Nothing Special   »   [go: up one dir, main page]

skip to main content
10.5555/3130379.3130797guideproceedingsArticle/Chapter ViewAbstractPublication PagesConference Proceedingsacm-pubtype
research-article
Free access

The case for semi-automated design of microfluidic very large scale integration (mVLSI) chips

Published: 27 March 2017 Publication History

Abstract

In recent years, significant interest has emerged in the problem of fully automating the design of microfluidic very large scale integration (mVLSI) chips, a popular class of Lab-on-a-Chip (LoC) devices that can automatically execute a wide variety of biological assays. To date, this work has been carried out with little to no input from LoC designers. We conducted interviews with approximately 100 LoC designers, biologists, and chemists from academia and industry; uniformly, they expressed frustration with existing design solutions, primarily commercially available software such as AutoCAD and Solidworks; however, they expressed limited interest and considerable skepticism about the potential for "push-button" end-to-end automation. In response, we have developed a semi-automated mVLSI drawing tool that is designed specifically to address the pain points elucidated by our interviewees. We have used this tool to rapidly reproduce several previously published LoC architectures and generate fabrication ready specifications.

References

[1]
M. A. Unger, H.-P. Chou, T. Thorsen, A. Scherer, and S. R. Quake, "Monolithic microfabricated valves and pumps by multilayer soft lithography," Science, vol. 288, no. 5463, pp. 113--116, 2000. {Online}. Available
[2]
T. Thorsen, S. J. Maerkl, and S. R. Quake, "Microfluidic large-scale integration," Science, vol. 298, no. 5593, pp. 580--584, 2002. {Online}. Available
[3]
W. H. Grover, A. M. Skelley, C. N. Liu, E. T. Lagally, and R. A. Mathies, "Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devices," Sensors and Actuators B: Chemical, vol. 89, no. 3, pp. 315 -- 323, 2003. {Online}. Available
[4]
W. H. Grover, R. H. C. Ivester, E. C. Jensen, and R. A. Mathies, "Development and multiplexed control of latching pneumatic valves using microfluidic logical structures." Lab on a chip, vol. 6, no. 5, pp. 623--31, may 2006. {Online}. Available
[5]
I. E. Araci and S. R. Quake, "Microfluidic very large scale integration (mvlsi) with integrated micromechanical valves," Lab Chip, vol. 12, pp. 2803--2806, 2012. {Online}. Available
[6]
S. Blank and B. Dorf, The Startup Owner's Manual: The Step-By-Step Guide for Building a Great Company, 1st ed. K&S Ranch, 2012.
[7]
Q. Wang, Y. Ru, H. Yao, T. Ho, and Y. Cai, "Sequence-pair-based placement and routing for flow-based microfluidic biochips," in 21st Asia and South Pacific Design Automation Conference (ASP-DAC), Macao, January 25--28, 2016, pp. 587--592. {Online}. Available
[8]
T. Tseng, M. Li, B. Li, T. Ho, and U. Schlichtmann, "Columba: co-layout synthesis for continuous-flow microfluidic biochips," in Proceedings of the 53rd Annual Design Automation Conference (DAC), Austin, TX, USA, June 5--9, 2016, pp. 147:1--147:6. {Online}. Available
[9]
H. Yao, T. Ho, and Y. Cai, "PACOR: practical control-layer routing flow with length-matching constraint for flow-based microfluidic biochips," in Proceedings of the 52nd Annual Design Automation Conference (DAC), San Francisco, CA, USA, June 7--11, 2015, pp. 142:1--142:6. {Online}. Available
[10]
J. McDaniel, C. Curtis, and P. Brisk, "Automatic synthesis of microfluidic large scale integration chips from a domain-specific language," in Proceedings of the IEEE Biomedical Circuits and Systems Conference (BioCAS), Rotterdam, The Netherlands, October 31 -- November 2, 2013, pp. 101--104. {Online}. Available
[11]
W. H. Minhass, P. Pop, and J. Madsen, "System-level modeling and synthesis of flow-based microfluidic biochips," in Proceedings of the 14th International Conference on Compilers, Architecture, and Synthesis for Embedded Systems (CASES), Taipei, Taiwan, October 9--14, 2011, pp. 225--234. {Online}. Available
[12]
W. H. Minhass, P. Pop, J. Madsen, and F. S. Blaga, "Architectural synthesis of flow-based microfluidic large-scale integration biochips," in Proceedings of the 15th International Conference on Compilers, Architecture, and Synthesis for Embedded Systems (CASES), Tampere, Finland, October 7--12, 2012, pp. 181--190. {Online}. Available
[13]
A. R. Wu, J. B. Hiatt, R. Lu, J. L. Attema, N. a. Lobo, I. L. Weissman, M. F. Clarke, and S. R. Quake, "Automated microfluidic chromatin immunoprecipitation from 2,000 cells." Lab on a chip, vol. 9, no. 10, pp. 1365--70, may 2009. {Online}. Available: http://www.ncbi.nlm.nih.gov/ /19417902
[14]
J. McDaniel, A. Baez, B. Crites, A. Tammewar, and P. Brisk, "Design and verification tools for continuous fluid flow-based microfluidic devices," in Proceedings of the 18th Asia and South Pacific Design Automation Conference (ASP-DAC), Yokohama, Japan, January 22--25, 2013, pp. 219--224. {Online}. Available
[15]
R. Sanka, H. Huang, R. Silva, and D. Densmore, "Mint - microfluidic netlist," in Proceedings of the International Workshop on Bio-Design Automation (IWBDA), Poster Presentation, Newcastle upon Tyne, UK, August 16--18, 2016. {Online}. Available: http://cidarlab.org/wp-content/uploads/2016/09/MINT-IWBDA-2016-Poster-Template-copy.pdf
[16]
J. McDaniel, B. Crites, P. Brisk, and W. H. Grover, "Flow-layer physical design for microchips based on monolithic membrane valves," IEEE Design & Test, vol. 32, no. 6, pp. 51--59, 2015. {Online}. Available
[17]
N. Amin, W. Thies, and S. P. Amarasinghe, "Computer-aided design for microfluidic chips based on multilayer soft lithography," in Proceedings of the 27th International Conference on Computer Design (ICCD), Lake Tahoe, CA, USA, October 4--7, 2009, pp. 2--9. {Online}. Available
[18]
W. H. Minhass, P. Pop, J. Madsen, and T. Ho, "Control synthesis for the flow-based microfluidic large-scale integration biochips," in Proceedings of the 18th Asia and South Pacific Design Automation Conference (ASP-DAC), Yokohama, Japan, January 22--25, 2013, pp. 205--212. {Online}. Available
[19]
K. Hu, T. A. Dinh, T. Ho, and K. Chakrabarty, "Control-layer optimization for flow-based mvlsi microfluidic biochips," in Proceedings of the 17th International Conference on Compilers, Architecture and S Synthesis for Embedded Systems (CASES), Uttar Pradesh, India, October 12--17, 2014, pp. 16:1--16:10. {Online}. Available
[20]
R. Sanka, H. Huang, R. Silva, and D. Densmore, "MINT - Microfluidic Netlist Instantiate the Device Defining the Control Layer," in International Workshop on Biological Design Automation, 2015, p. 13.
[21]
E. K. Sackmann, A. L. Fulton, and D. J. Beebe, "The present and future role of microfluidics in biomedical research," Nature, vol. 507, no. 7491, pp. 181--189, 03 2014. {Online}. Available
  1. The case for semi-automated design of microfluidic very large scale integration (mVLSI) chips

    Recommendations

    Comments

    Please enable JavaScript to view thecomments powered by Disqus.

    Information & Contributors

    Information

    Published In

    cover image Guide Proceedings
    DATE '17: Proceedings of the Conference on Design, Automation & Test in Europe
    March 2017
    1814 pages

    Publisher

    European Design and Automation Association

    Leuven, Belgium

    Publication History

    Published: 27 March 2017

    Qualifiers

    • Research-article

    Contributors

    Other Metrics

    Bibliometrics & Citations

    Bibliometrics

    Article Metrics

    • 0
      Total Citations
    • 72
      Total Downloads
    • Downloads (Last 12 months)51
    • Downloads (Last 6 weeks)10
    Reflects downloads up to 17 Nov 2024

    Other Metrics

    Citations

    View Options

    View options

    PDF

    View or Download as a PDF file.

    PDF

    eReader

    View online with eReader.

    eReader

    Login options

    Media

    Figures

    Other

    Tables

    Share

    Share

    Share this Publication link

    Share on social media