CERN Accelerating science

Published Articles
Title	Design of a neutrino source based on beta beams
Author(s)	Wildner, E (CERN) ; Hansen, C (CERN) ; Benedetto, E (CERN) ; Jensen, E (CERN) ; Stora, T (CERN) ; Mendonca, T Melo (CERN) ; Vlachoudis, V (CERN) ; Bouquerel, E (Strasbourg, IPHC) ; Marie-Jeanne, M (Grenoble, INP ; LPSC, Grenoble) ; Balint, P (Grenoble, INP ; LPSC, Grenoble) ; Fourel, C (Grenoble, INP ; LPSC, Grenoble) ; Giraud, J (Grenoble, INP ; LPSC, Grenoble) ; Jacob, J (Grenoble, INP ; LPSC, Grenoble) ; Lamy, T (Grenoble, INP ; LPSC, Grenoble) ; Latrasse, L (Grenoble, INP ; LPSC, Grenoble) ; Sortais, P (Grenoble, INP ; LPSC, Grenoble) ; Thuillier, T (Grenoble, INP ; LPSC, Grenoble) ; Mitrofanov, S (Louvain U., CP3) ; Loiselet, M (Louvain U., CP3) ; Keutgen, Th (Louvain U., CP3) ; Delbar, Th (Louvain U., CP3) ; Debray, F (LPSC, Grenoble) ; Trophime, C (LPSC, Grenoble) ; Veys, S (LPSC, Grenoble) ; Daversin, C (LPSC, Grenoble) ; Zorin, V (Nizhnii Novgorod, IAP) ; Izotov, I (Nizhnii Novgorod, IAP) ; Skalyga, V (Nizhnii Novgorod, IAP) ; Chancé, A (IRFU, Saclay) ; Payet, J (IRFU, Saclay) ; Burt, G (Lancaster U.) ; Dexter, A  C (Lancaster U.) ; Kravchuk, V  L (INFN, Legnaro) ; Marchi, T (INFN, Legnaro) ; Cinausero, M (INFN, Legnaro) ; Gramegna, F (INFN, Legnaro) ; Angelis, G De (INFN, Legnaro) ; Prete, G (INFN, Legnaro) ; Collazuol, G (INFN, Padua ; Padua U.) ; Mezzetto, M (INFN, Padua ; Padua U.) ; Vardaci, E (INFN, Naples ; Naples U.) ; Nitto, A Di (INFN, Naples ; Naples U.) ; Brondi, A (INFN, Naples ; Naples U.) ; Rana, G La (INFN, Naples ; Naples U.) ; Moro, R (INFN, Naples ; Naples U.) ; Palladino, V (INFN, Naples ; Naples U.) ; Gelli, N (INFN, Florence) ; Mazzocco, M (INFN, Padua ; Padua U.) ; Signorini, C (INFN, Padua ; Padua U.) ; Hirsh, T  Y (Weizmann Inst. ; Soreq Nucl. Res. Ctr.) ; Hass, M (Weizmann Inst.) ; Berkovits, D (Soreq Nucl. Res. Ctr.) ; Stahl, A (Aachen, Tech. Hochsch.) ; Schaumann, M (Aachen, Tech. Hochsch.) ; Wehner, J (Aachen, Tech. Hochsch.)
Publication	2014
Imprint	2014-07
Number of pages	51
In:	Phys. Rev. Spec. Top. Accel. Beams 17 (2014) 071002
DOI	10.1103/PhysRevSTAB.17.071002
Subject category	Accelerators and Storage Rings
Abstract	``Beta beams'' produce collimated pure electron (anti)neutrino beams by accelerating beta active ions to high energies and having them decay in a racetrack shaped storage ring of 7 km circumference, the decay ring. EUROnu beta beams are based on CERN infrastructures and existing machines. Using existing machines may be an advantage for the cost evaluation, but will also constrain the physics performance. The isotope pair of choice for the beta beam is $^{6}\mathrm{He}$ and $^{18}\mathrm{Ne}$. However, before the EUROnu studies one of the required isotopes, $^{18}\mathrm{Ne}$, could not be produced in rates that satisfy the needs for physics of the beta beam. Therefore, studies of alternative beta emitters, $^{8}\mathrm{Li}$ and $^{8}\mathrm{B}$, with properties interesting for a beta beam have been proposed and have been studied within EUROnu. These alternative isotopes could be produced by using a small storage ring, in which the beam traverses a target, creating the $^{8}\mathrm{Li}$ and $^{8}\mathrm{B}$ isotopes. This production ring, the injection linac and the target system have been evaluated. Measurements of the cross section of the reactions to produce the beta beam isotopes show interesting results. A device to collect the produced isotopes from the target has been developed and tested. However, the yields of $^{8}\mathrm{Li}$ and $^{8}\mathrm{B}$, using the production ring for production of $^{8}\mathrm{Li}$ and $^{8}\mathrm{B}$, is not yet, according to simulations, giving the rates of isotopes that would be needed. Therefore, a new method of producing the $^{18}\mathrm{Ne}$ isotope has been developed and tested giving good production rates. A 60 GHz ECRIS prototype, the first in the world, was developed and tested for ion production with contributions from EUROnu. The decay ring lattices for the $^{8}\mathrm{Li}$ and $^{8}\mathrm{B}$ have been developed and the lattice for $^{6}\mathrm{He}$ and $^{18}\mathrm{Ne}$ has been optimized to ensure the high intensity ion beam stability.
Copyright/License	publication: © 2014-2024 The Author(s) (License: CC-BY-3.0)

Corresponding record in: Inspire