Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

ATLAS Slides
Report number ATL-TILECAL-SLIDE-2020-392
Title Radiation hardness of the ATLAS Tile Calorimeter optical components
Author(s) Pinheiro Pereira, Beatriz Catarina (Laboratorio de Instrumenta\c{c}\~ao e Fisica Experimental de Particulas - LIP, Lisbon)
Corporate author(s) The ATLAS collaboration
Collaboration ATLAS Collaboration
Submitted to 5th International Conference on Particle Physics and Astrophysics (ICPPA)
Submitted by beatriz.catarina.pinheiro.pereira@cern.ch on 12 Oct 2020
Subject category Particle Physics - Experiment
Accelerator/Facility, Experiment CERN LHC ; ATLAS
Abstract The Tile Calorimeter (TileCal) is a sampling hadronic calorimeter and an essential part of the ATLAS experiment at the LHC. The active material is made of plastic scintillating tiles, and the light produced in the scintillators is transmitted to the photomultiplier tubes by wavelength shifting fibres. During the High Luminosity LHC (HL-LHC) program, the luminosity can reach a value seven times higher than the one that TileCal was designed for. Two critical points that affect the detector performance are the increased exposure to radiation that will degrade the TileCal optics and natural ageing. Since the optical components of the TileCal cannot be replaced, the radiation hardness must be evaluated. The Laser and Caesium are two calibration systems used to evaluate the robustness of the TileCal optical components, taking advantage of these systems it is possible to isolate the response of the tiles and fibres and evaluate the evolution of the light yield with the dose. Run 2 data was analysed, indicating that cells in layer A, and B11 and C10 cells have already lost about 5\% of light yield. No significant changes were found for the other cells. This study constitutes an essential step for predicting the calorimeter performance in future HL-LHC runs. Nevertheless, the extrapolation uncertainty is large, more data needs to be explored to reach better precision on such extrapolation.



 Record created 2020-10-12, last modified 2020-10-12