Some technical properties (static mechanical properties, dynamic mechanical properties,
creep‐recovery behavior, thermal expansion, and thermal conductivity) of low‐density foams (…

… 3, the structure of the AS surfactant appears to have relatively little influence on the foam
profile as all the foam profiles are very similar. The foam profiles were also found to be virtually …

… two major techniques for extrusion of plastic foam profiles: free foaming (FF) and controlled
… The CELUKA process allows the extrusion of foam profiles at a lower density than other free …

… There is a growing demand for aluminum foam profiles in … foam profiles has become a
pivotal direction for aluminum foam applications. The key to preparing aluminum foam profiles …

… silicone resin foam profiles (left) and SEM images of the Si–O–C ceramic foam profiles after
… The foam profiles obtained demonstrate that the processing technique and the knowledge …

… Flexural properties (ASTM D790) were measured on foam profiles extruded based on the
tin-stabilized formulation. The results are summarized in Table 7. The increase in flexural …

The reinforced aluminium foams prepared by powder metallurgy route (profiles and 3D-structures)
are serious potential candidates for new shell-shape structures with less framing, …

… After reaching a stable test point, foam profiles were taken for … from the centre of the WPC
foam profiles without edge layer. To … The bending properties of the WPC foam profiles were …

… Figure 4 shows the foam profiles obtained with TEGO AFKS911 in fermentation broth of
different culture times. Yeast density started at 2 x 106 cells/mL and reached 1.2 x 108 cells/mL …

… This work investigated the use of two inert-gas PBAs-CO, and Ar-in the development of a
process for the extrusion of RPVC foam profiles. Experimentation was done with commercially …