Nothing Special   »   [go: up one dir, main page]

To read this content please select one of the options below:

MoDeT: a low-cost obstacle tracker for self-driving mobile robot navigation using 2D-laser scan

Toan Van Nguyen (Department of Electrical and Information Engineering, Seoul National University of Science and Technology, Seoul, Republic of Korea and Robotics R&D Center, Syscon, Incheon, Republic of Korea)
Minh Hoang Do (Robotics R&D Center, Syscon, Incheon, Republic of Korea)
Jaewon Jo (Robotics R&D Center, Syscon, Incheon, Republic of Korea)

Industrial Robot

ISSN: 0143-991X

Article publication date: 7 February 2022

Issue publication date: 20 September 2022

317

Abstract

Purpose

Collision avoidance is considered as a crucial issue in mobile robotic navigation to guarantee the safety of robots as well as working surroundings, especially for humans. Therefore, the position and velocity of obstacles appearing in the working space of the self-driving mobile robot should be observed to help the robot predict the collision and choose traversable directions. This paper aims to propose a new approach for obstacle tracking, dubbed MoDeT.

Design/methodology/approach

First, all long lines, such as walls, are extracted from the 2D-laser scan and considered as static obstacles (or mapped obstacles). Second, a density-based procedure is implemented to cluster nonwall obstacles. These clusters are then geometrically fitted as ellipses. Finally, the combination of Kalman filter and global nearest-neighbor (GNN) method is used to track obstacles’ position and velocity.

Findings

The proposed method (MoDeT) is experimentally verified by using an autonomous mobile robot (AMR) named AMR SR300. The MoDeT is found to provide better performance in comparison with previous methods for self-driving mobile robots.

Research limitations/implications

The robot can only see a part of the object, depending on the light detection and ranging scan view. As a consequence, geometrical features of the obstacle are sometimes changed, especially when the robot is moving fast.

Practical implications

This proposed method is to serve the navigation and path planning for the AMR.

Originality/value

(a) Proposing an extended weighted line extractor, (b) proposing a density-based obstacle detection and (c) implementing a combination of methods [in (a) and (b) constant acceleration Kalman and GNN] to obtain obstacles’ properties.

Keywords

Acknowledgements

This research was financially supported by Syscon, Incheon, South Korea. In developments and experiments, Syscon supported working environments, AMR, and also other equipment. And we also gratefully appreciate our colleagues in Syscon for their cooperation in this research.

Disclosure statement: No potential conflict of interest was reported by the author(s).

Citation

Nguyen, T.V., Do, M.H. and Jo, J. (2022), "MoDeT: a low-cost obstacle tracker for self-driving mobile robot navigation using 2D-laser scan", Industrial Robot, Vol. 49 No. 6, pp. 1032-1041. https://doi.org/10.1108/IR-12-2021-0289

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles