| Accueil > Magnetic Field Measurement of 2-m-Long Model of Beam Separation Dipole for the HL-LHC Upgrade |
| Published Articles | |
| Title | Magnetic Field Measurement of 2-m-Long Model of Beam Separation Dipole for the HL-LHC Upgrade |
| Related title | Magnetic Field Measurement of 2-m-Long Model of Beam Separation Dipole for the HL-LHC Upgrade |
| Author(s) | Enomoto, Shun (KEK, Tsukuba) ; Sugano, Michinaka (KEK, Tsukuba) ; Nakamoto, Tatsushi (KEK, Tsukuba) ; Okada, Naoki (KEK, Tsukuba) ; Kawamata, Hiroshi (KEK, Tsukuba) ; Sasaki, Ken-ichi (KEK, Tsukuba) ; Tanaka, Kenichi (KEK, Tsukuba) ; Ohhata, Hirokatsu (KEK, Tsukuba) ; Iida, Masahisa (KEK, Tsukuba) ; Okada, Ryutaro (KEK, Tsukuba) ; Takahashi, Naoto (KEK, Tsukuba) ; Sugawara, Shigekatu (KEK, Tsukuba) ; Higashi, Norio (KEK, Tsukuba) ; Ogitsu, Toru (KEK, Tsukuba) ; Kimura, Nobuhiro (KEK, Tsukuba) ; Musso, Andrea (CERN) ; Todesco, Ezio (CERN) |
| Publication | 2017 |
| Number of pages | 5 |
| In: | IEEE Trans. Appl. Supercond. 27 (2017) 0600705 |
| In: | Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.0600705 |
| DOI | 10.1109/TASC.2017.2650958 |
| Subject category | Accelerators and Storage Rings |
| Project | CERN HL-LHC |
| Abstract | Abstract: KEK has been developing a beam separation dipole magnet for the high luminosity large hadron collider upgrade. The magnet has a coil aperture of 150 mm and uses NbTi superconducting cable. A dipole magnetic field of 5.6 T is generated at 12 kA at 1.9 K to provide a field integral of 35 T·m. KEK has started the development of the first 2-m-long model magnet to evaluate the design and performance of the beam separation dipole magnet. The excitation test at 1.9 K of the first 2-m-long model magnet was performed from April to June 2016 at KEK. This paper presents the results of the magnetic field measurements of the first 2-m-long model magnet by a rotating coil probe. |