| Published Articles | |
| Report number | CERN-ACC-2016-131 ; CLIC-Note-1104 |
| Title | High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University |
| Author(s) | Wu, Xiaowei (Tsinghua U., Beijing ; Tsinghua U., Beijing, KLPRI) ; Chen, Huaibi (Tsinghua U., Beijing ; Tsinghua U., Beijing, KLPRI) ; Higo, Toshiyasu (KEK, Tsukuba) ; Matsumoto, Shuji (KEK, Tsukuba) ; Shi, Jiaru (Tsinghua U., Beijing ; Tsinghua U., Beijing, KLPRI) ; Wuensch, Walter (CERN) |
| Publication | 2016 |
| Number of pages | 4 |
| In: | 7th International Particle Accelerator Conference, Busan, Korea, 8 - 13 May 2016, pp.THPOR041 |
| DOI | 10.18429/JACoW-IPAC2016-THPOR041 |
| Subject category | Accelerators and Storage Rings |
| Abstract | A CLIC prototype structure, T24_THU_#1, was recently high-gradient tested at KEK X-band test stand, Nextef. The copper parts of this 24-cell TW structure were delivered from CERN, were bonded and brazed, bench-tested and tuned in Tsinghua University. The aim of this test was not only to verify the cavity high-gradient properties under 100 MV/m but also to study the breakdown phenomenon in high gradient. High power test results were presented and breakdown rate under 100 MV/m was compared to previously-tested CLIC prototype structures. The assembly capability of Tsinghua University for X-band high gradient structures was validated by the good high gradient performance of T24_THU_#1. |
| Copyright/License | publication: © 2016-2024 The Author(s) (License: CC-BY-3.0) |
Corresponding record in: Inspire
Rekord stworzony 2016-08-12, ostatnia modyfikacja 2024-10-25