|
1.
|
The PSI positron production project
/ Vallis, Nicolas (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Craievich, Paolo (PSI, Villigen) ; Schaer, Mattia (PSI, Villigen) ; Zennaro, Riccardo (PSI, Villigen) ; Auchmann, Bernhard (PSI, Villigen) ; Besana, Maria Ilaria (PSI, Villigen) ; Duda, Michal (PSI, Villigen) ; Fortunati, Reto (PSI, Villigen) ; Garcia Rodrigues, Henrique (PSI, Villigen) ; Hauenstein, Dominique (PSI, Villigen) et al.
The PSI Positron Production experiment, known as $\text{P}^{3}$ or $\textit{P-cubed}$, is a proof-of-principle positron source and capture system that can greatly improve the state-of-the-art positron yield. The $\text{P}^{3}$ project is led by the Paul Scherrer Institute in Switzerland, and addresses the long-standing challenge faced by conventional injector facilities to generate, capture, and damp the emittance of high-current positron beam, which is a major limiting factor for the feasibility of future electron-positron colliders. [...]
2024 - 4 p.
- Published in : JACoW IPAC 2024 (2024) TUPC50
Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC50
|
|
|
2.
|
Beam-based commissioning of a novel X-band transverse deflection structure with variable polarization
/ González Caminal, P (DESY) ; Christie, F (DESY) ; D'Arcy, R (DESY) ; Jaster-Merz, S M (DESY) ; Assmann, R (DESY) ; Burkart, F (DESY) ; Conrad, B (DESY) ; Dinter, H (DESY) ; Foese, M (DESY) ; Herrmann, J (DESY) et al.
Longitudinal electron-beam diagnostics play a critical role in the operation and control of x-ray free-electron lasers, which rely on parameters such as the current profile, the longitudinal phase space, or the slice emittance of the particle distribution. On the one hand, the femtosecond-scale electron bunches produced at these facilities impose stringent requirements on the resolution achievable with the diagnostics. [...]
2024 - 19 p.
- Published in : Phys. Rev. Accel. Beams 27 (2024) 032801
Fulltext: PDF;
|
|
|
3.
|
|
|
The P$^3$ Experiment: A Positron Source Demonstrator for Future Lepton Colliders
/ Vallis, N. (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Craievich, P. (PSI, Villigen) ; Schär, M. (PSI, Villigen) ; Zennaro, R. (PSI, Villigen) ; Auchmann, B. (PSI, Villigen ; CERN) ; Braun, H.H. (PSI, Villigen) ; Besana, M.I. (PSI, Villigen) ; Duda, M. (PSI, Villigen) ; Fortunati, R. (PSI, Villigen) ; Garcia-Rodrigues, H. (PSI, Villigen) et al.
The PSI Positron Production (P$^3$ or P-cubed) experiment is a demonstrator for a e+ source and capture system with potential to improve the state-of-the-art e+ yield by an order of magnitude. [...]
arXiv:2308.16803.
-
16 p.
Fulltext
|
|
|
4.
|
The FCCee Pre-Injector Complex
/ Craievich, Paolo (PSI, Villigen) ; Alharthi, Fahad (IJCLab, Orsay) ; Auchmann, Bernhard (PSI, Villigen) ; Bartmann, Wolfgang (CERN) ; Benedikt, Michael (CERN) ; Besana, Maria Ilaria (CERN) ; Bettoni, Simona (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Calviani, Marco (CERN) ; Chaikovska, Iryna (IJCLab, Orsay) et al.
The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. [...]
2022 - 4 p.
- Published in : JACoW IPAC 2022 (2022) 2007-2010
Fulltext: PDF;
In : 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, 12 - 17 Jun 2022, pp.2007-2010
|
|
|
5.
|
The PolariX-TDS Project: Bead-Pull Measurements and High-Power Test on the Prototype
/ Craievich, Paolo (PSI, Villigen) ; Aßmann, Ralph (DESY) ; Bopp, Markus (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Catalán Lasheras, Nuria (CERN) ; Christie, Florian (DESY) ; Citterio, Alessandro (PSI, Villigen) ; D'Arcy, Richard (DESY) ; Dorda, Ulrich (DESY) ; Foese, Manon (DESY) et al.
A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X- band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. The prototype of the novel X-band TDS, the Polarizable X-band (PolariX) TDS, was fabricated at PSI following the high-precision tuning-free production process developed for the C-band Linac of the SwissFEL project. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-FEL2019-WEP036
Fulltext: PDF;
In : 39th International Free Electron Laser Conference, Hamburg, Germany, 26 - 30 Aug 2019, pp.WEP036
|
|
|
6.
|
Experimental demonstration of novel beam characterization using a polarizable X-band transverse deflection structure
/ Marchetti, B (DESY ; European XFEL, Hamburg) ; Grudiev, A (CERN) ; Craievich, P (PSI, Villigen) ; Assmann, R (DESY) ; Braun, H H (PSI, Villigen) ; Catalan Lasheras, N (CERN) ; Christie, F (DESY) ; D'Arcy, R (DESY) ; Fortunati, R (PSI, Villigen) ; Ganter, R (PSI, Villigen) et al.
The PolariX TDS (Polarizable X-Band Transverse Deflection Structure) is an innovative TDS-design operating in the X-band frequency-range. The design gives full control of the streaking plane, which can be tuned in order to characterize the projections of the beam distribution onto arbitrary transverse axes. [...]
2021 - 14 p.
- Published in : Sci. Rep. 11 (2021) 3560
Fulltext: PDF;
|
|
|
7.
|
Novel $X$ -band transverse deflection structure with variable polarization
/ Craievich, P (PSI, Villigen) ; Bopp, M (PSI, Villigen) ; Braun, H H (PSI, Villigen) ; Citterio, A (PSI, Villigen) ; Fortunati, R (PSI, Villigen) ; Ganter, R (PSI, Villigen) ; Kleeb, T (PSI, Villigen) ; Marcellini, F (PSI, Villigen) ; Pedrozzi, M (PSI, Villigen) ; Prat, E (PSI, Villigen) et al.
A collaboration between DESY, PSI and CERN has developed and built an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. The prototype of the novel X-band TDS, the polarizable $X$-band (PolariX) TDS, was fabricated at PSI following the high-precision tuning-free production process developed for the C-band Linac of the SwissFEL project. [...]
2020 - 22 p.
- Published in : Phys. Rev. Accel. Beams 23 (2020) 112001
Fulltext: PDF;
|
|
|
8.
|
Sub-Femtosecond Time-Resolved Measurements Based on a Variable Polarization X-Band Transverse Deflecting Structures for SwissFEL
/ Craievich, Paolo (PSI, Villigen) ; Aßmann, Ralph (DESY) ; Bopp, Markus (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Catalán Lasheras, Nuria (CERN) ; Christie, Florian (DESY) ; D'Arcy, Richard (DESY) ; Ganter, Romain (PSI, Villigen) ; Grudiev, Alexej (CERN) ; Marchetti, Barbara (DESY) et al.
The SwissFEL project, under commissioning at the Paul Scherrer Institut (PSI), will produce FEL radiation for soft and hard X-rays with pulse durations ranging from a few to several tens of femtoseconds. A collaboration between DESY, PSI and CERN has been established with the aim of developing and building an advanced X-Band transverse deflector structure (TDS) with the new feature of providing variable polarization of the deflecting force. [...]
2018 - 4 p.
- Published in : 10.18429/JACoW-FEL2017-WEP040
Fulltext: PDF;
In : 38th International Free Electron Laser Conference, Santa Fe, New Mexico, USA, 20 - 25 Aug 2017, pp.WEP040
|
|
|
9.
|
Publication
|
|
10.
|
Status of the Polarix-TDS Project
/ Craievich, Paolo (PSI, Villigen) ; Aßmann, Ralph (DESY) ; Bopp, Markus (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Catalán Lasheras, Nuria (CERN) ; Christie, Florian (DESY) ; D'Arcy, Richard (DESY) ; Dorda, Ulrich (DESY) ; Foese, Manon (DESY) ; Ganter, Romain (PSI, Villigen) et al.
A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. This innovative CERN design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field. [...]
CERN-ACC-2018-157.-
2018 - 4 p.
- Published in : 10.18429/JACoW-IPAC2018-THPAL068
Fulltext: PDF;
In : 9th International Particle Accelerator Conference, Vancouver, Canada, 29 Apr - 4 May 2018, pp.THPAL068
|
|