yard” NIMBY), the energy transition and the new global economic model, which presupposes a sharp increase in the production of mineral raw materials, represent an opportunity for new approaches to mining. Considering that greenfield mines take years to be licensed and developed, the new attitudes should include the support and launch of policies and regulations that can enhance the growth of mining, realistic acceptance by non-governmental organisations (NGOs) that everything supporting our current way of life comes from Mother Earth, and responsible and fair treatment of local communities (systematic information from day one, strengthening community partnerships, granting offset benefits, etc.). Thus, BULGCOLD Inc. (TSXV: ZLTO) and its subsidiary, Stredne Slovensko s.r.o., which explores for metals in Bulgaria and Slovakia, are committed to having the Social License to Operate at the heart of their sustainable operations to alleviate the NIMBY effect. Full article

The man-made load on the environment and the decrease in biodiversity cause a direct negative environmental impact on the existence of honey bees and beekeeping products. The priority directions of the food industry are the use of high-quality environmentally friendly raw materials and the prevention of the ingress and formation of harmful substances in food products, including honey. This implies the need to develop methods for assessing the environmental safety of the studied raw materials and products. The purpose of this study was to implement a mathematical modeling method for studying the environmental safety of honey. Five types of honey were studied: Robinia, rapeseed, linden, buckwheat, and sunflower. Mathematical models were built according to the following parameters: total activity of β-emitting radionuclides; residues of levomycetin (chloramphenicol), nitrofuran (according to AOZ and AMOZ), metronidazole, and pesticides (according to hexachloran); and the content of water-insoluble substances (mechanical impurities) and heavy metals. On the basis of the obtained data and established quality criteria, calculation graphic models were built. Using algebraic methods, they derived new formulas for calculating quality coefficients. Multivariate analysis and programming methods were used to evaluate honey using mathematical modeling. The most and least ecologically dangerous contaminants and their share of influence for different types of honey were determined based on the complex of research on negative factors. The proposed mathematical models can be implemented for practical use in specialized laboratories as a tool for determining the environmental safety of honey of various botanical origins. Full article

This study focuses on the factors influencing consumers’ continuous participation willingness in online pre-sale activities. Based on perceived value and social exchange theory, it analyzes how perceived benefits (including practical benefits, hedonic benefits, and social benefits) and perceived costs (including search costs, waiting costs, and adjustment costs) affect consumer satisfaction and their continuous participation intention in online pre-sales. A total of 527 valid questionnaires were collected, and structural equation modeling was used for data analysis. The results indicate that perceived benefits are significantly positively correlated with consumer satisfaction and their willingness to continue participating, while perceived costs are significantly negatively correlated with both aspects. Additionally, the study found that product type moderates the effect of perceived benefits and perceived costs on consumer satisfaction. This research helps retailers understand consumers’ willingness to continuously participate in online pre-sales and provides valuable insights for developing pre-sale strategies. Full article