Nothing Special   »   [go: up one dir, main page]

Redirected from page "lms1xx"

Clear message

  Show EOL distros: 

Package Summary

Driver for SICK LMS1xx.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Package Summary

The lms1xx package contains a basic ROS driver for the SICK LMS1xx line of LIDARs.

Supported Hardware

This package should work with Sick LMS 1xx laser range finders.

Note that this package has been released by Clearpath Robotics as lms1xx. You can install it on Ubuntu using apt:

sudo apt-get install ros-$ROS_DISTRO-lms1xx

Nodes

LMS100

LMS100 is a ROS node for libLMS1xx.

Published Topics

scan (sensor_msgs/LaserScan)
  • Scan data from the laser.

Parameters

~host (string, default: 192.168.1.2)
  • The device hostname or IP address.
~frame_id (string, default: laser)
  • The laser data frame. This frame should be at the optical center of the laser, with the x-axis along the zero degree ray, and the y-axis along the pi/2 degree ray.

Wiki: LMS1xx (last edited 2015-05-21 15:03:14 by MikePurvis)