Nothing Special   »   [go: up one dir, main page]
Next Article in Journal
In Vitro Findings of Titanium Functionalized with Estradiol via Polydopamine Adlayer
Next Article in Special Issue
Optimization of Bicomponent Electrospun Fibers for Therapeutic Use: Post-Treatments to Improve Chemical and Biological Stability
Previous Article in Journal
Suitability of EGCG as a Means of Stabilizing a Porcine Osteochondral Xenograft
Previous Article in Special Issue
Dental Composite Formulation Design with Bioactivity on Protein Adsorption Combined with Crack-Healing Capability
You seem to have javascript disabled. Please note that many of the page functionalities won't work as expected without javascript enabled.
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
JFB
Volume 8
Issue 4
10.3390/jfb8040044
jfb-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Biodegradable Materials and Metallic Implants—A Review

by
Mythili Prakasam
1,*,†,
Janis Locs
2,†,
Kristine Salma-Ancane
2,†,
Dagnija Loca
2,†,
Alain Largeteau
1,† and
Liga Berzina-Cimdina
2,†
1
CNRS, Univ. Bordeaux, ICMCB, UPR 9048, F-33600 Pessac, France
2
Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka 3, LV-1007 Riga, Latvia
*
Author to whom correspondence should be addressed.
†
These authors contributed equally to this work.
J. Funct. Biomater. 2017, 8(4), 44; https://doi.org/10.3390/jfb8040044
Submission received: 26 July 2017 / Revised: 16 September 2017 / Accepted: 16 September 2017 / Published: 26 September 2017
(This article belongs to the Special Issue Journal of Functional Biomaterials: Feature Papers 2016)
Versions Notes

Abstract

:
Recent progress made in biomaterials and their clinical applications is well known. In the last five decades, great advances have been made in the field of biomaterials, including ceramics, glasses, polymers, composites, glass-ceramics and metal alloys. A variety of bioimplants are currently used in either one of the aforesaid forms. Some of these materials are designed to degrade or to be resorbed inside the body rather than removing the implant after its function is served. Many properties such as mechanical properties, non-toxicity, surface modification, degradation rate, biocompatibility, and corrosion rate and scaffold design are taken into consideration. The current review focuses on state-of-the-art biodegradable bioceramics, polymers, metal alloys and a few implants that employ bioresorbable/biodegradable materials. The essential functions, properties and their critical factors are discussed in detail, in addition to their challenges to be overcome.

1. Introduction

Significant advances in science and technology have contributed to various domains, including the medical field. Advances in the field of medical sciences and engineering have created the possibility to employ implants in the human body. Research and development as early as the 1890s, led to the development of pacemakers and defibrillators [1]. Implants appeasing the requirements for replacing/functioning/assisting the natural organs in the human body are called bioimplants. Biocompatibility and implants’ various roles to match the natural bodily functions are studied. Bioimplants [2] in today’s medical scenario are used as brain/neural implants [3], sensory implants [4], spinal implants [5], organ stimulation implants [6], subcutaneous implants [7], dental implants [8], cosmetic implants [9], convenience implants and other structural implants [10], such as stents, braces, rods, heart valves, bones, pins, hip prosthesis, eye, ear, skull implants and knee replacement implants. An upsurge in bioimplants markets is predicted to reach US$116 billion by 2020, primarily because of the rise in road accidents and trauma injuries. Similar demands are also analogous in the domain of cardiovascular, spinal and ophthalmic disorders, leading to a rise in the demand for bioimplants.
Bioimplants are protheses made for regularizing physiological functions, and bioceramics represent one classification of bioimplants based on material type. The classification of biomaterials [11] includes single crystals, polycrystals, glass, glass-ceramics, polymers and composites. The type of interaction and the mechanism of tissue attachment at the implant interface is based on its inherent nature. The type of tissue implant is considered (1) biotoxic if the surrounding tissue dies; (2) it is bioinert-nontoxic and biologically inactive; (3) it is bioactive-nontoxic and biologically active; and (4) bioresorbable/biodegradable-nontoxic and dissolves itself to replace the surrounding tissues. Forms and shapes of bioceramics [12] are available as dense, porous, bimodal and amorphous states. To avoid the complications of ceramics which are bioinert, the bioactive coating of hydroxyapatite (HAp) is used. Ceramic implants and resorbable/biodegradable bioceramics are the focus of this review. Resorbable bioceramics [13] are designed to gradually degrade in a time frame followed by a replacement of natural host tissue. Some of the complications related to resorbable bioceramics are maintaining strength and stability for its whole lifetime (until complete degradation, rate of resorption and the compositional changes in the body). Ideal bioactive [14] ceramics should be biocompatible, osteoconductive, osteoinductive, enable angiogenesis, biodegradable, nontoxic and have the flexibility to form different shapes. Bioceramics based on calcium phosphates (CP) with the mineral component similar to natural bone are a very well-known class of materials used for tissue engineering applications such as scaffolds.
Reconstructive surgery using interference screw fixations is prevalently employed in the femur and tibia [15]. Prior to this, bioresorbable implants and metallic biomaterials [16] were used. The disadvantages of metallic biomaterials are varied; for example, the requirement of postoperative complications, distortion of post-operative metallic screw and inflammatory reactions. Recent progress in development of bioresorbable implants for traumatology and sports injuries [17] is continuously evolving. However, there are still reports about the disadvantages of bioresorbable biomaterials, such as inflammation, osteolysis and the decrease in mechanical strength. Polymers [18] are used as bioresorbable materials for clinical applications for bone implants, sutures, and as drug delivery devices.
Biodegradable materials, irrespective of their constituent form, are expected to degrade progressively over a period of time to assist as scaffolds or for the healing process. Metals are stiff and have high mechanical strength in comparison to their polymer counterparts; hence, the former is usually chosen for medical applications. Magnesium [19] and iron [20] based biodegradable alloys are expected to degrade with the metabolism at an appropriate degradation rate inside the human body. Porous Mg alloy degrades rapidly in vivo. The main characteristics that are considered for porous metallic implants are porosity, pore size and pore interconnectivity, to cater for the replication of natural human-like implants. Higher porosity aids in angiogenesis. Bone is comprised of two distinct forms: one is porous (cancellous bone) and the other dense (cortical bone) [21]. Cancellous bone contains hemocytoblasts, proerythroblasts and bone marrow. Cancellous bone has a lower Youngs modulus and is more elastic compared to cortical bone. The porous structure consists of pore sizes in the range of 200–500 μm, and cancellous bone constitutes 30–90% of the porosity. The porosity content alters depending on the load, age and health state of the bone. Cortical bone is the outer layer of the bone that aids in providing the shape and form of the bone. Eighty percent of the skeleton is composed of cortical bone. Cortical bone stacks osteons or Harversian systems in the form of interstitial lamellae. In the case of loss of bone, bone grafting is used, and solutions are chosen based on the required biomechanical properties, chemical composition, bone mass and size of the defect site. Different types of bone grafting methods are employed [22]. A few of the bone grafting methods are autografting (cancellous/cortical bones), allograft (cancellous/demineralized bone matrix (DBM)) and bone graft substitutes (HAp/tricalcium phosphates Ca3(PO4)2(TCP)/biphasic calcium phosphates (BCP)/bioactive composites, growth factors).
The objective of this paper is to review the progress and development of biodegradable/bioresorbable biomaterials for various applications and their current challenges and future developments.

2. Bioresorbable Composites and Implants

2.1. Bioceramics

Scaffold design factors [23] in bone tissue engineering are given in Table 1. Biomaterials are considered as the alternative solution for natural bone with similar osteoinduction, osteoconduction, inflammation and mechanical integrity as native bone. Usage of bioceramics implants avoids the risk of disease transmission and immunogenicity. Bioceramics will experience humid conditions upon implantation. Currently, bioceramics are used for applications [24] related to dental, periodontal, cochlear, maxillofacial, spinal discs and otolaryngology. Initially, developed bioinert bioceramics were principally from zirconia (ZrO2) [25] and alumina (Al2O3) [26] to fabricate femoral heads of total hip arthroplasty prostheses. The aforesaid ceramics are well known for their good mechanical properties. Later, bioactive ceramics were developed and are currently widely known for their ability to form the bone bonding without causing inflammation. Calcium phosphates (CPs) [27] have high biocompatibility which led to studies on a variety of CPs. Some of the CPs based on hydroxyapatite (HAp, Ca10(PO4)6(OH)2), dicalcium phosphate dihydrate (DCPD, brushite, CaHPO4·2H2O) and tricalcium phosphate (TCP, Ca3(PO4)2) are extensively studied as bone replacement materials. β-TCP exhibits higher resorbability than HAp under physiological conditions. Bioceramics are commonly used for various applications such as fracture repair, bone defect filling and as bone replacement tissues. Degradable bioceramics [28] (Table 2) have a significantly lower mechanical strength in comparison to their non-resorbable counterparts. The physical and chemical composition of bioceramics determines their biological response. Bioactive ceramics also assist in the production of proteins and cell adhesion (osteoconduction) because of their presence of inorganic phase (CP). Bioceramics, with their capability of stimulating bone regeneration tissues, have led to a new class of biomaterials.
Tricalcium phosphate (TCP) [29] is known to have a close chemical composition similar to bone tissue mineral. TCP has two different crystalline forms: α-TCP and β-TCP. TCP has a good resorbability and bioactivity with a higher rate of biodegradation than hydroxyapatite under in vivo conditions [30]. Due to its osteoconductivity and resorption properties, it is widely used for bone graft remodeling. TCP is also used for the applications in orthopedic, dental and maxillofacial applications. Complete resorption of TCP is reported in the case of rat tibia and for cancellous bone reformation in canine models. Bone grafts made of TCP show a slow resorbability by osteoclasts over a span of 10 months to 2 years.
Calcium phosphate is the major inorganic component of bone tissue, with hydroxyapatite (HAp) having an atomic ratio of 1.67 for calcium and phosphate. HAp is bioactive and resorbable (when it is either in amorphous or low crystalline state). Natural and synthetic HAp reactivity varies based on the preparation method. Synthetic HAp prepared at high temperature yields high crystallinity. Biodegradation and resorbability of HAp are very slow. HAp bioceramics are commonly used for the small defects in the case of bone loss or in the case of fractures of the tibia, calcaneus and vertebra. HAp is not employed for load-bearing bone applications because of the poor mechanical properties. Currently, there is huge progress being made towards the development of HAp with improved mechanical and biological properties for tissue engineering. Metal ions such as strontium, magnesium and silicon are substituted in HAp, and have resulted in the improvement of biological and mechanical properties [31]. Zinc- [32] and manganese- [33] doped HAp has a quick resorption mechanism. Continuous research on the improvement of properties of HAp has shown a good response in terms of osteoconductivity and osteogenicity with future prospects to be employed as a bioactive delivery vehicle.
Dicalcium phosphates (DCP) [34] consist mainly of calcium phosphates and water, and are commonly used to alter the physical properties of the composition. A dehydrated form of DCP is known by the mineral name brushite, with the Ca/P ratio 1. DCP-based bioceramics are biodegradable. Brushite is known to convert into HAp in vivo or under physiological conditions that restricts its resorbability and degradation rate. Brushite is used for the treatment of fractures in tibial plates, distal metaphysis bone. Monetite (CaHPO4) bioceramics [35] are also reported for their applications in bone augmentation and regeneration for dental and orthopedic applications. The bioceramics [36,37,38,39,40,41] which are employed for the applications in hard tissue replacement are zirconia and alumina (and are also commonly employed in the fabrication of femoral heads).

2.2. Biodegradable Polymers

Natural-based [42] and synthetic based [43] polymer materials are some of the preferred choices for biodegradable materials. Polymers can be defined as macromolecules composed of covalently bonded monomers. Depending on the number of repeating monomers belonging to the same or different molecules, they can be classified as homopolymers and copolymers, respectively. Some of the known nature-based polymers are starch, chitosan, derivatives of hyaluronic acid, collagen, fibrin gels and silk. Practical applications of the aforesaid natural-based polymers are impeded by their low mechanical strength, unknown rate of degradation, repellency and high physiological activity. To overcome the challenges posed by natural polymers and in order to replicate them, synthetic polymers (Table 3) were studied with catered design of properties according to the requirements. Depending on the type of polymer chain arrangement—linear, branched, or cross-linked [44]—and its crystallinity/amorphous nature, the degradation rate can be altered. The glass transition temperature of polymers makes them flexible [45]; hence, it is necessary to make polymers biodegradable above normal body temperature. Some of the commonly used biodegradable polymers [46] are polyglycolic acid (PGA), polylactic acid (PLA), poly-β-hydroxybutyrate (PHB), poly (lactic acid-co-glycolic acid) (PLGA) and poly-ε-caprolactone (PCL). Among these polymers, PLA, PGA and PLGA are used for degradable sutures. PLA was the earliest reported polymer used for sutures [47]. PLA was synthesized from natural sources such as starch and corns. Crystalline PLA (L-PLA) is less resistant to hydrolysis than amorphous PLA (DL-PLA) [48]. PGA, a synthetic polymer, has high crystallinity, low solubility and high degradation rate (because of hydrophilism). The high degradation rate of PGA results in the decrease of its mechanical strength after implantation [49]. PCL, an aliphatic polyester, although difficult to control its degradation rate, is widely used in medical implants. PCL is usually employed in the case of long-term implants and as a drug delivery system owing to its crystallinity and permeability, respectively. PCL also has high flexibility and shaping options to form different shapes. PHB is another type of biodegradable polymer with high crystallinity and is used as a model for physical properties of polymers [50]. However, due to the brittleness of PHB, it is not employed for practical applications, but is blended with other polymers to study their miscibility and crystallization properties. Poly-para-dioxanone (PPD) [51] is another biodegradable polymer which is commonly used for its biodegradability, resorbability, compatibility, and its flexibility as a medical implant. PPD is used as fracture internal fixation material and in the form of films, foams, molded products and coatings. Studies have shown the possibility of complete disintegration of PPD implants within 6–7 months after implantation by varying the molecular weight, crystallinity and their melting temperature [52].
The choice of biodegradable polymers is chosen based on the required properties, such as their chemical, physical and mechanical properties. PLA, classified on the basis of its stereoisomers such as poly (l-lactide) acid (PLLA) and poly (d-lactide) acid (PDLA) [53], is influenced by their constituent polymer chains which determine PLA’s characteristics. The degradation of the polymers is through hydrolysis of ester bonds resulting in alteration of their chemical structure. When the surface of the polymer is attracted by the microorganism, the enzymes secreted by the microorganism converted the macromolecules into tiny molecular debris and eventually converted them into CO2 and H2O. A physical biodegradation process occurs as the microorganisms interact with the surface of the polymers, resulting in hydrolysis (which is a chemical process) to ionize and convert them into oligomer debris. However, chemical biodegradation occurs due to the enzymatic interaction of the microorganism with polymers leading to conversion into CO2 and H2O. However, it has to be noted that all the biodegradation processes of all the polymers do not follow the same methodology, and the complex process of biodegradation is studied extensively by various research groups [54,55,56].
Implants for bone repair and other load bearing implants require high mechanical strength; hence, ceramics and metals are preferred. However, in some cases, counter-effects such as inflammation [57], corrosion [58] and bone loss [59] are observed. Hence, polymers are considered for bone repair applications [60] owing to their tensile strength, elastic modulus and non-corrosion properties. It has to be noted that polymers also experience a loss of mechanical strength with the increase in implantation time as a result of degradation/resorbability. Currently, polymers such as PGA, PLA and PLGA are widely employed for bone implants. Other fields of applications include screws, bone fixation objects, anklebones, patella and other fixing objects. Some disadvantages of these polymers involve X-ray transparency, unidentified influences of foreign body interactions and decreased mechanical strength with time. Other types of polymers such as collagen, hyaluronan and fibrin glue are also degraded enzymatically through collagenase, hyaluronidase and plasmin, respectively.
Cyanoacrylates [73] are known to be super glues or instant adhesives in surgery. The mechanism of degradation appears to involve base-catalyzed unzipping from the chain terminus, followed by re-equilibrium of the chains. The degradation decreases adhesive bond strength on heating and poor resistance to prolonged contact with water [74]. More intensive research is currently being carried out on polymers.

2.3. Magnesium Alloys

From the biomedical point of view, magnesium alloys with appropriate mechanical properties and biodegradation are necessary, as well as their biosafety in terms of toxicity. Magnesium alloys are used for tissue engineering, orthopedic and cardiovascular applications. Nan Li et al. [75] reported on the novel magnesium alloys developed for biomedical applications. Witte et al. [76] investigated in vivo corrosion of different types of magnesium alloys and reported that an accumulation of biological calcium phosphates and all related alloys displayed a better osteointegration. The mechanical properties of magnesium alloys are increased by alloying with aluminium [77] and rare earth elements [78]. However, owing to the neurotoxicity due to the accumulation of aluminium [79] and hepatotoxicity of rare earth materials [80], the advantage of increasing mechanical properties of Magnesium alloys cannot be used for biomedical applications. There is extensive research pointed in this direction to identify the new magnesium alloys with nontoxicity or low toxicity [81]. Various biomedical magnesium alloys such as Mg–Zn-based [82], Mg–Ca-based [83], Mg–Si-based, Mg–Sr-based and Mg–rare earth alloy-based are studied extensively [84] by various research groups for the development of biodegradable magnesium alloys. Rapid corrosion [85] of pure magnesium is well-known, but with the increase of purity by purification, the corrosion rate is reduced to a large extent. The common impurities found in magnesium are Fe, Cu and Ni [86]. The corrosion rate of magnesium is highly dependent on the ratio of impurities present in it. Pure magnesium cannot be an apt material for applications in orthopedics because of their mechanical properties. Coarsening of magnesium grains [87] is caused by their heat treatments such as forging or rolling. Calcium (Ca) is used for grain refining in magnesium alloys [88]. The solubility limit of Ca in Mg matric is only 1.34 wt %. There are also reports on the increase of coarse grains in Mg–Ca alloys in the case of increase in Ca [89]. Rapid solidification [90] of Mg–Ca alloys yielded fine grains that had superior corrosion resistance and improved cell activity. Degradation [91] of Mg–Ca alloys was reported over a period of 3 months following the bone formation. Zinc (Zn) also forms alloys with Mg through which the improvement of mechanical properties of Mg–Zn alloys can be achieved. Other than binary Mg–Zn alloys [92], ternary and quaternary alloys of Mg–Zn with Zr, Y, Mn and Ca are formed [93]. A binary alloy of Mg–6Zn [94] is resistant to galvanic corrosion due to its single phase formation; in vitro cytotoxicity tests indicated that it has good biocompatibility properties; in vivo tests proved that it is not harmful to the internal organs [95]. However, the bio corrosion was slightly higher in the case of in vivo conditions than in the in vitro conditions. The biodegradation of Mg–Zn alloy was rather average with around 2 mm/year while used as alloy rods in rabbit femur shafts; adding Y in the binary alloy of Mg–Zn aids to diminish the corrosion rate. On the other hand, the addition of Zr in the binary alloy of Mg–Zn helps in grain refinement, and at the same time helps to increase the osteointegration properties superior to titanium alloys. Adding the intermetallic group of metals such as manganese (Mn) to Mg–Zn can contribute to the corrosion-resistive properties and subsequently remove heavy metals such as Fe. The degradation of Mg–Zn–Mn alloy is highly dependent on the individual constituent of each component in the alloy. The alloy compound of Mg–Zn–Ca [96,97] has superior mechanical and corrosion properties when Zn content is <4 wt %, even under in vivo conditions. Other alloys of Mg with Zn, Ca and Si and Sr are also prevalent. The aforesaid were found to contribute primarily to the refinement of grains and change of grain morphology, which assists in corrosion resistance. Although rare earth elements were added as dopants, the toxicity of the rare earth elements is well known. Hence, rare earth elements are not yet employed as implant materials. In the current state-of-the-art [98], magnesium-based alloys cannot be used for orthopedic applications due to their high degradation rate. Concerning the corrosion rate, magnesium alloys based on Mg–Mn–Zn and Mg–Ca have a low in vivo corrosion rate. The mechanical strength of these Mg-based alloys is increased through the change in their structural properties because of their biocompatible properties. The fabrication methodology [99] through powder metallurgy, melt-casting and spin melting, is used for the fabrication of magnesium alloys and magnesium-based metal composites. Another strategy employed for controlling the degradation rate of magnesium alloys is through coating their surfaces with calcium phosphate [100], fluorinated coatings, polymer coatings, etc. Magnesium-based implants are currently used as micro clips for laryngeal microsurgery, orthopedic and cardiovascular systems. There are further developments in this domain of developing magnesium alloys. The common challenge in magnesium alloys is their formation of hydrogen. Magnesium glasses are considered as an alternative for crystalline alloys to avoid the formation of the hydrogen bubble effect [101]. During the manufacturing process of magnesium alloys, their influence on the implant surface with controllable properties is required for controlling the degradation and corrosion process.

2.4. Titanium Alloys

Titanium, being one of the low-density elements, is one of the materials used for biomedical applications [102]. The strengthening process of a titanium alloy is done either by alloying or deformation processing [103]. Ti alloys were favored as biomaterials because of their good biocompatibility [104], corrosion resistance [105] and lower modulus [106]. Ti alloys such as α + β Ti–6Al–4V and metastable β alloys are currently being investigated [107]. Pure titanium undergoes a transformation temperature from α phase to β phase at ~885 °C. The transition temperature is influenced by the interstitial elements such as, O.; N, C, B and H and various other substantial elements. The microstructure and properties of Ti alloys vary depending on the type of interstitial/substitutional element chosen [108]. Many substitutional metals such as, V.; Mo, Nb, Cr, Fe, Si, Ta, Cu, Ni, Pd, Co, M, and W are used as additives to stabilize the β phase. Titanium alloys have considerably superior biocompatibility compared to their other counterparts due to their excellent corrosion resistance. In comparison to Ti–6Al–4V, β-titanium alloys with stabilizing elements (Mo, Ta and Zr) are considered to be safe. Β–titanium alloys have a modulus closer to that of bone. However, the fatigue strength is poor compared to other α–β alloys. The fatigue strength of these alloys was enhanced by the addition of Y2O3, SiO2 and ZrO2 which causes dispersion; hence, strengthening the alloys. Ti alloys require surface modifications to increase their wear resistance. Titanium alloys form easy bonding with bone, demonstrating good integration with bone tissue. Currently, pure Ti alloys are used in pacemaker cases, ventricular devices, implantable drug pumps, screws and staples in spinal surgery, dental implants and in craniofacial implants. Ti–6Al–4V alloys are used for dental implants, hip, knee, wrist, spine, shoulder, elbow and orthodontics. However, there is a long-term risk associated because of the release of Al and V that causes Alzheimer’s, osteomalacia and other neurological conditions. Currently, Vanadium free Ti–6Al–7Nb and Ti–5Al–2.5 Fe are being developed [109] and used in femoral prosthesis stems, fracture plates, nails, rods, screws and wires. Titanium alloys cause allergic tissue reactions because of fretting, and have relatively less wear resistance in comparison to other alloys used. Because of the poor bending properties of α–β titanium alloys, Ti–Mo–Zr–Fe [110] was used instead for total hip replacement prostheses. Titanium alloy’s wear resistance is improved by addition of refractory metal elements and by surface modification techniques [111]. The application of Ti alloys for implant materials is impeded by their poor mechanical strength.

2.5. Orthopedic Implants

Orthopedic implants is the term representing implants that replace a missing joint or any damaged bone. Orthopedic implants represent a large part of the implants made in the field of medical implants. Orthopedic implants are mostly composed of chromium, cobalt, molybdenum, nickel, titanium and zirconium alloys. The disadvantages of metallic orthopedic implants such as metal allergy, metal implant failure, and complications related to joint replacement are reported. Other serious complications of orthopedic implants include device failure, pain, metallic staining of the surrounding tissue, muscular necrosis, periprosthetic fibrosis and loosening of prosthesis. Orthopedic implants used for total hip arthroplasty (THA) and total knee arthroplasty (TKA) metal allergy and device failure are reported. Metallic orthopedic implants failure results in pain, instability, malrotation, and local pain leading to infection. Wendy et al. reported on the metal hypersensitivity reactions to orthopedic implants [112]. Other orthopedic implants also include bone screw with self-tapping threads used as fastening elements in prosthetics. Steel and titanium screws are used prevalently for fabrication of bone screws. Recently, there has been progress made in the direction of better performance of bone screws leading to the study of magnesium (Mg) and Mg-coated screws. Recently, Ullrich et al. [113] reported on the bone screw with minimum risk of fracture with miniaturization, by reducing the friction on the surface of the screw implant. This was achieved by means of surface functionalization, self-tapping and self-lubricating thread profile by incorporating some bioactive materials to accelerate bone growth/healing. By improving the tapping efficiency of the abrasives, friction is minimized during the screwing-in process. The mass and size of the implant is reduced which will reduce patient rehabilitation time; this also opens avenues for resorbable implants such as in the skull and small limb field.

2.6. Metals Used in Knee Replacement

Many different types of metallic systems are used for knee replacement. Steel has higher stiffness than the cortical bone with an elastic modulus of 200 GPa [114]. Stiff steel implants bare all the load, and thus weaken the normal bone. Hence, bone cement is used as an interface to decrease the stress shielding effect [115]. Fixing of stiff steel implants is usually carried out with the help of bone cement. Most commonly used steels are cheaper than other types of metals. In medical fields, the commonly used iron alloys are of low carbon alloyed, chromium (17–20%), molybdenum (2–4%) and nickel (12–14%), with the addition of other small amounts of other elements. The corrosion resistance of these metals is under intensive investigations [116] as release of these metal ions inside the body could cause allergy, toxicity and other symptoms. The release of iron from stainless steel favors bacteria infections by acting as an iron source for their proliferation [117]. To avoid these inconveniences, stainless steel implants are used in the body as short-term implants or as coated implants. Recently, cobalt- and titanium-based materials were used as joint replacement materials. The fabrication methodology and the microstructural defects lead to fatigue-based fracture. Good fatigue resistance of approximately 400 MPa is considered necessary for total hip implants to last a long time [118]. Fatigue resistance is diminished by wear, corrosion and material defects. Steel has an elastic modulus of approximately 200 GPa and titanium has an elastic modulus of approximately 110 GPa. Hence, while using the titanium-based alloys, cement used as an intermediate layer is not considered important. To ensure fixation, porous-coated implants are used. Hydroxyapatite is commonly used as a coating material. In total joint arthroplasty, aseptic loosening is the prime cause of failure. Stainless steel knee implants were reported to have an 80–90% success rate, even after 25 years of implantation [119]. Radiographic loosening was inferred in few cases of cobalt–chrome alloys. As a cementless implant, the surface finish governs the osseointegration potential.

2.7. Orthodontic Wire

Orthodontic brackets and wires are widely used in cases of a long span of treatments. Researchers are investigating new types of archwires to minimize the discomfort caused [120]. Various materials such as nickel titanium, beta titanium, copper and stainless steel are currently used. Different shapes and forms (such as square, round, rectangular and beveled surfaces) of orthodontic archwires [121] are used. There was continuous evolution between the archwire and the bracket to reduce the friction significantly. Heat-activated multimodulus wire, due to its increased flexibility, minimizes angular friction. Nickel titanium (NiTi) wires [122] with added resiliency and varying heat activation variation is considered mostly by dentists, whereas the overstressing of the NiTi wire causes permanent distortion. To reduce the wire surface friction, surface coatings are employed on NiTi wires. Beta titanium wire appears to be the intermediate wire between NiTi wires and stainless steel, with twice the flexibility and half the force of stainless steel. Another material, copper NiTi, is reported to be more resistant to permanent distortion than other nickel titanium wires [123]. Various materials in the following classifications such as noble metal alloys, stainless archwires, cobalt–chromium archwire, nickel titantium archwire, copper nickel titanium alloy and beta titanium archwire are used for archwires. However, detailed information on these materials is not given here as they are out of the scope of the present review article. Biodegradable metals are also used as metallic stents. Biodegradable metals are used for treating coronary artery diseases. Mg, Fe and Zn are widely used for biomedical applications. Mg–6Zn alloys, Zn, Fe and Co–Cr stents are biocompatible, but the latter two have less degradation time.

3. Conclusions

Bioresorbable/biodegradable composites and ceramic implants are of growing interest because of their ability to provide a necessary mechanical function for the tissue reconstruction process after the designated function in the body. These bioresorbable materials should degrade at a tolerable range for the body and an optimized degradation rate is required based on the function that the material serves in the body. There are not enough human in vivo data to validate the biodegradability of bioresorbable materials. This inhibits the valorization of the materials for marketing purposes. There are many challenges, such as faster than expected degeneration of the mechanical properties of Mg-based alloys during the tissue remodeling process. Surface coatings and modifications are suggested as an alternative to achieve the extended mechanical integrity of these materials. More research has to be focused on materials such as Mg-based and Fe-based alloys to determine their mechanical and degradation kinetics. The biosafety of the degrading material should be ensured with the host tissue and implant interface. Various other parameters such as age, physical condition, risk of infection, and type of fracture are primordial for the choice of the required bioresorbable composites and ceramic implants. Currently, biodegradable/bioresorbable polymers are successfully used for biomedical and pharmaceutical applications. Polymers such as PCL, PGA and PLA are used for craniomaxillofacial fixation, sutures, interference screws, fixation plates and pins and for meniscal repair. However, the degradation rates of these polymers are not well controlled; they lack mechanical strength and induce inflammation reactions in the acidic medium. To date, few metallic polymer composites such as Mg/PCL have demonstrated compressive moduli similar to human cancellous bone, in addition to their excellent cytocompatibility and osteoblastic differentiation properties. In the current state-of-the-art, biodegradable/bioresorbable composites still require much fundamental research and development for use in bioimplants. Metals have to be selected carefully to avoid metal-related toxicity in the body and to avoid corrosion in the body. There are many other factors to be considered such as the influence of the pH change on adjacent tissue and the metabolic activity in supplementary phases. In the present scenario, magnesium-based implants have good future prospects for development.

Acknowledgments

This work has been supported by the European Social Fund within the project “Involvement of new scientist group for synergistic investigation to development of nanostructured composite materials for bone tissue regeneration”, No. 2013/0007/1DP/1.1.1.2.0/13/APIA/VIAA/024.

Author Contributions

All the authors contributed equally to the present review article.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Elmqvist, R. Cardiac Pacemakers and Defibrillators. Acta Anaesthesiol. Scand. 1962, 6, 95–98. [Google Scholar] [CrossRef]
  2. Soler-Botija, C.; Bagó, J.R.; Llucià-Valldeperas, A.; Vallés-Lluch, A.; Castells-Sala, C.; Martínez-Ramos, C.; Fernández-Muiños, T.; Chachques, J.C.; Pradas, M.M.; Semino, C.E.; et al. Engineered 3D bioimplants using elastomeric scaffold, self-assembling peptide hydrogel, and adipose tissue-derived progenitor cells for cardiac regeneration. Am. J. Transl. Res. 2014, 6, 291. [Google Scholar] [PubMed]
  3. Takmakov, P.; Ruda, K.; Phillips, K.S.; Isayeva, I.S.; Krauthamer, V.; Welle, C.G. Rapid evaluation of the durability of cortical neural implants using accelerated aging with reactive oxygen species. J. Neural Eng. 2015, 12, 026003. [Google Scholar] [CrossRef] [PubMed]
  4. Huang, Y.; Van Dessel, J.; Martens, W.; Lambrichts, I.; Zhong, W.J.; Ma, G.W.; Lin, D.; Liang, X.; Jacobs, R. Sensory innervation around immediately vs. delayed loaded implants: A pilot study. Int. J. Oral Sci. 2015, 7, 49. [Google Scholar] [CrossRef] [PubMed]
  5. Bagga, C.; Erbe, E.M.; Murphy, J.P.; Freid, J.M.; Pomrink, G.J. Bioactive Spinal Implants and Method of Manufacture Thereof. U.S. Patent 8,715,353, 6 May 2014. [Google Scholar]
  6. Oka, Y.; Ye, M.; Zuker, C.S. Thirst driving and suppressing signals encoded by distinct neural populations in the brain. Nature 2015, 520, 349. [Google Scholar] [CrossRef] [PubMed]
  7. Guo, R.; Merkel, A.R.; Sterling, J.A.; Davidson, J.M.; Guelcher, S.A. Substrate modulus of 3D-printed scaffolds regulates the regenerative response in subcutaneous implants through the macrophage phenotype and Wnt signaling. Biomaterials 2015, 73, 85–95. [Google Scholar] [CrossRef] [PubMed]
  8. Klein, M.O.; Schiegnitz, E.; Al-Nawas, B. Systematic review on success of narrow-diameter dental implants. Int. J. Oral Maxillofac. Implants 2014, 29, 43–54. [Google Scholar] [CrossRef] [PubMed]
  9. Yahyavi-Firouz-Abadi, N.; Menias, C.O.; Bhalla, S.; Siegel, C.; Gayer, G.; Katz, D.S. Imaging of cosmetic plastic procedures and implants in the body and their potential complications. Am. J. Roentgenol. 2015, 204, 707–715. [Google Scholar] [CrossRef] [PubMed]
  10. Silva, V.V.; Domingues, R.Z.; Lameiras, F.S. Microstructural and mechanical study of zirconia-hydroxyapatite (ZH) composite ceramics for biomedical applications. Compos. Sci. Technol. 2001, 61, 301–310. [Google Scholar] [CrossRef]
  11. Shackelford, J.F. Bioceramics—Current status and future trends. Mater. Sci. Forum 1999, 293, 99. [Google Scholar] [CrossRef]
  12. Hench, L.L.; Wilson, J. An Introduction to Bioceramics, 2nd ed.; World Scientific: Singapore, 1993. [Google Scholar]
  13. Shikinami, Y.; Okuno, M. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-l-lactide (PLLA): Part I. Basic characteristics. Biomaterials 1999, 20, 859–877. [Google Scholar] [CrossRef]
  14. Cao, W.; Hench, L.L. Bioactive materials. Ceram. Int. 1996, 22, 493–507. [Google Scholar] [CrossRef]
  15. Harilainen, A.; Linko, E.; Sandelin, J. Randomized prospective study of ACL reconstruction with interference screw fixation in patellar tendon autografts versus femoral metal plate suspension and tibial post fixation in hamstring tendon autografts: 5-year clinical and radiological follow-up results. Knee Surg. Sports Traumatol. Arthrosc. 2006, 14, 517–528. [Google Scholar] [PubMed]
  16. Okazaki, Y.; Gotoh, E. Comparison of metal release from various metallic biomaterials in vitro. Biomaterials 2005, 26, 11–21. [Google Scholar] [CrossRef] [PubMed]
  17. Weiler, A.; Hoffmann, R.F.; Stähelin, A.C.; Helling, H.J.; Südkamp, N.P. Biodegradable implants in sports medicine: The biological base. Arthrosc. J. Arthrosc. Relat. Surg. 2000, 16, 305–321. [Google Scholar] [CrossRef]
  18. Vert, M. Degradable and bioresorbable polymers in surgery and in pharmacology: Beliefs and facts. J. Mater. Sci. Mater. Med. 2009, 20, 437–446. [Google Scholar] [CrossRef] [PubMed]
  19. Chen, Y.; Xu, Z.; Smith, C.; Sankar, J. Recent advances on the development of magnesium alloys for biodegradable implants. Acta Biomater. 2014, 10, 4561–4573. [Google Scholar] [CrossRef] [PubMed]
  20. Schinhammer, M.; Hänzi, A.C.; Löffler, J.F.; Uggowitzer, P.J. Design strategy for biodegradable Fe-based alloys for medical applications. Acta Biomater. 2010, 6, 1705–1713. [Google Scholar] [CrossRef] [PubMed]
  21. Zioupos, P.; Cook, R.B.; Hutchinson, J.R. Some basic relationships between density values in cancellous and cortical bone. J. Biomech. 2008, 41, 1961–1968. [Google Scholar] [CrossRef] [PubMed]
  22. Finkemeier, C.G. Bone-grafting and bone-graft substitutes. JBJS 2002, 84, 454–464. [Google Scholar] [CrossRef]
  23. Hutmacher, D.W. Scaffold design and fabrication technologies for engineering tissues—State of the art and future perspectives. J. Biomater. Sci. Polym. Ed. 2001, 12, 107–124. [Google Scholar] [CrossRef] [PubMed]
  24. LeGeros, R.Z.; Lin, S.; Rohanizadeh, R.; Mijares, D.; LeGeros, J.P. Biphasic calcium phosphate bioceramics: Preparation, properties and applications. J. Mater. Sci. Mater. Med. 2003, 14, 201–209. [Google Scholar] [CrossRef] [PubMed]
  25. Lohbauer, U.; Zipperle, M.; Rischka, K.; Petschelt, A.; Müller, F.A. Hydroxylation of dental zirconia surfaces: Characterization and bonding potential. J. Biomed. Mater. Res. Part B Appl. Biomater. 2008, 87, 461–467. [Google Scholar] [CrossRef] [PubMed]
  26. Wittenbrink, I.; Hausmann, A.; Schickle, K.; Lauria, I.; Davtalab, R.; Foss, M.; Keller, A.; Fischer, H. Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells. Biomaterials 2015, 62, 58–65. [Google Scholar] [CrossRef] [PubMed]
  27. Bohner, M. Calcium orthophosphates in medicine: From ceramics to calcium phosphate cements. Injury 2000, 31, D37–D47. [Google Scholar] [CrossRef]
  28. De Groot, K. Clinical applications of calcium phosphate biomaterials: A review. Ceram. Int. 1993, 19, 363–366. [Google Scholar] [CrossRef]
  29. Knaack, D.; Goad, M.E.; Aiolova, M.; Rey, C.; Tofighi, A.; Chakravarthy, P.; Lee, D.D. Resorbable calcium phosphate bone substitute. J. Biomed. Mater. Res. Part A 1998, 43, 399–409. [Google Scholar] [CrossRef]
  30. Teramoto, H.; Kawai, A.; Sugihara, S.; Yoshida, A.; Inoue, H. Resorption of apatite-wollastonite containing glass-ceramic and beta-tricalcium phosphate in vivo. Acta Med. Okayama 2005, 59, 201–207. [Google Scholar] [PubMed]
  31. Boanini, E.; Gazzano, M.; Bigi, A. Ionic substitutions in calcium phosphates synthesized at low temperature. Acta Biomater. 2010, 6, 1882–1894. [Google Scholar] [CrossRef] [PubMed]
  32. Thian, E.S.; Konishi, T.; Kawanobe, Y.; Lim, P.N.; Choong, C.; Ho, B.; Aizawa, M. Zinc-substituted hydroxyapatite: A biomaterial with enhanced bioactivity and antibacterial properties. J. Mater. Sci. Mater. Med. 2013, 24, 437–445. [Google Scholar] [CrossRef] [PubMed]
  33. Mayer, I.; Jacobsohn, O.; Niazov, T.; Werckmann, J.; Iliescu, M.; Richard-Plouet, M.; Burghaus, O.; Reinen, D. Manganese in precipitated hydroxyapatites. Eur. J. Inorg. Chem. 2003, 2003, 1445–1451. [Google Scholar] [CrossRef]
  34. Gbureck, U.; Hölzel, T.; Klammert, U.; Würzler, K.; Müller, F.A.; Barralet, J.E. Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing. Adv. Funct. Mater. 2007, 17, 3940–3945. [Google Scholar] [CrossRef]
  35. Tamimi, F.; Le Nihouannen, D.; Eimar, H.; Sheikh, Z.; Komarova, S.; Barralet, J. The effect of autoclaving on the physical and biological properties of dicalcium phosphate dihydrate bioceramics: Brushite vs. monetite. Acta Biomater. 2012, 8, 3161–3169. [Google Scholar] [CrossRef] [PubMed]
  36. Arcos, D.; Vallet-Regí, M. Bioceramics for drug delivery. Acta Mater. 2013, 61, 890–911. [Google Scholar] [CrossRef]
  37. Lind, M.; Overgaard, S.; Nguyen, T.; Ongpipattanakul, B.; Bunger, C.; Søballe, K. Transforming growth factor-6 stimulates bone ongrowth: Hydroxyapatite-coated implants studied in dogs. Acta Orthop. Scand. 1996, 67, 611–616. [Google Scholar] [CrossRef] [PubMed]
  38. Meseguer-Olmo, L.; Ros-Nicolás, M.J.; Vicente-Ortega, V.; Alcaraz-Baños, M.; Clavel-Sainz, M.; Arcos, D.; Ragel, C.V.; Vallet-Regí, M.; Meseguer-Ortiz, C. A bioactive sol-gel glass implant for in vivo gentamicin release. Experimental model in Rabbit. J. Orthop. Res. 2006, 24, 454–460. [Google Scholar] [CrossRef] [PubMed]
  39. Fan, J.; Lei, J.; Yu, C.; Tu, B.; Zhao, D. Hard-templating synthesis of a novel rod-like nanoporous calcium phosphate bioceramics and their capacity as antibiotic carriers. Mater. Chem. Phys. 2007, 103, 489–493. [Google Scholar] [CrossRef]
  40. Solberg, B.D.; Gutow, A.P.; Baumgaertner, M.R. Efficacy of gentamycin-impregnated resorbable hydroxyapatite cement in treating osteomyelitis in a rat model. J. Orthop. Trauma 1999, 13, 102–106. [Google Scholar] [CrossRef] [PubMed]
  41. Ferna, E.; Gil, F.J.; Ginebra, M.P.; Driessens, F.C.; Planell, J.A.; Best, S.M. Calcium phosphate bone cements for clinical applications. Part I: Solution chemistry. J. Mater. Sci. Mater. Med. 1999, 10, 169–176. [Google Scholar]
  42. Chiellini, E.; Solaro, R. Biodegradable polymeric materials. Adv. Mater. 1996, 8, 305–313. [Google Scholar] [CrossRef]
  43. Gunatillake, P.A.; Adhikari, R. Biodegradable synthetic polymers for tissue engineering. Eur. Cell Mater. 2003, 5, 1–6. [Google Scholar] [CrossRef] [PubMed]
  44. He, S.; Yaszemski, M.J.; Yasko, A.W.; Engel, P.S.; Mikos, A.G. Injectable biodegradable polymer composites based on poly (propylene fumarate) crosslinked with poly (ethylene glycol)-dimethacrylate. Biomaterials 2000, 21, 2389–2394. [Google Scholar] [CrossRef]
  45. Lodge, T.P.; McLeish, T.C. Self-concentrations and effective glass transition temperatures in polymer blends. Macromolecules 2000, 33, 5278–5284. [Google Scholar] [CrossRef]
  46. Hollinger, J.O.; Battistone, G.C. Biodegradable bone repair materials: Synthetic polymers and ceramics. Clin. Orthop. Relat. Res. 1986, 207, 290–305. [Google Scholar] [CrossRef]
  47. Middleton, J.C.; Tipton, A.J. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 2000, 21, 2335–2346. [Google Scholar] [CrossRef]
  48. Karst, D.; Yang, Y. Molecular modeling study of the resistance of PLA to hydrolysis based on the blending of PLLA and PDLA. Polymer 2006, 47, 4845–4850. [Google Scholar] [CrossRef]
  49. Sung, H.J.; Meredith, C.; Johnson, C.; Galis, Z.S. The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis. Biomaterials 2004, 25, 5735–5742. [Google Scholar] [CrossRef] [PubMed]
  50. Piskin, E. Biodegradable polymers as biomaterials. J. Biomater. Sci. Polym. Ed. 1995, 6, 775–795. [Google Scholar] [CrossRef] [PubMed]
  51. Pezzin, A.P.; Ekenstein, V.; Alberda, G.O.; Zavaglia, C.A.; Ten Brinke, G.; Duek, E.A. Poly (para-dioxanone) and poly (l-lactic acid) blends: Thermal, mechanical, and morphological properties. J. Appl. Polym. Sci. 2003, 88, 2744–2755. [Google Scholar] [CrossRef]
  52. Tan, L.; Yu, X.; Wan, P.; Yang, K. Biodegradable materials for bone repairs: A review. J. Mater. Sci. Technol. 2013, 29, 503–513. [Google Scholar] [CrossRef]
  53. Maurus, P.B.; Kaeding, C.C. Bioabsorbable Implant Material Review. Oper. Tech. Sports Med. 2004, 12, 158–160. [Google Scholar] [CrossRef]
  54. David, C.; De Kesel, C.; Lefebvre, F.; Weiland, M. The biodegradation of polymers: Recent results. Macromol. Mater. Eng. 1994, 216, 21–35. [Google Scholar]
  55. Premraj, R.; Doble, M. Biodegradation of polymers. Indian J. Biotechnol. 2005, 4, 186–193. [Google Scholar]
  56. Shtilman, M.I. Biodegradation of Polymers. Journal of Siberian Federal University. Biology 2015, 8, 113–130. Available online: https://search.proquest.com/openview/515648718449c0747817226c563ea85c/1?pq-origsite=gscholar&cbl=2035025 (accessed on 25 September 2017).
  57. Broggini, N.; McManus, L.M.; Hermann, J.S.; Medina, R.; Schenk, R.K.; Buser, D.; Cochran, D.L. Peri-implant inflammation defined by the implant-abutment interface. J. Dent. Res. 2006, 85, 473–478. [Google Scholar] [CrossRef] [PubMed]
  58. Witte, F.; Hort, N.; Vogt, C.; Cohen, S.; Kainer, K.U.; Willumeit, R.; Feyerabend, F. Degradable biomaterials based on magnesium corrosion. Curr. Opin. Solid State Mater. Sci. 2008, 12, 63–72. [Google Scholar] [CrossRef]
  59. Cappiello, M.; Luongo, R.; Di Iorio, D.; Bugea, C.; Cocchetto, R.; Celletti, R. Evaluation of peri-implant bone loss around platform-switched implants. Int. J. Periodontics Restor. Dent. 2008, 28, 347–355. [Google Scholar]
  60. Sheikh, Z.; Najeeb, S.; Khurshid, Z.; Verma, V.; Rashid, H.; Glogauer, M. Biodegradable materials for bone repair and tissue engineering applications. Materials 2015, 8, 5744–5794. [Google Scholar] [CrossRef] [PubMed]
  61. Barkan, Y.; Levinman, M.; Veprinsky-Zuzuliya, I.; Tsach, T.; Merqioul, E.; Blum, G.; Domb, A.J.; Basu, A. Comparative evaluation of polycyanoacrylates. Acta Biomater. 2017, 48, 390–400. [Google Scholar] [CrossRef] [PubMed]
  62. Mateo, J.M.; Sumera, F.C. In Vitro Controlled Drug Release of Anticancer Drugs Deguelin and Cisplatin by Lauric Acid Derived Polyanhydride as Carrier. Philipp. J. Sci. 2016, 145, 215–223. [Google Scholar]
  63. Svobodová, J.; Proks, V.; Karabiyik, Ö.; Çalıkoğlu Koyuncu, A.C.; Torun Köse, G.; Rypáček, F.; Studenovská, H. Poly (amino acid)-based fibrous scaffolds modified with surface-pendant peptides for cartilage tissue engineering. J. Tissue Eng. Regen. Med. 2017, 11, 831–842. [Google Scholar] [CrossRef] [PubMed]
  64. Hou, L.D.; Li, Z.; Pan, Y.; Sabir, M.; Zheng, Y.F.; Li, L. A review on biodegradable materials for cardiovascular stent application. Front. Mater. Sci. 2016, 10, 238–259. [Google Scholar] [CrossRef]
  65. Baillargeon, A.L.; Mequanint, K. Biodegradable polyphosphazene biomaterials for tissue engineering and delivery of therapeutics. BioMed Res. Int. 2014, 2014. Available online: https://www.hindawi.com/journals/bmri/2014/761373/ (accessed on 20 September 2017). [CrossRef] [PubMed]
  66. Diez-Pascual, A.M. Tissue Engineering Bionanocomposites Based on Poly (propylene fumarate). Polymers 2017, 9, 260. [Google Scholar] [CrossRef]
  67. Tyler, B.; Gullotti, D.; Mangraviti, A.; Utsuki, T.; Brem, H. Polylactic acid (PLA) controlled delivery carriers for biomedical applications. Adv. Drug Deliv. Rev. 2016, 107, 163–175. [Google Scholar] [CrossRef] [PubMed]
  68. Gentile, P.; Chiono, V.; Carmagnola, I.; Hatton, P.V. An overview of poly (lactic-co-glycolic) acid (PLGA)-based biomaterials for bone tissue engineering. Int. J. Mol. Sci. 2014, 15, 3640–3659. [Google Scholar] [CrossRef] [PubMed]
  69. Barouti, G.; Jaffredo, C.G.; Guillaume, S.M. Advances in drug delivery systems based on synthetic poly (hydroxybutyrate)(co) polymers. Prog. Polym. Sci. 2017, 73, 1–31. [Google Scholar] [CrossRef]
  70. Chen, Q.; Li, W.; Goudouri, O.M.; Ding, Y.; Cabanas-Polo, S.; Boccaccini, A.R. Electrophoretic deposition of antibiotic loaded PHBV microsphere-alginate composite coating with controlled delivery potential. Coll. Surf. B Biointerfaces 2015, 130, 199–206. [Google Scholar] [CrossRef] [PubMed]
  71. Canbolat, M.F.; Celebioglu, A.; Uyar, T. Drug delivery system based on cyclodextrin-naproxen inclusion complex incorporated in electrospun polycaprolactone nanofibers. Coll. Surf. B Biointerfaces 2014, 115, 15–21. [Google Scholar] [CrossRef] [PubMed]
  72. Justinger, C.; Slotta, J.E.; Ningel, S.; Gräber, S.; Kollmar, O.; Schilling, M.K. Surgical-site infection after abdominal wall closure with triclosan-impregnated polydioxanone sutures: Results of a randomized clinical pathway facilitated trial (NCT00998907). Surgery 2013, 154, 589–595. [Google Scholar] [CrossRef] [PubMed]
  73. Almeida, J.I.; Javier, J.J.; Mackay, E.; Bautista, C.; Proebstle, T.M. First human use of cyanoacrylate adhesive for treatment of saphenous vein incompetence. J. Vasc. Surg. Venous Lymphat. Disord. 2013, 1, 174–180. [Google Scholar] [CrossRef] [PubMed]
  74. Robello, D.R.; Eldridge, T.D.; Swanson, M.T. Degradation and Stabilization of Polycyanoacrylates. J. Polym. Sci. Part A Polym. Chem. 1999, 37, 4570–4581. [Google Scholar] [CrossRef]
  75. Li, N.; Zheng, Y. Novel Magnesium alloys developed for biomedical application: A review. J. Mater. Sci. Technol. 2013, 29, 489–502. [Google Scholar] [CrossRef]
  76. Witte, F.; Fischer, J.; Nellesen, J.; Crostack, H.A.; Kaese, V.; Pisch, A.; Beckmann, F.; Windhagen, H. In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials 2006, 27, 1013–1018. [Google Scholar] [CrossRef] [PubMed]
  77. Tang, A.; Pan, F.; Yang, M.; Cheng, R. Mechanical properties and microstructure of magnesium-aluminum based alloys containing strontium. Mater. Trans. 2008, 49, 1203–1211. [Google Scholar] [CrossRef]
  78. Tekumalla, S.; Seetharaman, S.; Almajid, A.; Gupta, M. Mechanical Properties of Magnesium-Rare Earth Alloy Systems: A Review. Metals 2015, 5, 1–39. [Google Scholar] [CrossRef]
  79. Taïr, K.; Kharoubi, O.; Taïr, O.A.; Hellal, N.; Benyettou, I.; Aoues, A. Aluminium-induced acute neurotoxicity in rats: Treatment with aqueous extract of Arthrophytum (Hammada scoparia). J. Acute Dis. 2016, 5, 470–482. [Google Scholar] [CrossRef]
  80. Wang, X.; Ni, J.; Cao, N.; Yu, S.; Chen, Y.; Zhang, S.; Gu, B.; Yan, J. In vivo evaluation of Mg–6Zn and titanium alloys on collagen metabolism in the healing of intestinal anastomosis. Sci. Rep. 2017, 7, 44919. [Google Scholar] [CrossRef] [PubMed]
  81. Gu, X.-N.; Zheng, Y.-F. A review on magnesium alloys as biodegradable materials. Front. Mater. Sci. China 2010, 4, 111–115. [Google Scholar] [CrossRef]
  82. Gao, X.; Nie, J.F. Characterization of strengthening precipitate phases in a Mg–Zn alloy. Scr. Mater. 2007, 56, 645–648. [Google Scholar] [CrossRef]
  83. Li, Z.; Gu, X.; Lou, S.; Zheng, Y. The development of binary Mg–Ca alloys for use as biodegradable materials within bone. Biomaterials 2008, 29, 1329–1344. [Google Scholar] [CrossRef] [PubMed]
  84. Zhang, E.; Yang, L.; Xu, J.; Chen, H. Microstructure, mechanical properties and bio-corrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application. Acta Biomater. 2010, 6, 1756–1762. [Google Scholar] [CrossRef] [PubMed]
  85. Song, G.; Atrens, A. Understanding magnesium corrosion—A framework for improved alloy performance. Adv. Eng. Mater. 2003, 5, 837–858. [Google Scholar] [CrossRef]
  86. Song, G.L.; Atrens, A. Corrosion mechanisms of magnesium alloys. Adv. Eng. Mater. 1999, 1, 11–33. [Google Scholar] [CrossRef]
  87. Ali, Y.; Qiu, D.; Jiang, B.; Pan, F.; Zhang, M.X. Current research progress in grain refinement of cast magnesium alloys: A review article. J. Alloys Compd. 2015, 619, 639–651. [Google Scholar] [CrossRef]
  88. Lee, Y.C.; Dahle, A.K.; StJohn, D.H. Grain refinement of Magnesium. In Essential Readings in Magnesium Technology; Springer: Berlin, Germany, 2016; pp. 247–254. [Google Scholar]
  89. Wang, W.; Han, J.; Yang, X.; Li, M.; Wan, P.; Tan, L.; Zhang, Y.; Yang, K. Novel biocompatible magnesium alloys design with nutrient alloying elements Si, Ca and Sr: Structure and properties characterization. Mater. Sci. Eng. B 2016, 214, 26–36. [Google Scholar] [CrossRef]
  90. He, C.; Bin, S.; Wu, P.; Gao, C.; Feng, P.; Yang, Y.; Liu, L.; Zhou, Y.; Zhao, M.; Yang, S.; et al. Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy. Metals 2017, 7, 105. [Google Scholar] [CrossRef]
  91. Lee, J.W.; Han, H.S.; Han, K.J.; Park, J.; Jeon, H.; Ok, M.R.; Seok, H.K.; Ahn, J.P.; Lee, K.E.; Lee, D.H.; et al. Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy. Proc. Natl. Acad. Sci. USA 2016, 113, 716–721. [Google Scholar] [CrossRef] [PubMed]
  92. Zhang, S.; Zhang, X.; Zhao, C.; Li, J.; Song, Y.; Xie, C.; Tao, H.; Zhang, Y.; He, Y.; Jiang, Y.; et al. Research on an Mg–Zn alloy as a degradable biomaterial. Acta Biomater. 2010, 6, 626–640. [Google Scholar] [CrossRef] [PubMed]
  93. Wang, J.; Zhang, J.; Zong, X.; Xu, C.; You, Z.; Nie, K. Effects of Ca on the formation of LPSO phase and mechanical properties of Mg-Zn-Y-Mn alloy. Mater. Sci. Eng. A 2015, 648, 37–40. [Google Scholar] [CrossRef]
  94. Wang, J.; Tang, J.; Zhang, P.; Li, Y.; Wang, J.; Lai, Y.; Qin, L. Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: A general review. J. Biomed. Mater. Res. Part B Appl. Biomater. 2012, 100, 1691–1701. [Google Scholar] [CrossRef] [PubMed]
  95. He, Y.; Tao, H.; Zhang, Y.; Jiang, Y.; Zhang, S.; Zhao, C.; Li, J.; Zhang, B.; Song, Y.; Zhang, X. Biocompatibility of bio-Mg-Zn alloy within bone with heart, liver, kidney and spleen. Chin. Sci. Bull. 2009, 54, 484–491. [Google Scholar] [CrossRef]
  96. Hofstetter, J.; Becker, M.; Martinelli, E.; Weinberg, A.M.; Mingler, B.; Kilian, H.; Pogatscher, S.; Uggowitzer, P.J.; Loffler, J.F. High strength low alloy (HSLA) Mg-Zn-Ca alloys with excellent biodegradation performance. JOM 2014, 66, 566–572. [Google Scholar] [CrossRef]
  97. Hofstetter, J.; Martinelli, E.; Weinburg, A.M.; Becker, M.; Mingler, B.; Uggowitzer, J.; Loffler, J.F. Assessing the degradation performance of ultrahigh-purity magnesium in vitro ad in vivo. Corros. Sci. 2015, 91, 29–36. [Google Scholar] [CrossRef]
  98. Agarwal, S.; Curtin, J.; Duffy, B.; Jaiswal, S. Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications. Mater. Sci. Eng. C 2016, 68, 948–963. [Google Scholar] [CrossRef] [PubMed]
  99. Xu, Z.; Smith, C.; Chen, S.; Sankar, J. Development and microstructural characterizations of Mg-Zn-Ca alloys for biomedical applications. Mater.Sci. Eng. B 2011, 176, 1660–1665. [Google Scholar] [CrossRef]
  100. Dorozhkin, S.V. Calcium orthophosphate coatings on magnesium and its biodegradable alloys. Acta Biomater. 2014, 10, 2919–2934. [Google Scholar] [CrossRef] [PubMed]
  101. Yang, Y.; Scenini, F.; Curioni, M. A study on magnesium corrosion by real-time imaging and electrochemical methods: Relationship between local processes and hydrogen evolution. Electrochim. Acta 2016, 198, 174–184. [Google Scholar] [CrossRef]
  102. Kulkarni, M.; Mazare, A.; Gongadze, E.; Perutkova, Š.; Kralj-Igli, V.; Milošev, I.; Schmuki, P.; Igli, A.; Mozeti, M. Titanium nanostructures for biomedical applications. Nanotechnology 2015, 26, 062002. [Google Scholar] [CrossRef] [PubMed]
  103. Kwasniak, P.; Garbacz, H.; Kurzydlowski, K.J. Solid solution strengthening of hexagonal titanium alloys: Restoring forces and stacking faults calculated from first principles. Acta Mater. 2016, 102, 304–314. [Google Scholar] [CrossRef]
  104. Kopova, I.; Stráský, J.; Harcuba, P.; Landa, M.; Janeček, M.; Bačákova, L. Newly developed Ti–Nb–Zr–Ta–Si–Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility. Mater. Sci. Eng. C 2016, 60, 230–238. [Google Scholar] [CrossRef] [PubMed]
  105. Wang, S.; Liu, Y.; Zhang, C.; Liao, Z.; Liu, W. The improvement of wettability, biotribological behavior and corrosion resistance of titanium alloy pretreated by thermal oxidation. Tribol. Int. 2014, 79, 174–182. [Google Scholar] [CrossRef]
  106. Mohammed, M.T.; Khan, Z.A.; Siddiquee, A.N. Beta titanium alloys: The lowest elastic modulus for biomedical applications: A review. Int. J. Chem. Mol. Nucl. Mater. Metall. Eng. 2014, 8, 788–793. [Google Scholar]
  107. Barriobero-Vila, P.; Gussone, J.; Haubrich, J.; Sandlöbes, S.; Da Silva, J.C.; Cloetens, P.; Schell, N.; Requena, G. Inducing Stable α + β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments. Materials 2017, 10, 268. [Google Scholar] [CrossRef] [PubMed]
  108. Li, Y.; Yang, C.; Zhao, H.; Qu, S.; Li, X.; Li, Y. New developments of Ti-based alloys for biomedical applications. Materials 2014, 7, 1709–1800. [Google Scholar] [CrossRef] [PubMed]
  109. Gepreel, M.A.; Niinomi, M. Biocompatibility of Ti-alloys for long-term implantation. J. Mech. Behav. Biomed. Mater. 2013, 20, 407–415. [Google Scholar] [CrossRef] [PubMed]
  110. Nnamchi, P.S.; Obayi, C.S.; Todd, I.; Rainforth, M.W. Mechanical and electrochemical characterisation of new Ti–Mo–Nb–Zr alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 2016, 60, 68–77. [Google Scholar] [CrossRef] [PubMed]
  111. Mohammed, M.T.; Khan, Z.A.; Siddiquee, A.N. Surface modifications of titanium materials for developing corrosion behavior in human body environment: A review. Procedia Mater. Sci. 2014, 6, 1610–1618. [Google Scholar] [CrossRef]
  112. Teo, W.Z.W.; Schalock, P.C. Metal Hypersensitivity Reactions to Orthopedic Implants. Dermatol. Ther. 2017, 7, 53–64. [Google Scholar] [CrossRef] [PubMed]
  113. Bayer, U.; Lootz, D. Orthopedic Implants, Particularly Bone Screws, and Methods for Producing Same. U.S. Patent Application No. 15/059,553, 9 September 2016. [Google Scholar]
  114. Daniels, A.U.; Chang, M.K.; Andriano, K.P.; Heller, J. Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone. J. Appl. Biomater. 1990, 1, 57–78. [Google Scholar] [CrossRef] [PubMed]
  115. Nagels, J.; Stokdijk, M.; Rozing, P.M. Stress shielding and bone resorption in shoulder arthroplasty. J. Shoulder Elb. Surg. 2003, 12, 35–39. [Google Scholar] [CrossRef] [PubMed]
  116. Bagherifard, S.; Hickey, D.J.; de Luca, A.C.; Malheiro, V.N.; Markaki, A.E.; Guagliano, M.; Webster, T.J. The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel. Biomaterials 2015, 73, 185–197. [Google Scholar] [CrossRef] [PubMed]
  117. Cramers, M.; Lucht, U. Metal sensitivity in patients treated for tibial fractures with plates of stainless steel. Acta Orthop. Scand. 1977, 48, 245–249. [Google Scholar] [CrossRef] [PubMed]
  118. Albrektsson, T.; Brånemark, P.I.; Hansson, H.A.; Lindström, J. Osseointegrated titanium implants: Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta Orthop. Scand. 1981, 52, 155–170. [Google Scholar] [CrossRef] [PubMed]
  119. Zimmerli, W. Clinical presentation and treatment of orthopaedic implant-associated infection. J. Intern. Med. 2014, 276, 111–119. [Google Scholar] [CrossRef] [PubMed]
  120. Yap, J.; Walsh, L.J.; Din, N.U.; Ngo, H.; Manton, D.J. Evaluation of a novel approach in the prevention of white spot lesions around orthodontic brackets. Aust. Dent. J. 2014, 59, 70–80. [Google Scholar] [CrossRef] [PubMed]
  121. Bellini, H.; Moyano, J.; Gil, J.; Puigdollers, A. Comparison of the superelasticity of different nickel–titanium orthodontic archwires and the loss of their properties by heat treatment. J. Mater. Sci. Mater. Med. 2016, 27, 158. [Google Scholar] [CrossRef] [PubMed]
  122. Scattina, A.; Alovisi, M.; Paolino, D.S.; Pasqualini, D.; Scotti, N.; Chiandussi, G.; Berutti, E. Prediction of Cyclic Fatigue Life of Nickel-Titanium Rotary Files by Virtual Modeling and Finite Elements Analysis. J. Endod. 2015, 41, 1867–1870. [Google Scholar] [CrossRef] [PubMed]
  123. Ravi Shantharaj, M.D.; Panchali Batra, M.D.; Pradeep Subbiah, M.D.; Lakshmi, B. Total Recall: An Update On Orthodontic Wires. Int. J. Orthod. 2014, 25, 47–56. [Google Scholar]
Table
Table 1. Scaffold characteristics and requirements.
Table 1. Scaffold characteristics and requirements.
Scaffold CharacteristicsRequirements
Biocompatibility
Biodegradation/bioresorbability		Non-toxicity to the host tissue, support normal cellular activity, osteoconductive, osteoinductive and osteogenic, angiogenesis
A controlled resorption rate to host new bone tissue. Possibility to vary the degradation rate, controlled rate of drug delivery and incorporate biomolecules
Pore size and shapeMinimum pore size of 100 µm for diffusion of nutrients, cell survival and proliferation. To enable bone tissue in-growth, pore sizes in the range of 200–350 µm are required. Multiscale porosity with a combination of micro and macro pores allows cell growth, but may be detrimental in terms of mechanical strength
Mechanical propertiesCapability to withstand mechanical stress and loading. Scaffold possibility to have good mechanical properties and to mimic as a natural body component
Table
Table 2. Influencing parameters of biodegradation.
Table 2. Influencing parameters of biodegradation.
ScaffoldFabrication methodology
Size/shape
Pore size and porosity
surface roughness
surface area to volume ratio
Additives or impurities
In vitro factorspH/ionic strength
cell type and density
Mechanical loads
Incubation temperature
Biological medium’s composition
In vivo factorsTissue modelling and remodeling
Mechanical loads
Enzyme concentrations
Implantation site
Table
Table 3. Synthetic degradable polymers and applications.
Table 3. Synthetic degradable polymers and applications.
Synthetic Degradable PolymersApplications
Polycyanoacrylates [61]Adhesives, drug delivery
Polyanhydrides [62]Drug delivery
Poly(amino acids) [63]Drug delivery, tissue engineering, orthopedic applications
Poly(ortho ester) [64]Drug delivery, Stents
Polyphosphazenes [65]Blood contacting devices, drug delivery, skeletal reconstruction
Poly(propylene fumarate) [66]Orthopedic applications
Polylactic acid (PLA) [67], poly glycolic (PGA) [68] and copolymersBarrier membranes, drug delivery, guided tissue regeneration (in dental applications), orthopedic applications, stents, staples, sutures, tissue engineering
Polyhydroxybutyrate (PHB) [69], polyhydroxyvalerate (PHV) [70], and copolymersLong-term drug delivery, orthopedic applications, stapes stents
Polycaprolactone [71]Long-term drug delivery, orthopedic applications, staples, stents
Polydioxanone [72]Fracture fixation in non-load-bearing bones, sutures, wound clip

Share and Cite

MDPI and ACS Style

Prakasam, M.; Locs, J.; Salma-Ancane, K.; Loca, D.; Largeteau, A.; Berzina-Cimdina, L. Biodegradable Materials and Metallic Implants—A Review. J. Funct. Biomater. 2017, 8, 44. https://doi.org/10.3390/jfb8040044

AMA Style

Prakasam M, Locs J, Salma-Ancane K, Loca D, Largeteau A, Berzina-Cimdina L. Biodegradable Materials and Metallic Implants—A Review. Journal of Functional Biomaterials. 2017; 8(4):44. https://doi.org/10.3390/jfb8040044

Chicago/Turabian Style

Prakasam, Mythili, Janis Locs, Kristine Salma-Ancane, Dagnija Loca, Alain Largeteau, and Liga Berzina-Cimdina. 2017. "Biodegradable Materials and Metallic Implants—A Review" Journal of Functional Biomaterials 8, no. 4: 44. https://doi.org/10.3390/jfb8040044

APA Style

Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017). Biodegradable Materials and Metallic Implants—A Review. Journal of Functional Biomaterials, 8(4), 44. https://doi.org/10.3390/jfb8040044

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop