Nothing Special   »   [go: up one dir, main page]
SlideShare a Scribd company logo

Lm358

•
•
G
gustavodiazcam

The document describes dual operational amplifiers - the LM2904, LM358/LM358A, and LM258/LM258A. These devices consist of two independent op-amps designed to operate from a single power supply over a wide voltage range of 3V to 32V. They feature high gain, frequency compensation, and can source or sink output currents up to 30mA. The document provides detailed specifications, electrical characteristics, typical performance curves, and mechanical dimensions of the 8-pin DIP package for the devices.

1 of 13
Downloaded 14 times
www.fairchildsemi.com LM2904,LM358/LM358A,LM258/ LM258A Dual Operational Amplifier Features Description • Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain: 100dB • Wide Power Supply Range: LM258/LM258A, LM358/LM358A: 3V~32V (or ±1.5V ~ 16V) LM2904 : 3V~26V (or ±1.5V ~ 13V) • Input Common Mode Voltage Range Includes Ground • Large Output Voltage Swing: 0V DC to Vcc -1.5V DC • Power Drain Suitable for Battery Operation. The LM2904,LM358/LM358A, LM258/LM258A consist of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltage. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifier, DC gain blocks and all the conventional OP-AMP circuits which now can be easily implemented in single power supply systems. 8-DIP 1 8-SOP 1 Internal Block Diagram OUT1 1 IN1 (-) 2 IN1 (+) 3 GND 4 8 7 OUT2 + VCC - 6 IN2 (-) + 5 IN2 (+) Rev. 1.0.2 ©2002 Fairchild Semiconductor Corporation
LM2904,LM358/LM358A,LM258/LM258A Schematic Diagram (One section only) VCC Q5 Q12 Q6 Q17 Q19 Q20 Q2 Q3 R1 C1 Q4 IN(-) Q18 Q1 R2 IN(+) Q11 OUTPUT Q21 Q15 Q10 Q7 Q13 Q8 Q14 Q9 Q16 GND Absolute Maximum Ratings Parameter Symbol LM258/LM258A LM358/LM358A LM2904 Unit VCC ±16 or 32 ±16 or 32 ±13 or 26 V VI(DIFF) 32 32 26 V Input Voltage VI -0.3 to +32 -0.3 to +32 -0.3 to +26 V Output Short Circuit to GND VCC≤15V, TA = 25°C(One Amp) - Continuous Continuous Continuous - Operating Temperature Range TOPR -25 ~ +85 0 ~ +70 -40 ~ +85 °C Storage Temperature Range TSTG -65 ~ +150 -65 ~ +150 -65 ~ +150 °C Supply Voltage Differential Input Voltage 2
LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Vcc = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter Symbol Input Offset Voltage VIO Input Offset Current IIO Input Bias Current Input Voltage Range Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω LM258 LM358 LM2904 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit - 2.9 5.0 - 2.9 7.0 - 2.9 7.0 mV - - 3 30 - 5 50 - 5 50 nA IBIAS - - 45 150 - 45 250 - 45 250 nA VI(R) VCC = 30V (LM2904, VCC=26V) 0 - Vcc -1.5 0 - Vcc -1.5 0 - Vcc -1.5 V RL = ∞, VCC = 30V (LM2904, VCC=26V) - 0.8 2.0 - 0.8 2.0 - 0.8 2.0 mA RL = ∞, VCC = 5V - 0.5 1.2 - 0.5 1.2 - 0.5 1.2 mA VCC = 15V, RL= 2kΩ VO(P) = 1V to 11V 50 100 - 25 100 - 25 100 - V/mV - - 26 - - 22 - - V 28 - 27 28 - 23 24 - V Supply Current ICC Large Signal Voltage Gain GV VO(H) Output Voltage Swing VCC=30V RL = 2kΩ 26 (VCC RL= =26V for 27 10kΩ LM2904) VO(L) VCC = 5V, RL= 10kΩ - 5 20 - 5 20 - 5 20 mV Common-Mode Rejection Ratio CMRR - 70 85 - 65 80 - 50 80 - dB Power Supply Rejection Ratio PSRR - 65 100 - 65 100 - 50 100 - dB - 120 - - 120 - - 120 - dB - 40 60 - 40 60 - 40 60 mA 20 30 - 20 30 - 20 30 - mA VI(+) = 0V, VI(-) = 1V, VCC = 15V, VO(P) = 2V 10 15 - 10 15 - 10 15 - mA VI(+) = 0V,VI(-) =1V , VCC = 15V, VO(P) = 200mV 12 100 - 12 100 - - - - µA - - - VCC - - VCC - - VCC V Channel Separation CS Short Circuit to GND ISC f = 1kHz to 20kHz (Note1) - VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V Output Current ISINK Differential Input Voltage VI(DIFF) Note: 1. This parameter, although guaranteed, is not 100% tested in production. 3
LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC= 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25°C ≤ TA ≤ +85°C for the LM258; and the 0°C ≤ TA ≤ +70°C for the LM358; and the -40°C ≤ TA ≤ +85°C for the LM2904 Parameter Symbol Conditions LM258 LM358 LM2904 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω - - 7.0 - - 9.0 - - 10.0 mV RS = 0Ω - 7.0 - - 7.0 - - 7.0 - µV/°C - - - 100 - - 150 - 45 200 nA ∆IIO/∆T - - 10 - - 10 - - 10 - pA/°C IBIAS - - 40 300 - 40 500 - 40 500 nA VCC = 30V (LM2904 , VCC = 26V) 0 - Vcc -2.0 0 - Vcc -2.0 0 - Vcc -2.0 V VCC = 15V, RL =2.0kΩ VO(P) = 1V to 11V 25 - - 15 - - 15 - - V/mV 26 - - 26 - - 22 - - V VO(H) VCC=30V RL = 2kΩ (VCC = 26V for RL=10kΩ LM2904) 27 28 - 27 28 - 23 24 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 20 - 5 20 mV VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V 10 30 - 10 30 - 10 30 - mA VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 5 8 - 5 9 - 5 9 - mA - - VCC - - VCC - - VCC V Input Offset Voltage VIO Input Offset Voltage Drift ∆VIO/∆T Input Offset Current IIO Input Offset Current Drift Input Bias Current Input Voltage Range VI(R) Large Signal Voltage Gain GV Output Voltage Swing Output Current ISINK Differential Input Voltage 4 VI(DIFF) -
LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter Symbol Input Offset Voltage VIO Input Offset Current VI(R) Supply Current ICC Large Signal Voltage Gain GV Max. Min. Typ. Max. Unit 1.0 3.0 - 2.0 3.0 mV - - 2 15 - 5 30 nA - - 40 80 - 45 100 nA VCC = 30V 0 - VCC -1.5 0 - VCC -1.5 V RL = ∞,VCC = 30V - 0.8 2.0 - 0.8 2.0 mA RL = ∞, VCC = 5V - 0.5 1.2 - 0.5 1.2 mA 50 100 - 25 100 - V/mV RL = 2kΩ 26 - - 26 - - V RL =10kΩ 27 28 - 27 28 - V - 5 20 - 5 20 mV VCC = 15V, RL= 2kΩ VO = 1V to 11V VOH VCC = 30V VO(L) Output Voltage Swing Min. Typ. LM358A - IBIAS Input Voltage Range LM258A VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω IIO Input Bias Current Conditions VCC = 5V, RL=10kΩ Common-Mode Rejection Ratio CMRR - 70 85 - 65 85 - dB Power Supply Rejection Ratio PSRR - 65 100 - 65 100 - dB Channel Separation CS f = 1kHz to 20kHz (Note1) - 120 - - 120 - dB Short Circuit to GND ISC - - 40 60 - 40 60 mA VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 20 30 - 20 30 - mA VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 15 - 10 15 - mA Vin + = 0V, Vin (-) = 1V VO(P) = 200mV 12 100 - 12 100 - µA - - VCC - - VCC V ISOURCE Output Current ISINK Differential Input Voltage VI(DIFF) - Note: 1. This parameter, although guaranteed, is not 100% tested in production. 5
LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25°C ≤ TA ≤ +85°C for the LM258A; and the 0°C ≤ TA ≤ +70°C for the LM358A Parameter Input Offset Voltage Input Offset Voltage Drift Input Offset Current Symbol VIO Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω LM258A LM358A Min. Typ. Max. Min. Typ. Max. Unit - - 4.0 - - 5.0 mV ∆VIO/∆T - - 7.0 15 - 7.0 20 µV/°C IIO - - - 30 - - 75 nA ∆IIO/∆T - - 10 200 - 10 300 pA/°C Input Bias Current IBIAS - - 40 100 - 40 200 nA Input Common-Mode Voltage Range VI(R) VCC = 30V 0 - Vcc -2.0 0 - Vcc -2.0 V VO(H) VCC = 30V RL = 2kΩ 26 - - 26 - - V RL = 10kΩ 27 28 - 27 28 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 20 mV Input Offset Current Drift Output Voltage Swing GV VCC = 15V, RL=2.0kΩ VO(P) = 1V to 11V 25 - - 15 - - V/mV ISOURCE VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 30 - 10 30 - mA ISINK Large Signal Voltage Gain VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 5 9 - 5 9 - mA - - VCC - - VCC V Output Current Differential Input Voltage 6 VI(DIFF) -
LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics Figure 1. Supply Current vs Supply Voltage Figure 2. Voltage Gain vs Supply Voltage Figure 3. Open Loop Frequency Response Figure 4. Large Signal Output Swing vs Frequency Figure 5. Output Characteristics vs Current Sourcing Figure 6. Output Characteristics vs Current Sinking 7
LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics (Continued) Figure 7. Input Voltage Range vs Supply Voltage Figure 8. Common-Mode Rejection Ratio Figure 9. Output Current vs Temperature (Current Limiting) Figure 10. Input Current vs Temperature Figure 11. Voltage Follower Pulse Response Figure 12. Voltage Follower Pulse Response (Small Signal) 8
LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions Package Dimensions in millimeters #4 #5 2.54 0.100 9.20 ±0.20 0.362 ±0.008 #8 9.60 MAX 0.378 #1 1.524 ±0.10 0.060 ±0.004 0.46 ±0.10 ( 6.40 ±0.20 0.252 ±0.008 0.018 ±0.004 0.79 ) 0.031 8-DIP 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 3.30 ±0.30 0.130 ±0.012 0.33 MIN 0.013 +0.10 0.25 –0.05 +0.004 0~15° 0.010 –0.002 9
LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 #5 6.00 ±0.30 0.236 ±0.012 10 0.41 ±0.10 0.016 ±0.004 MAX0.10 MAX0.004 8° 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 0.50 ±0.20 0.020 ±0.008 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 1.27 0.050 #4 4.92 ±0.20 0.194 ±0.008 #8 5.13 MAX 0.202 #1
LM2904,LM358/LM358A,LM258/LM258A Ordering Information Product Number LM358N LM358AN LM358M LM358AM Package 8-DIP 0 ~ +70°C 8-SOP LM2904N 8-DIP LM2904M 8-SOP LM258N LM258AN LM258M LM258AM Operating Temperature -40 ~ +85°C 8-DIP -25 ~ +85°C 8-SOP 11
LM2904,LM358/LM358A,LM258/LM258A DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 8/26/02 0.0m 001 Stock#DSxxxxxxxx  2002 Fairchild Semiconductor Corporation
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.

More Related Content

Lm358

  • 1. www.fairchildsemi.com LM2904,LM358/LM358A,LM258/ LM258A Dual Operational Amplifier Features Description • Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain: 100dB • Wide Power Supply Range: LM258/LM258A, LM358/LM358A: 3V~32V (or ±1.5V ~ 16V) LM2904 : 3V~26V (or ±1.5V ~ 13V) • Input Common Mode Voltage Range Includes Ground • Large Output Voltage Swing: 0V DC to Vcc -1.5V DC • Power Drain Suitable for Battery Operation. The LM2904,LM358/LM358A, LM258/LM258A consist of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltage. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifier, DC gain blocks and all the conventional OP-AMP circuits which now can be easily implemented in single power supply systems. 8-DIP 1 8-SOP 1 Internal Block Diagram OUT1 1 IN1 (-) 2 IN1 (+) 3 GND 4 8 7 OUT2 + VCC - 6 IN2 (-) + 5 IN2 (+) Rev. 1.0.2 ©2002 Fairchild Semiconductor Corporation
  • 2. LM2904,LM358/LM358A,LM258/LM258A Schematic Diagram (One section only) VCC Q5 Q12 Q6 Q17 Q19 Q20 Q2 Q3 R1 C1 Q4 IN(-) Q18 Q1 R2 IN(+) Q11 OUTPUT Q21 Q15 Q10 Q7 Q13 Q8 Q14 Q9 Q16 GND Absolute Maximum Ratings Parameter Symbol LM258/LM258A LM358/LM358A LM2904 Unit VCC ±16 or 32 ±16 or 32 ±13 or 26 V VI(DIFF) 32 32 26 V Input Voltage VI -0.3 to +32 -0.3 to +32 -0.3 to +26 V Output Short Circuit to GND VCC≤15V, TA = 25°C(One Amp) - Continuous Continuous Continuous - Operating Temperature Range TOPR -25 ~ +85 0 ~ +70 -40 ~ +85 °C Storage Temperature Range TSTG -65 ~ +150 -65 ~ +150 -65 ~ +150 °C Supply Voltage Differential Input Voltage 2
  • 3. LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Vcc = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter Symbol Input Offset Voltage VIO Input Offset Current IIO Input Bias Current Input Voltage Range Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω LM258 LM358 LM2904 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit - 2.9 5.0 - 2.9 7.0 - 2.9 7.0 mV - - 3 30 - 5 50 - 5 50 nA IBIAS - - 45 150 - 45 250 - 45 250 nA VI(R) VCC = 30V (LM2904, VCC=26V) 0 - Vcc -1.5 0 - Vcc -1.5 0 - Vcc -1.5 V RL = ∞, VCC = 30V (LM2904, VCC=26V) - 0.8 2.0 - 0.8 2.0 - 0.8 2.0 mA RL = ∞, VCC = 5V - 0.5 1.2 - 0.5 1.2 - 0.5 1.2 mA VCC = 15V, RL= 2kΩ VO(P) = 1V to 11V 50 100 - 25 100 - 25 100 - V/mV - - 26 - - 22 - - V 28 - 27 28 - 23 24 - V Supply Current ICC Large Signal Voltage Gain GV VO(H) Output Voltage Swing VCC=30V RL = 2kΩ 26 (VCC RL= =26V for 27 10kΩ LM2904) VO(L) VCC = 5V, RL= 10kΩ - 5 20 - 5 20 - 5 20 mV Common-Mode Rejection Ratio CMRR - 70 85 - 65 80 - 50 80 - dB Power Supply Rejection Ratio PSRR - 65 100 - 65 100 - 50 100 - dB - 120 - - 120 - - 120 - dB - 40 60 - 40 60 - 40 60 mA 20 30 - 20 30 - 20 30 - mA VI(+) = 0V, VI(-) = 1V, VCC = 15V, VO(P) = 2V 10 15 - 10 15 - 10 15 - mA VI(+) = 0V,VI(-) =1V , VCC = 15V, VO(P) = 200mV 12 100 - 12 100 - - - - µA - - - VCC - - VCC - - VCC V Channel Separation CS Short Circuit to GND ISC f = 1kHz to 20kHz (Note1) - VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V Output Current ISINK Differential Input Voltage VI(DIFF) Note: 1. This parameter, although guaranteed, is not 100% tested in production. 3
  • 4. LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC= 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25°C ≤ TA ≤ +85°C for the LM258; and the 0°C ≤ TA ≤ +70°C for the LM358; and the -40°C ≤ TA ≤ +85°C for the LM2904 Parameter Symbol Conditions LM258 LM358 LM2904 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω - - 7.0 - - 9.0 - - 10.0 mV RS = 0Ω - 7.0 - - 7.0 - - 7.0 - µV/°C - - - 100 - - 150 - 45 200 nA ∆IIO/∆T - - 10 - - 10 - - 10 - pA/°C IBIAS - - 40 300 - 40 500 - 40 500 nA VCC = 30V (LM2904 , VCC = 26V) 0 - Vcc -2.0 0 - Vcc -2.0 0 - Vcc -2.0 V VCC = 15V, RL =2.0kΩ VO(P) = 1V to 11V 25 - - 15 - - 15 - - V/mV 26 - - 26 - - 22 - - V VO(H) VCC=30V RL = 2kΩ (VCC = 26V for RL=10kΩ LM2904) 27 28 - 27 28 - 23 24 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 20 - 5 20 mV VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V 10 30 - 10 30 - 10 30 - mA VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 5 8 - 5 9 - 5 9 - mA - - VCC - - VCC - - VCC V Input Offset Voltage VIO Input Offset Voltage Drift ∆VIO/∆T Input Offset Current IIO Input Offset Current Drift Input Bias Current Input Voltage Range VI(R) Large Signal Voltage Gain GV Output Voltage Swing Output Current ISINK Differential Input Voltage 4 VI(DIFF) -
  • 5. LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Parameter Symbol Input Offset Voltage VIO Input Offset Current VI(R) Supply Current ICC Large Signal Voltage Gain GV Max. Min. Typ. Max. Unit 1.0 3.0 - 2.0 3.0 mV - - 2 15 - 5 30 nA - - 40 80 - 45 100 nA VCC = 30V 0 - VCC -1.5 0 - VCC -1.5 V RL = ∞,VCC = 30V - 0.8 2.0 - 0.8 2.0 mA RL = ∞, VCC = 5V - 0.5 1.2 - 0.5 1.2 mA 50 100 - 25 100 - V/mV RL = 2kΩ 26 - - 26 - - V RL =10kΩ 27 28 - 27 28 - V - 5 20 - 5 20 mV VCC = 15V, RL= 2kΩ VO = 1V to 11V VOH VCC = 30V VO(L) Output Voltage Swing Min. Typ. LM358A - IBIAS Input Voltage Range LM258A VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω IIO Input Bias Current Conditions VCC = 5V, RL=10kΩ Common-Mode Rejection Ratio CMRR - 70 85 - 65 85 - dB Power Supply Rejection Ratio PSRR - 65 100 - 65 100 - dB Channel Separation CS f = 1kHz to 20kHz (Note1) - 120 - - 120 - dB Short Circuit to GND ISC - - 40 60 - 40 60 mA VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 20 30 - 20 30 - mA VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 15 - 10 15 - mA Vin + = 0V, Vin (-) = 1V VO(P) = 200mV 12 100 - 12 100 - µA - - VCC - - VCC V ISOURCE Output Current ISINK Differential Input Voltage VI(DIFF) - Note: 1. This parameter, although guaranteed, is not 100% tested in production. 5
  • 6. LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25°C ≤ TA ≤ +85°C for the LM258A; and the 0°C ≤ TA ≤ +70°C for the LM358A Parameter Input Offset Voltage Input Offset Voltage Drift Input Offset Current Symbol VIO Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω LM258A LM358A Min. Typ. Max. Min. Typ. Max. Unit - - 4.0 - - 5.0 mV ∆VIO/∆T - - 7.0 15 - 7.0 20 µV/°C IIO - - - 30 - - 75 nA ∆IIO/∆T - - 10 200 - 10 300 pA/°C Input Bias Current IBIAS - - 40 100 - 40 200 nA Input Common-Mode Voltage Range VI(R) VCC = 30V 0 - Vcc -2.0 0 - Vcc -2.0 V VO(H) VCC = 30V RL = 2kΩ 26 - - 26 - - V RL = 10kΩ 27 28 - 27 28 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 20 mV Input Offset Current Drift Output Voltage Swing GV VCC = 15V, RL=2.0kΩ VO(P) = 1V to 11V 25 - - 15 - - V/mV ISOURCE VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 30 - 10 30 - mA ISINK Large Signal Voltage Gain VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 5 9 - 5 9 - mA - - VCC - - VCC V Output Current Differential Input Voltage 6 VI(DIFF) -
  • 7. LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics Figure 1. Supply Current vs Supply Voltage Figure 2. Voltage Gain vs Supply Voltage Figure 3. Open Loop Frequency Response Figure 4. Large Signal Output Swing vs Frequency Figure 5. Output Characteristics vs Current Sourcing Figure 6. Output Characteristics vs Current Sinking 7
  • 8. LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics (Continued) Figure 7. Input Voltage Range vs Supply Voltage Figure 8. Common-Mode Rejection Ratio Figure 9. Output Current vs Temperature (Current Limiting) Figure 10. Input Current vs Temperature Figure 11. Voltage Follower Pulse Response Figure 12. Voltage Follower Pulse Response (Small Signal) 8
  • 9. LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions Package Dimensions in millimeters #4 #5 2.54 0.100 9.20 ±0.20 0.362 ±0.008 #8 9.60 MAX 0.378 #1 1.524 ±0.10 0.060 ±0.004 0.46 ±0.10 ( 6.40 ±0.20 0.252 ±0.008 0.018 ±0.004 0.79 ) 0.031 8-DIP 5.08 MAX 0.200 7.62 0.300 3.40 ±0.20 0.134 ±0.008 3.30 ±0.30 0.130 ±0.012 0.33 MIN 0.013 +0.10 0.25 –0.05 +0.004 0~15° 0.010 –0.002 9
  • 10. LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 #5 6.00 ±0.30 0.236 ±0.012 10 0.41 ±0.10 0.016 ±0.004 MAX0.10 MAX0.004 8° 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 0.50 ±0.20 0.020 ±0.008 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 1.27 0.050 #4 4.92 ±0.20 0.194 ±0.008 #8 5.13 MAX 0.202 #1
  • 11. LM2904,LM358/LM358A,LM258/LM258A Ordering Information Product Number LM358N LM358AN LM358M LM358AM Package 8-DIP 0 ~ +70°C 8-SOP LM2904N 8-DIP LM2904M 8-SOP LM258N LM258AN LM258M LM258AM Operating Temperature -40 ~ +85°C 8-DIP -25 ~ +85°C 8-SOP 11
  • 12. LM2904,LM358/LM358A,LM258/LM258A DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 8/26/02 0.0m 001 Stock#DSxxxxxxxx  2002 Fairchild Semiconductor Corporation
  • 13. This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.