|
1.
|
The PSI positron production project
/ Vallis, Nicolas (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Craievich, Paolo (PSI, Villigen) ; Schaer, Mattia (PSI, Villigen) ; Zennaro, Riccardo (PSI, Villigen) ; Auchmann, Bernhard (PSI, Villigen) ; Besana, Maria Ilaria (PSI, Villigen) ; Duda, Michal (PSI, Villigen) ; Fortunati, Reto (PSI, Villigen) ; Garcia Rodrigues, Henrique (PSI, Villigen) ; Hauenstein, Dominique (PSI, Villigen) et al.
The PSI Positron Production experiment, known as $\text{P}^{3}$ or $\textit{P-cubed}$, is a proof-of-principle positron source and capture system that can greatly improve the state-of-the-art positron yield. The $\text{P}^{3}$ project is led by the Paul Scherrer Institute in Switzerland, and addresses the long-standing challenge faced by conventional injector facilities to generate, capture, and damp the emittance of high-current positron beam, which is a major limiting factor for the feasibility of future electron-positron colliders. [...]
2024 - 4 p.
- Published in : JACoW IPAC 2024 (2024) TUPC50
Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC50
|
|
|
2.
|
Update on the FCC-ee positron source design studies
/ Chaikovska, Iryna (IJCLab, Orsay) ; Bacci, Alberto (INFN, Milan) ; Latina, Andrea (CERN) ; Lechner, Anton (CERN) ; Perillo Marcone, Antonio (CERN) ; Humann, Barbara (CERN) ; Auchmann, Bernhard (PSI, Villigen) ; Alharthi, Fahad (IJCLab, Orsay ; KACST, Riyadh) ; Kosse, Jaap (PSI, Villigen) ; Grenard, Jean-Louis (CERN) et al.
The studies and R&D; on the high-intensity positron source for the FCC-ee have been initiated for a while. The positrons are produced by a 6 GeV electron drive-beam incident on a target-converter at 200 Hz. [...]
2023 - 4 p.
- Published in : JACoW IPAC 2023 (2023) MOPL095
Fulltext: PDF;
In : 14th International Particle Accelerator Conference (IPAC 2023), Venice, Italy, 7 - 12 May 2023, pp.MOPL095
|
|
|
3.
|
|
|
4.
|
Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device
/ Zhao, Yongke (CERN) ; Auchmann, Bernhard (PSI, Villigen) ; Chaikovska, Iryna (IJCLab, Orsay) ; Chehab, Robert (IJCLab, Orsay) ; Craievich, Paolo (PSI, Villigen) ; Döbert, Steffen (CERN) ; Duda, Michal (Cracow, INP) ; Kosse, Jaap (PSI, Villigen) ; Latina, Andrea (CERN) ; Martyshkin, Pavel (Novosibirsk, IYF) et al.
In this paper, we present the simulation and optimisation of the FCC-ee positron source, where a high-temperature superconducting (HTS) solenoid is used as the matching device to collect positrons from the target. The "conventional" target scheme is used which simply consists of amorphous tungsten. [...]
2022 - 4 p.
- Published in : JACoW IPAC 2022 (2022) 2003-2006
Fulltext: PDF;
In : 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, 12 - 17 Jun 2022, pp.2003-2006
|
|
|
5.
|
The FCCee Pre-Injector Complex
/ Craievich, Paolo (PSI, Villigen) ; Alharthi, Fahad (IJCLab, Orsay) ; Auchmann, Bernhard (PSI, Villigen) ; Bartmann, Wolfgang (CERN) ; Benedikt, Michael (CERN) ; Besana, Maria Ilaria (CERN) ; Bettoni, Simona (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Calviani, Marco (CERN) ; Chaikovska, Iryna (IJCLab, Orsay) et al.
The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. [...]
2022 - 4 p.
- Published in : JACoW IPAC 2022 (2022) 2007-2010
Fulltext: PDF;
In : 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, 12 - 17 Jun 2022, pp.2007-2010
|
|
|
6.
|
Powering Performance and Endurance Beyond Design Limits of HL-LHC Low-Beta Quadrupole Model Magnets
/ Mangiarotti, Franco J (CERN) ; Ferradas Troitino, Salvador (CERN) ; Duda, Michal (Cracow, INP) ; Bajko, Marta (CERN) ; Bottura, Luca (CERN) ; Desbiolles, Vincent (CERN) ; Elekes, Gyopar (Babes-Bolyai U.) ; Ferradas Troitino, Jose (METROLAB, Geneva ; CERN) ; Feuvrier, Jerome (CERN) ; Ferracin, Paolo (LBNL, Berkeley) et al.
For the High Luminosity Upgrade project (HL-LHC) of the CERN Large Hadron Collider (LHC), lower β* quadrupole magnets based on advanced Nb 3 Sn conductors will be installed on each side of the ATLAS and CMS interaction points. To quantify the endurance and technological limits of these magnets, beyond their maximum operational conditions, two short length model magnets have been extensively tested at the CERN SM18 test facility. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4000805
|
|
|
7.
|
Quench Protection Studies for the High Luminosity LHC Nb$_3$Sn Quadrupole Magnets
/ Ravaioli, Emmanuele (CERN) ; Ambrosio, Giorgio (Fermilab) ; Bajas, Hugues (CERN) ; Duda, Michal (PSI, Villigen ; CERN) ; Ferracin, Paolo (LBNL, Berkeley) ; Ferradas Troitino, Jose (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Mangiarotti, Franco (CERN) ; Marinozzi, Vittorio (Fermilab) ; Mentink, Matthias (CERN) et al.
Achieving the targets of the High Luminosity LHC project requires the installation of new inner triplet magnet circuits for the final focusing of the particle beams on each side of the two main interaction points. Each of the four circuits will include six 150 mm aperture, 132.2 T/m gradient, Nb$_3$Sn quadrupole magnets to be installed in the LHC tunnel. [...]
FERMILAB-PUB-21-124-TD.-
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4700405
Fulltext from Publisher: PDF;
|
|
|
8.
|
Test of the First Full-Length Prototype of the HL-LHC D2 Orbit Corrector Based on Canted Cosine Theta Technology
/ Mangiarotti, Franco J (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Fiscarelli, Lucio (CERN) ; Kirby, Glyn (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent ; Feuvrier, Jerome (CERN) ; Guyon, Jean-Luc (CERN) ; Mazet, Jacky (CERN) et al.
In the context of CERN's high-luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC), a new double aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These 2.2 m long NbTi dipoles are built with the canted cosine theta (CCT) technique. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4000505
|
|
|
9.
|
|
|
10.
|
Power test of the second-generation Compact Linear Collider (CLIC) Nb$_3$Sn damping wiggler short model
/ Duda, Michal (Cracow, INP ; CERN) ; Mangiarotti, Franco (CERN) ; Bajko, Marta (CERN) ; Bernhard, Axel (KIT, Karlsruhe) ; Desbiolles, Vincent (CERN) ; Ferracin, Paolo (CERN) ; Feuvrier, Jerome (CERN) ; Garcia Fajardo, Laura (LBL, Berkeley) ; Lorenzo, Jose (CERN) ; Mazet, Jacky (CERN) et al.
In the frame of the compact linear collider project, a high-field short-period superconducting damping wigglers will be required to reduce the emittance of the electron and positron beams. The use of Nb$_3$Sn as superconducting material is being investigated, as a valid option for its smaller size and increased working margin. [...]
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4100405
|
|