Nothing Special   »   [go: up one dir, main page]

CERN Accelerating science

SY Thesis

Последние добавления:
2024-12-05
13:25
Spectral response of rejuvenated Cs-Te photocathodes for optimized production control / Katona, Palma Klara
Precise control of the Cs-Te stoichiometric deposition ratio during the photocathode fabrication process is essential to optimize the resulting quantum efficiency (QE) and emittance of electron sources [...]
CERN-THESIS-2024-254 - 2024 - 106.


Подробная запись - Подобные записи
2024-11-29
16:54
Design and optimization of higher order mode couplers for the superconducting cavities of the PERLE energy recovery Linac / Barbagallo, Carmelo
The Powerful Energy Recovery Linac for Experiments (PERLE) is an energy recovery linac (ERL) facility based on superconducting radio-frequency (SRF) technology to be hosted at the Laboratoire de Physique des 2 Infinis Irène Joliot-Curie (IJCLab) in France [...]
CERN-THESIS-2024-244 - 2024 - 270.


Подробная запись - Подобные записи
2024-11-20
16:34
A comprehensive analysis of an eddy current septum magnet used for top-up beam injection in the upcoming SOLEIL II particle accelerator upgrade / Plett, Jonathan
Particle accelerators are used to conduct scientific experiments in numerous fields like fundamental physics or medicine, amongst others [...]
CERN-THESIS-2024-231 - 2024 - 61.


Подробная запись - Подобные записи
2024-10-15
15:13
Design and Development of a New ISOLDE Beam Dump / Martin Ruiz, Jose Maria
The CERN ISOLDE facility is currently equipped with two uncooled iron blocks acting as beam dumps [...]
CERN-THESIS-2024-187 - 2024 - 64.


Подробная запись - Подобные записи
2024-09-16
11:27
Developing a Digital Twin of CERN’s Electron Beam Test Bench Based on a Simulator-Independent MBSE System Description / Ganesh, Abhishek
CERN-THESIS-2024-151 - 2024 - 98.


Подробная запись - Подобные записи
2024-09-14
19:44
Investigating $^{225}$Ac production at CERN-MEDICIS: Extraction yield estimation and sample purity / Keppens, Max
This thesis is focused on the separation process of actinium-225, a necessary step in the production method of high energy proton irradiation of a thorium-based target [...]
CERN-THESIS-2024-149 - 2024 - 82.


Подробная запись - Подобные записи
2024-08-27
15:22
Development of a non-invasive beam profile monitor based on hadronic beam-gas interactions for the High Luminosity Large Hadron Collider / Guerin, Helene
Emittance measurement at the Large Hadron Collider (LHC) is a challenging task, due to the high energy and intensity of the accelerated proton and ion beams [...]
CERN-THESIS-2024-126 - 2024 - 208.


Подробная запись - Подобные записи
2024-08-21
09:15
Bridging Monte Carlo Worlds: A New Framework for Accelerator Physics Simulations Applied on Shielding and Machine Protection Studies / Donadon Servelle, Andre
This thesis delves into the critical study of particle transport in matter, particularly emphasising its implications for machine protection at CERN’s accelerator complex and facilities [...]
CERN-THESIS-2024-121 - 2024 - 207.


Подробная запись - Подобные записи
2024-08-20
13:31
Performance of beam collimation for high energy colliders / Potoine, Jean-Baptiste
The LHC heavy-ion program with 208Pb82+ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run 3 [...]
CERN-THESIS-2023-403 - 2023 - 210.


Подробная запись - Подобные записи
2024-08-19
22:41
Numerical simulations of the thermal behavior of Beam Wire Scanners and energy deposition of high energy protons in carbon nanotube microbraids / Abouelenain, Abdelrahman
Various types of beam diagnostics are used in particle accelerators to monitor and control beam parameters such as intensity, energy, time structure, and shape [...]
CERN-THESIS-2024-120 - 2024 - 52.


Подробная запись - Подобные записи