[BOOK][B] The NIST DMIS Interpreter
TR Kramer, TR Kramer, WG Rippey, H Scott - 1997 - researchgate.net
The NIST DMIS interpreter is a software system which reads control code programs in the
DMIS language (described below in Section 1.2), produces calls to a set of canonical …
DMIS language (described below in Section 1.2), produces calls to a set of canonical …
Run-time interpretation of STEP-NC: implementation and performance
TR Kramer, F Proctor, X Xu… - International Journal of …, 2006 - Taylor & Francis
This paper describes an experiment in building and running two STEP-NC interpreters for
milling operations: one using ISO 14649, the other using AP 238 of ISO 10303. Both use STEP …
milling operations: one using ISO 14649, the other using AP 238 of ISO 10303. Both use STEP …
A feature-based inspection and machining system
TR Kramer, HM Huang, E Messina, FM Proctor… - Computer-Aided …, 2001 - Elsevier
… The FBICS_Task2 process includes version three of the NIST DMIS interpreter and version
three of the 3-axis NIST … The NIST DMIS interpreter version 2, NISTIR 6252. NIST, 1998. …
three of the 3-axis NIST … The NIST DMIS interpreter version 2, NISTIR 6252. NIST, 1998. …
Distributed testing of an equipment-level interface specification
J Horst, T Kramer, K Stouffer… - Proceedings Fifth IEEE …, 2002 - ieeexplore.ieee.org
… a set of command and response classes which are currently being used within the CMM
utility software along with a specification compliant version of the NIST DMIS interpreter. These …
utility software along with a specification compliant version of the NIST DMIS interpreter. These …
[BOOK][B] Distributed testing of a device-level interface specification for a metrology system
J Horst, T Kramer, K Stouffer, J Falco, HM Huang… - 2002 - Citeseer
… compliant command and response classes which are currently being used within the CMM
utility software and a CMM-driver specification compliant version of the NIST DMIS interpreter…
utility software and a CMM-driver specification compliant version of the NIST DMIS interpreter…
[BOOK][B] A Comparison of the CMM-driver Specification Release# 1.9 with the I++ DME-Interface Release 0.9
TR Kramer, J Horst, T Kramer - 2002 - diyhpl.us
This is a comparison of (1) the entire contents of CMM-driver Specification Release# 1.9
and (2) the parts of I++ DME-Interface Release 0.9 that deal with the interface to a driver for …
and (2) the parts of I++ DME-Interface Release 0.9 that deal with the interface to a driver for …
STEP to DMIS: Automated generation of inspection plans from CAD data
SVB Sathi, PVM Rao - 2009 IEEE international conference on …, 2009 - ieeexplore.ieee.org
The present work is concerned with automated generation of process plans for CMM based
part inspection from CAD models. The importance and advantage of the proposed system is …
part inspection from CAD models. The importance and advantage of the proposed system is …
[BOOK][B] Feature-based inspection and control system
TR Kramer, J Horst, H Huang, TR Kramer, ER Messina… - 2004 - diyhpl.us
This report describes an architecture and software system for automatically performing
process planning and control code generation for cutting and inspecting prismatic piece parts. …
process planning and control code generation for cutting and inspecting prismatic piece parts. …
Architecture, design methodology, and component-based tools for a real-time inspection system
JA Horst - Proceedings Third IEEE International Symposium on …, 2000 - ieeexplore.ieee.org
We describe a real-time component-based system for an inspection application. We chose
the inspection application and the accompanying task (or scenario) so that we might fully …
the inspection application and the accompanying task (or scenario) so that we might fully …
[BOOK][B] Analysis of dimensional metrology standards
JM Evans, S Frechette, J Horst, H Huang, T Kramer… - 2001 - tsapps.nist.gov
… A low-level inspection instruction API was defined for the NIST DMIS Interpreter and
implemented in FBICS. Three standardization efforts are currently in progress (CMM-driver …
implemented in FBICS. Three standardization efforts are currently in progress (CMM-driver …