CERN Accelerating science

Article
Title	Chapter 6: Superconducting Magnet Technology for the IR Upgrade
Author(s)	Todesco, E (CERN) ; Ambrosio, G (Fermilab) ; Ferracin, P (LBL, Berkeley) ; Sabbi, G L (SLAC) ; Nakamoto, T (KEK, Tsukuba) ; Sugano, M (KEK, Tsukuba) ; Weelderen, R Van (CERN) ; Fabbricatore, P (INFN, Genoa) ; Farinon, S (INFN, Genoa) ; Toral, F (Madrid, CIEMAT) ; Sorbi, M (LASA, Segrate) ; Statera, M (LASA, Segrate) ; Xu, Q (Beijing, Inst. High Energy Phys.) ; Rifflet, J M (Saclay) ; Felice, H (Saclay)
Publication	2024
Number of pages	33
In:	Adv. Ser. Direct. High Energy Phys. 31 (2024) 165-197
In:	The High Luminosity Large Hadron Collider, pp.165-197
DOI	10.1142/9789811278952_0006
Subject category	Accelerators and Storage Rings
Accelerator/Facility, Experiment	CERN LHC
Project	CERN HL-LHC
Abstract	In this section we present the magnet technology for the High Luminosity LHC. After a short review of the project targets and constraints, we discuss the main guidelines used to determine the technology, the field/gradients, the operational margins, and the choice of the current density for each type of magnet. Then we discuss the peculiar aspects of the design of each class of magnet, with special emphasis on the triplet.
Copyright/License	© 2024 The Editor(s) (License: CC-BY-NC-4.0)

Corresponding record in: Inspire