Nothing Special   »   [go: up one dir, main page]
Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

interfacing uln2003 and relay to drive a high power sirern

Status
Not open for further replies.
W

wajbharath

Newbie level 2
Newbie level 2
Joined
Jul 23, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
india
Activity points
1,291
uln2003

hi

i want to drive a high power buzzer of 12v from 8051 using uln2003 and relay ckt,
can any one suggest me how do i hav to connect the circuit.
please help its urgent.
 

uln2003 relay

simple.

8051 (port pin) -----> ULN2003 (input pin)

ULN2003 (output pin) -----> Relay (- side)

Relay(+ side) ------> 12V

Also connect the ground of the 2003 to 0V (the same 0V as the 8051) and
the clamp pin of the 2003 (pin 9) to 12V.

The ULN2003 has several identical driver circuits, whichever you choose, use the appropriate input and output pins.

If the buzzer runs on 12V, you might be able to drive it directly from the 2003 and leave the relay out.

Brian.
 

    W

    wajbharath

    Points: 2
    Helpful Answer Positive Rating
uln 2003 relay

hi

thank u very much, i got it working :)
i really appreciate ur help and advice.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top