Mazda 323 Astina BG Modifications

Mazda 323F Eunos 100 BG Astina BG Chassis Familia 323
58 Pins
·
3y
Eunos100 digital dash
Eunos100 digital dash replaced film and LED’s installed. Only taken years to find the time to finally do this job. Will test with a removed loom before install
mazda 323F Mk2 - Blue T-shirt - review, compare prices, buy online
mazda 323F Mk2 - Blue T-shirt
Lazy Eye mod using the unused button location on OEM pop up switch. Remove the black (rectangle) catch, wire and spring. (Bottom right) Install 3 new contact pads (removed from a spare unit) Dremel out space for wire on far left pin (grey wire) Cut board and install wire allowing room to install light. If using demister switch, cut "on light" plastic level and add button with picture you want. Cut 2nd hold in dash surround
*Powder Coated sub frame *SuperPro polyurethane bushes all round *Braided brake lines custom (Power Brakes)
Don't want a V8? How about a 2.0?
McCully Racing Motors- Don't want a V8? How about a 2.0?
Polished GTX manifold. Looked good but wasn't GTR as it had been advertised
Mazda Mx3 (30x) seat base and rails, with bolster supports from the bg sports seat gtx/R or Astina SP and recovered with the sports foam and trim to look factory. Looks like the BA seat base with the mx3 rails will also fit the bg chassis.
Mazda BP cam set readings BP22 inlet cam BP05 Exhaust cam (with CAS) These are from the leaded BP motor and referred to as "rare cams" in Australia.
AWR solid polyethylene engine mounts (88 duro) for the Mazda fwd BG, this set is going into an Astina (323F, Eunos 100). Will also fit the fwd Ford Laser/Escort.
Mazda gear boxes (& Ford Escort/ TX3 AWD) looking at ratios and what setup to go with when comparing RPM.
Eunos 100 Parker/indicator. Different to the Astina as the horizontal lines are actually channels, where the Astina is a flat surface.